[Test-Equipment] HP-3336B

[Glenn Little WB4UIV]

The WECO connector is used in video patch panels.
There are a number of diameters used.

This could be the correct diameter 300642106490 .

This is another 190436105906 .

The mid-sized are NOT the correct size.

Sorry I hit the send button by accident on the partial response.

Measure the diameter of your connector and ask the seller.

You can also replace the WECO connector with a BNC.

73
Glenn
WB4UIV



At 04:00 PM 12/30/2011, you wrote:
>Hello all,
>
>I've got an HP-3336B on the way.
>
>What are these WECO connectors on the front for output?
>
>Can they be found?
>
>I just want to use this as a "VFO" with 1V output to feed the crystal
>jack on a BC-610 Tuning unit.
>
>I'm going to take an old crystal, gut it, and drill a hole in the top.
>I'll feed the 75 ohm output with a piece of RG-58.  The impedance
>mismatch won't mean diddle.
>
>The cable will only be about 3 to 5 feet in length.
>
>Any ideas or connectors available?
>
>Bob - N0DGN
>______________________________________________________________
>Test-Equipment mailing list
>Home: http://mailman.qth.net/mailman/listinfo/test-equipment
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Test-Equipment at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html