[Test-Equipment] Kikusui Freq. Counter problem

[Robert Nickels]

On 1/20/2020 6:58 PM, Howard Weeks wrote:
>
> If the boards are mounted in sockets, try removing them one at time, 
> wipe the contacts and replacing them. I have a lot of HP and Tektronix 
> test equipment that has seemingly went crazy at times. That has fixed 
> mine every time over the last 10 years or so. 

Howard,  Steve -

Thanks for your suggestions.   I knew this was a single board design but 
figured what the heck, so I removed and re-seated the CPU, EPROM and two 
static RAM ICs which are socketed, and I'll be darned if the counter 
didn't start working properly afterward!

Thanks again,

73,  Bob W9RAN