[TheForge] Power hammer anvil

[Daniel Kretchmar]

Hey All,
           My JYC power hammer is walking.  I know why.  The anvil ain't
heavy enough.  I used 6 inch square thick walled tube, .5 inches thick.  I
filled it with sand but that didn't work.  Any ideas on how I can make it
heavier?

Could I cut off the die holder, fill it with melted lead and then reweld the
die holder back on?

suggestions?

Daniel
www.irontreeworks.com

you can see a picture of it at http://www.irontreeworks.com/the_shop.htm