[TheForge] Cutting sheet metal

[Larry and Pat Brown]

A Sawsall would be my choice of weapons. Same concept as a sabre saw but 
more power etc. A worthwhile investment.
Larry Brown
SI,NY


At 05:41 PM 6/12/2002 -0500, you wrote:


> >     Hi Guys;
> >
> >    I need to cut some holes in the side of a metal building for a
> > couple of air conditioners, the metal is fairly heavy, I usually use
> > an abrasive blade in a circular saw, or a plywood blade backwards.
> > BUT... this time it has insulation in a wall cavity under it, not
>the
> > place for sparks.  Saber saw works...sort of, as long as you can
>keep
> > some tension on the metal.
> >
> >    Are there any tools for a mill or anything I could put in my old
> > router and use it like a side cutting bit?  I've seen the little
>side
> > cutting bits for the "rotary saws", but they stop recommending steel
> > at 18 ga.   this measures 0.02 , whatever ga. that is...
> >
> >   Any suggestions before I go buy half a dozen saber saw blades?
> >
> >    Thanks.
> >
> >    Jeff   ><>
>
>
>_______________________________________________
>http://mailman.qth.net/mailman/listinfo/theforge
>theforge mail list group photo site is
>http://www.photoaccess.com
>Login:  blacksmithblacksmith@hotmail.com
>password:  anvil
>___________