[TheForge] Sidearm burner parts

Thu Jan 16 11:31:05 2003

the smother the better I think. but there is a limit on cost. If it is going
to cost you 4X as much to get a smooth tee and the different in use is not
4X  then to me it is not worth it. I get 2400F at 6psi for a NC,Valley or
any other commercial forge that is usually in the 15-20psi range so I'm
happy. Now someone said they have a burner that works at 8oz of pressure.
That great!  but if I had to spend major $$ to get the different I would
not. The burner I made is 1" and will burn at under a 1# psi but It seems
the most stable and gets me the welding heat at 6psi. So I think you have to
weigh the performance against the cost. Just like any tool. Sometime we need
the  high performance tool sometime the cheep knock off will work
Dan Scheid
Flying horse forge
http://home.earthlink.net/~chevalvolant/flyinghorseforge.html
> Yeah? sounds good, I can get 1 1/4 narrowing to 1", guess I could bush
that
> one then, I kind of thought a gradual taper would have been better than
the
> shoulder the bush must make?
> ----- Original Message -----
> From: "Dan Scheid" <[email protected]>
> To: <[email protected]>
> Sent: 14 January, 2003 11:06 PM
> Subject: Re: [TheForge] Sidearm burner parts
>
>
> > I went with a 1 1/4 tee and then used bushing to get it down in size the
> > current forge is welding at 6PSI
> > Dan Scheid
> > Flying horse forge
> > http://home.earthlink.net/~chevalvolant/flyinghorseforge.html
> > > Im having trouble finding a 1 1/4x 3/4 x 1 1/4 reducing T for my new
> forge
> > > burners here in Australia, are these comonly available elsewhere or is
> > this
> > > a very odd sized T?
> > >
> > > _______________________________________________
> > > http://mailman.qth.net/mailman/listinfo/theforge
> > > theforge mail list group photo site is
> > > http://www.photoaccess.com
> > > Login:  [email protected]
> > > password:  anvil
> > > ___________
> > >
> > >
> > >
> >
> >
> > _______________________________________________
> > http://mailman.qth.net/mailman/listinfo/theforge
> > theforge mail list group photo site is
> > http://www.photoaccess.com
> > Login:  [email protected]
> > password:  anvil
> > ___________
> >
> >
> >
>
> _______________________________________________
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  [email protected]
> password:  anvil
> ___________
>
>
>