[TheForge] Fire pot depth - opinions wanted
Adam Whiteson
[email protected]
Sat Feb 9 12:02:02 2002
How does one manage a coal fire without wetting the coal?
Thanks, Adam
At 01:36 PM 2/8/2002 -0600, you wrote:
>Phil, you have one of the old ones and they must be better. Old is always
>better, you know! My experience comes from the one I burned out which took
>about 3 years and from a friends who's also took about 3 years. I still
>like the firepot well enough that I keep a spare on hand. We do not put
>water on our coal, so that is not the cause of the burn out. I've heard
>smiths at the Ozark Conference say that they quit using water on their coal
>due to the frequency of burnouts or cracking with the Centaur pot. Now that
>is not a lot of experience on my part with them, but it is my experience of
>2 burnouts for 2 pots. I could publish a picture of the last one that
>burned out if you want. It burned a silver $ sized hole in the center of
>one of the big flat sides.
>
>Dick
>
>
>----- Original Message -----
>From: "Phil Rosche" <[email protected]>
>To: <[email protected]>
>Sent: Friday, February 08, 2002 5:42 AM
>Subject: Re: Re: [TheForge] Fire pot depth - opinions wanted - YAK
>
>
> > Dick:
> >
> > My Centaur Vulcan is about 20 years old. When can I expect for it to burn
>out? I'd like to have another one on hand.
> >
> > Phil
> >
> > > Deep pots are, for the long term, overcome with a more powerful fan
>rather
> > > than putting the iron down in the pot. For the relatively small items I
> > > make, I like a 4 1/2" deep pot. Great for burning the oxygen out of the
> > > fire and for forge welding. I like the Centaur high powered blower and
> > > wouldn't use anything less, unless I didn't have one. I also like the
>depth
> > > and size of the standard Centaur fire pot. They are about 4 1/2 " deep
>if
> > > you plug up the end depressions which I do. The big problem with the
> > > Centaur fire pot is that they are thin, approx. 3/8" and burn out much
> > > quicker than some of the 3/4" thick ones. The last firepot I made to
>the
> > > size of the Centaur and made it out of mild steel 5/8" for the big flat
> > > sides and 3/8" for the bottom and ends. Again, here is my 2 cents
>worth.
> > >
> > > Dick
> > >
> > >
> > > ----- Original Message -----
> > > From: "wmullett" <[email protected]>
> > > To: <[email protected]>
> > > Sent: Thursday, February 07, 2002 6:50 PM
> > > Subject: RE: [TheForge] Fire pot depth - opinions wanted
> > >
> > >
> > > > Actually, I think too deep is a problem. If the pot is deep you end
>up
> > > with
> > > > your stock at an angle and one end is always in a bad area. If the
>sides
> > > > aren't cut down already, you'll end up doing it.
> > > >
> > > > On the other hand, if the pot is shallow and as Bruce says, you can
>always
> > > > make it deeper by adding brick around the sides or just mounding up
>your
> > > > coal.
> > > >
> > > > Walt
> > > >
> > > > > -----Original Message-----
> > > > > From: [email protected]
> > > > > [mailto:[email protected]]On Behalf Of Bruce Freeman
> > > > > Sent: Thursday, February 07, 2002 8:56 AM
> > > > > To: [email protected]
> > > > > Subject: Re: [TheForge] Fire pot depth - opinions wanted
> > > > >
> > > > >
> > > > > I've successfully worked small stock (not over 3/4" thick)
> > > > > over pots ranging from 2" to 6" deep. It's not the depth of
> > > > > the pot but the depth of the coal. A flat table with a
> > > > > tuyere pipe would do fine if you piled the coal up high
> > > > > enough for the work at hand. Put a few firebricks around the
> > > > > coal to keep it from spreading across the table and you don't
> > > > > need a pot at all.
> > > > > Bruce Freeman
> > > > >
> > > > > >>> Frederick Faller <[email protected]> 02/06/02 05:43PM >>>
> > > > > OK folks, what is the best depth for a forge firepot.
> > > > >
> > > > > Please support your opinions with reasons :-)
> > > > >
> > > > > Frederick Faller
> > > > >
> > > > > __________________________________________________
> > > > > Do You Yahoo!?
> > > > > Send FREE Valentine eCards with Yahoo! Greetings!
> > > > > http://greetings.yahoo.com
> > > > > _______________________________________________
> > > > > http://mailman.qth.net/mailman/listinfo/theforge
> > > > > theforge mail list group photo site is
> > > > > http://www.photoaccess.com
> > > > > Login: [email protected]
> > > > > password: anvil
> > > > > ___________
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > http://mailman.qth.net/mailman/listinfo/theforge
> > > > > theforge mail list group photo site is
> > > > > http://www.photoaccess.com
> > > > > Login: [email protected]
> > > > > password: anvil
> > > > > ___________
> > > > >
> > > > >
> > > > >
> > > >
> > > > _______________________________________________
> > > > http://mailman.qth.net/mailman/listinfo/theforge
> > > > theforge mail list group photo site is
> > > > http://www.photoaccess.com
> > > > Login: [email protected]
> > > > password: anvil
> > > > ___________
> > > >
> > > >
> > >
> > > _______________________________________________
> > > http://mailman.qth.net/mailman/listinfo/theforge
> > > theforge mail list group photo site is
> > > http://www.photoaccess.com
> > > Login: [email protected]
> > > password: anvil
> > > ___________
> > >
> > >
> > _______________________________________________
> > http://mailman.qth.net/mailman/listinfo/theforge
> > theforge mail list group photo site is
> > http://www.photoaccess.com
> > Login: [email protected]
> > password: anvil
> > ___________
> >
> >
>
>_______________________________________________
>http://mailman.qth.net/mailman/listinfo/theforge
>theforge mail list group photo site is
>http://www.photoaccess.com
>Login: [email protected]
>password: anvil
>___________