[TheForge] re-new topic- tools for journeyman.

Wed Jul 30 08:33:01 2003

At work they have made several similar carts.  Be certain to place the
outlet strips so that they hang down, otherwise the metal fingers of the
plugs get shorted with metal shards.  However, it's also necessary to
have hooks or shelves underneath so that the weight of the cords do not
pull them out as the outlet strips get old and do not hold as firmly.

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of [email protected]
Sent: Wednesday, July 30, 2003 7:15 AM
To: [email protected]
Subject: Re: Re: [TheForge] re-new topic- tools for journeyman.

Bob,
That's sound way too organized me for me <grin>

I had been thinking about a "finishing cart" that would have a power
strip and slots for each grinder. Then I could roll it up to large
projects, roll it back to the table, etc.

Anyone do anything like this???

Ray Miller
Cincinnati
> 
> From: "Bob Ehrenberger" <[email protected]>
> Date: 2003/07/29 Tue PM 11:19:03 EDT
> To: "theforge" <[email protected]>
> Subject: Re: [TheForge] re-new topic- tools for journeyman.
> 
> Ray,
> 
> I have hangers above my welding table.  Very simple,  just heavy guage

> wire with a large open loop that the side handle hooks on.  I have 
> them arranged so the most common used grinder is in front.  If I'm 
> good about hanging each one up as soon as I get done with it the cords

> stay straight.  It's a good idea to hang them up any way because you 
> don't havbe to wait for them to coast down and if you lay it on the 
> table while it is coasting they tend to suck grinder dust into the 
> cooling vents, not good.
> 
> Bob Ehrenberger
> Shelbyville, Mo
> 
> Message: 9
> From: <[email protected]>
> To: <[email protected]>
> Subject: Re: Re: [TheForge] re-new topic- tools for journeyman.
> Date: Tue, 29 Jul 2003 13:04:59 -0400
> Reply-To: [email protected]
> 
> Hey Bob,
> I am also of the multi grinder school, do you have a creative means of

> keep the cords from tangling up as you pick and put down different 
> grinders?
> 
> I find that I need to periodically stop what I'm doing and unplug 
> everything and untangle the cords.
> 
> Ray Miller
> Cincinnati
> 
> 
> _______________________________________________
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is http://www.photoaccess.com
> Login:  [email protected]
> password:  anvil
> ___________
> 
> 
> 

_______________________________________________
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is http://www.photoaccess.com
Login:  [email protected]
password:  anvil
___________