[TheForge] compressor setup

Sat Jan 19 11:29:01 2002

Bubba;

   Good idea on the over all plan and great idea for oiling the tools.
    The only things I've ever seen with automatic oilers had them
because they would have gotten neglected without them.  The air system
exhaust on these machines was filthy, drippy dirty messy.  Most oilers
are improperly used and dump way too much oil into the system they are
designed to protect.  The oil formulated to be used in air oilers
seems to be a cleaner.  The insides of everything oiled looked great,
the outside was covered with dirt and oil...

----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Saturday, January 19, 2002 10:12 AM
Subject: Re: [TheForge] compressor setup


> some one asked me what i was doing that needed constant oiling and
at this
> point i think that the hot set up is just to oil the tool when i use
it ....
> or one of the point of use oilers that fit at the tool and not in
the line
> my shop is 30' x 30' and i can easily get an air hose that will
reach
> anyplace in the shop but where i plan to do the most use is 10' +/-
....
> sooooo
> what i think i will do is cut  back on my plans til i have used it
more and
> can better plan the layout....
> all the feedback has been great/useful
> thanks every body
> _______________________________________________
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  [email protected]
> password:  anvil
> ___________
>
>
>