[TheForge] Copper door cladding

[GHS]

If it is the right customer , this spiel
may just quintuple the price on the
door.<G>

Mike Graf

Dave Bendall wrote:
> 
>      Jeffrey- Since this door will be in Sedona, there may be some other
> things you need to find out. 1. Will it be anywhere near an energy
> vortex? If yes, find out if it's going to be on the 'windward' or 'lee'
> side. If the enrgy is pushing against the cladding, no adhesive will be
> necessary. If it's pushing agast the back of the cladding, no adhesive
> on earth (or Mars) will keep it on for long. 2. Does the customer get
> many UFO visitors? If they use the old Anti-Gavity drive, the copper wll
> warp and buckle like crazy, that's why those UFO's never have copper on
> board. If they use the newer Plasma drive, it won't buckle but it might
> get real hot and melt. 3. How is the customer's Karma? If in a previous
> life he had a lot to do with copper in a bad way, like if he was a slave
> in a copper mine, or cut a foot off with a copper faced adze while
> working on the Great Pyramid in ancient Egypt, then no matter how good a
> job you do something bad could happen after instalation. In that case
> you'd need an indian Shaman to bless your shop and drive away the evil
> copper spirits from his front door. 4. Make sure your Feng Shuey guy is
> a real one, and not one of the many fake ones, as all that copper is
> bound to chage the Feng Shuey of your customers house. You DO have a
> Feng Shuey guy, right?
>      Hope this helps,
>      (Very Big Grin)
>      Dave Bendall in Phoenix
> 
> _______________________________________________
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  blacksmithblacksmith@hotmail.com
> password:  anvil
> ___________

-- 
my website is
http://www.execpc.com/~ghs/