[TheForge] Re: Hydraulic Press

[Bob Ehrenberger]

We don't have any pictures of the dies right now but they are real simple.
The dies mount to a 4" x 6" x 1/4 plate. The plate slides into a holder that
is made by welding 1/4 x 1 x 6" strips to the anvil plate and the ram plate.
The bottom dies just slide in and have a pin that drops in to keep them
there. The top dies have an extra 1/4 x 1 cross bar welded to them with
holes that line up with holes in a similar bar on the top die holder. Once
the top dies are in place just drop a pin through the holes.

We'll try to get some pictures tomorrow.

Bob Ehrenberger
Shelbyville, Mo