[TheForge] (small swedish anvil)To buy or not to buy

Wed Aug 27 16:59:00 2003

Hey

S�derfors,   (Soderfors)  anvils is of very good quality, they all had a
steelplate of app. 10-15 mm thickness welded on top at the manufacturing, so
its possible to ground off the surface without loosing the hardening.

One link , with some pics is aviliable on ( unfortunately its in swedish,
but ...)

http://www.smide.net/

click on     "artiklar"  ,   then click    "st�d"  ,
and finally on  "S�derfors"

js
----- Original Message -----
From: "Sheldon" <[email protected]>
To: <[email protected]>
Sent: Tuesday, August 26, 2003 10:07 PM
Subject: [TheForge] (small swedish anvil)To buy or not to buy

> Hey all,
>
> While on holiday one of my relatives noticed an anvil in a shop and
thought of me. Anyway, she asked the store owner to email some photographs
of the anvil to me so that i could see if i wanted to buy it. It is quite
small, about 20 inches (i hope that is accurate , i normally use metric) and
is badly worn. I will try to post it to photoaccess.com under the tools2
section. I already have a similar sized one but it is not in such bad
condtion.  As you can / will see it is a Goderfors made in Sweden. The
asking price is around $130 US but i could probably get it for less. The
question is, what do you think, should i buy it, is it good, should i pay
less? It would probably be best if i emailed you the pics personally because
i am having trouble with photoaccess.
>
> Thanks in advance for the help
> Sheldon Laing
> Hephaestus Forge
> Cape Town
> South Africa
> [email protected]
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  [email protected]
> password:  anvil
> ___________
>
>