[TheForge] compressor setup

Sat Jan 19 05:56:39 2002

Bubba;

   That is a common configuration for a piece of manufacturing
equipment, there would be no hose between it and the unit it is
protecting, the whole filter/reg/oiler would hang on the machine and
be hard piped.

   In your application, I would separate them and do just as you
suggested, USE as short a hose as possible between your oiler and
tool.

   Jeff   ><>
----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Saturday, January 19, 2002 3:46 AM
Subject: Re: [TheForge] compressor setup

> the moisture / oiler set up i have came in 3 parts,first is the
filter ,next
> regulator and next the oiler... they describe assembling them as one
unit and
> mounting it on a wall or ??? ... i could seperate them and run a "T"
for
> unoiled air but i still will have a good 30' to where the tools that
need oil
> will be used.... sounds like i need one of those small oilers that
hook on
> the end of the line at the tool ??? and do away with the oiler part
of the
> unit i have ??? hummm why would a manufacturer put a unit together
like this
> ???   thanks
> _______________________________________________
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  [email protected]
> password:  anvil
> ___________
>
>
>