[Test-Equipment] Need to shift pulse up 5V

[David DiGiacomo]

On Thu, Apr 30, 2015 at 10:37 PM, Barry <n4buq at knology.net> wrote:
> I have a situation where a clock signal is pulsed to 0V from a normally -5V signal level.  I would like to have that same waveform shifted +5V (e.g. the pulse would go from 0V to +5V instead of -5V to 0V).

You can do it easily with a common-base NPN.

Otherwise, an LM311 would work.