[Test-Equipment] Fwd: Re: [TestEquipTrader] --- weekend purge -- ---

[Pete M]

> 1 - Ailtech / Eaton 2075-2a (10Mhz to 1900Mhz), Ailtech / Eaton 7615 
> Noise Source (10Mhz-1.5Ghz, 15dbENR), Input and output cables and 
> adapters ( Megaphase and Suhner ), All tested and working as it 
> should. $910 shipped CONUS.
>
> 2 - HP 9870B (10Mhz to 1600Mhz ), Ailtech / Eaton 7615 Noise Source 
> (10Mhz-1.5Ghz, 15dbENR),, Megaphase input and output cables, all 
> tested and working as it should, $1010 Shipped CONUS
>
> 3 - HP sweeper main frame 8350B. Tested and fully working. This is 
> without a plug in. I have several units with plug ins but this is the 
> extra without. Fully tested and working properly with a known good 
> plug in. $120 + shipping
>
> 4 - HP 8510B set, contains the Display and the IF unit. Tested working 
> with my system ( not included ). $650 + shipping
>
> 5 - HP 8712A Transmission / reflection unit for the 8510 series. 
> 500Mhz to 18Ghz, Tested working properly $500 + Shipping
>
> 6 - HP83592B sweeper plug in , 10Mhz to 20Ghz, has issue of unleveled 
> output, BUT has output, complete and clean, $580 +Shipping
>
> 7 - HP83592B sweeper plug in , 10Mhz to 20Ghz, has issue of unleveled 
> output, BUT has output, complete and clean, $580 +Shipping
>
> 8 - HP83592B sweeper plug in , 10Mhz to 20Ghz, has issue of no output, 
> complete and clean, $480 +Shipping
>
> 9 - HP8757A Scaler Network Analyzer, No issues and no typical CRT 
> problems ...it is bright and sharp, Also included are 2 detectors 
> (HP11664A)01-18Ghz w/ N male connectors, an HP 85021A Directional 
> Bridge 10Mhz to 18Ghz N FM RF in and APC7 Test Port ( included is an 
> APC7 to N FM adapter, a Suhner Power Divider 50ohm to 12.4Ghz ( tested 
> to 18Ghz) SMA FM conn ( will include 3 Suhner SMA M to N FM adapters, 
> an HPIP Cable, RF and AC cables for interconnect and an HP 8350B / 
> 83592B 10Mhz to 20Ghz sweeper plug in. This is a complete working and 
> tested system. Will divide up. $2350 + Shipping ... or trade
>
> 10 - HP 85025A detector .01 - 18Ghz, N Conn, used on 8757 series 
> Scalar Network analyzer ...complete with cable. Tested and working 
> properly $150 + Shipping
>
> 11 - HP 85037A detector .01 - 18Ghz, N Conn, used on 8757D (only) 
> Scalar Network analyzer ...complete with cable. Tested and working 
> properly $125 + Shipping
>
> 12 - HP 11664B detector .01 - 26.5Ghz, APC3.5 Conn, used on 8757 
> series Scalar Network analyzer ...complete with cable. Tested and NOT 
> working properly good for parts $45 + Shipping
>
> 13 - HP 85021A Directional Bridge .01-18Ghz, N conn, for 8757 series 
> Scalar Network Analyzer, complete with cable, Tested and appears to be 
> working properly, $480 + Shipping
>
> 14 - still have many 24" Megaphase orange cables with SMA M on each 
> end. $18 each + shipping ... look them up on google.
>
> 15 - Maury 8780C VNA calibration set. OPEN, SHORT and LOAD SPL 
> connector with APC7 adapter. Good to 26Ghz ...tested all to 20Ghz 
> (highest my VNA goes). In original case. $170 + Shipping
>
> 16 - 8710B VNA 135Mhz to 20Ghz, (8510B, 8514A, 8350B, 83592B, all 
> cables) Tested and working properly. Cals fine, display bright and 
> sharp, one piece with built in s-parameter, I have replaced it with an 
> 8510C,8515A,8350B/83592B system. $6000 + Shipping ( also check epay 
> for the selling prices of these.
>
> 17 - 8720A VNA 135Mhz to 20Ghz, Tested and working properly. Cals 
> fine, display bright and sharp, one piece with built in s-parameter, I 
> have replaced it with an 8510C,8515A,8350B/83592B system.INCLUDES 2 
> NEW MEGAPHASE Test Port ((NMD 3.5) cables to N M ends ( over $500 each 
> ) $5800 + Shipping ( also check epay for the selling prices of 8720's.)
>
> Thanks for looking,
> Pete
>
> __._,_.___