[TheForge] Chemical Questions ?

Wed Oct 16 09:25:01 2002

far as coating try por15.com works better on slightly rusty metal dries hard
and comes off of nothing when dry skin fingers nails ect ect high dollars
but a little goes a long way for instance i qt will do a v.w floor pan 2
coats both sides terry
----- Original Message -----
From: "lama" <[email protected]>
To: <[email protected]>
Sent: Wednesday, October 16, 2002 12:32 AM
Subject: [TheForge] Chemical Questions ?


> I have a couple of old (1930) and very delicate iron panels that need
> refinishing.
> The pieces are 10 feet tall, 3-1/2 feet wide and weigh 175 pounds each.
> These panels were put on display in a room that has an indoor swimming
pool.
> The heavy concentration of chlorine in the atmosphere of the closed room
> caused the iron panels to rust very rapidly and heavily.
> I need to:
> 1. Chemically neutralize the chlorine.
> 2. Chemically remove the rust, old paint, etc.
>
> Any advice greatly appreciated,
> Dave Mudge
>
>
> _______________________________________________
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  [email protected]
> password:  anvil
> ___________
>
>