From wlfuqu00 at uky.edu  Mon Mar  1 00:20:58 2010
From: wlfuqu00 at uky.edu (Fuqua, Bill L)
Date: Mon, 1 Mar 2010 00:20:58 -0500
Subject: [Test-Equipment] HP8663A manual
In-Reply-To: <4B8B3EBA.4040307@gmail.com>
References: <5.1.1.5.2.20100225095956.02243cd0@exchange.uky.edu>,
	<4B8B3EBA.4040307@gmail.com>
Message-ID: <60374AAC83C8764A98809A65BED321CB0183F24CD0@EX7FM04.ad.uky.edu>

THANKS.
BILL WA4LAV

________________________________________
From: test-equipment-bounces at mailman.qth.net [test-equipment-bounces at mailman.qth.net] On Behalf Of Mike Manes [mrmanes at gmail.com]
Sent: Sunday, February 28, 2010 11:12 PM
To: test-equipment at mailman.qth.net
Subject: Re: [Test-Equipment] HP8663A manual

Might try artekmedia.com.  They produce excellent scans on CD, and
may have what you need. Disclaimer: I'm just a satisfied customer.
73 de Mike W5VSI

On 2/25/2010 08:04, Bill Fuqua wrote:
>     The Agilent manuals on line have such poor quality schematics that I
> can't even read most of them
> Does anyone have a PDF of at least the schematics of the HP8663A signal
> generator that they can attach to an
> email.
>      I have a  problem below 400 MHz appears that an amplifier is bad or
> something.
> 73
> Bill wa4lav
>
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

--
Mike Manes    mrmanes at gmail.com     Tel: 303-979-4899
"Things should be made as simple as possible, but not more so."
A. Einstein
______________________________________________________________
Test-Equipment mailing list
Home: http://mailman.qth.net/mailman/listinfo/test-equipment
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Test-Equipment at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

From k0ewu9 at juno.com  Mon Mar  1 09:33:44 2010
From: k0ewu9 at juno.com (K0EWU9)
Date: Mon, 1 Mar 2010 08:33:44 -0600
Subject: [Test-Equipment] H_P stuff, of course
Message-ID: <20100301.070705.20190.52957@mailpop10.dca.untd.com>

Good morning group- I need a very simple thing, I think.
____________________________________________________________
Diet Help
Cheap Diet Help Tips. Click here.
http://thirdpartyoffers.juno.com/TGL2141/c?cp=q90HCED_mE90tkRbkUztYgAAJ1AmMEKPTVQY-SXbGjk4roFnAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAAYQAAAAAA=

From k0ewu9 at juno.com  Mon Mar  1 10:36:48 2010
From: k0ewu9 at juno.com (K0EWU9)
Date: Mon, 1 Mar 2010 09:36:48 -0600
Subject: [Test-Equipment] H-P 524D STUFF
Message-ID: <20100301.073743.48.53557@mailpop06.dca.untd.com>

HI again, I started to write an e-mail, hit wrong key, send.  wrong..
I have a need for an item from a 524? plug in, it is a range extender I
think.
Thhere is a vernier knob and shaft on the panel which drives the dial,
this assembly has a set of "pinch washers"
on the knob shaft.
does this ring a bell with any one.  I used to buy the plug in at
hamfests just for the eye tube.
I need the pinch washer things to repair a nice National rx dial drive
tht someone had "fixed"!
I will purchase the complete plug in less the eye tube if need be.
TNX

JACK  (JOHN)  IVERSON     K0EWU9 at juno.com
K0EWU
IEELM  RCA  ARCI  ARRL  1110 N OLD MILL RD
PALATINE IL 60067

____________________________________________________________
Get Free Email with Video Mail & Video Chat!
http://www.juno.com/freeemail?refcd=JUTAGOUT1FREM0210

From n0jmy at hayseedhamfest.com  Mon Mar  1 10:49:09 2010
From: n0jmy at hayseedhamfest.com (=?ISO-8859-1?Q?Tom_N=D8JMY?=)
Date: Mon, 01 Mar 2010 09:49:09 -0600
Subject: [Test-Equipment] H_P stuff, of course
In-Reply-To: <20100301.070705.20190.52957@mailpop10.dca.untd.com>
References: <20100301.070705.20190.52957@mailpop10.dca.untd.com>
Message-ID: <4B8BE1F5.1010403@hayseedhamfest.com>

I kind of like Ultra Slim-Fast.

73,
Tom N?JMY
Hayseed Hamfest Co.  .       .

K0EWU9 wrote:
> Good morning group- I need a very simple thing, I think.
> ____________________________________________________________
> Diet Help
> Cheap Diet Help Tips. Click here.
> http://thirdpartyoffers.juno.com/T

From erastber at tampabay.rr.com  Mon Mar  1 16:25:37 2010
From: erastber at tampabay.rr.com (=?iso-8859-1?B?V9hRRkM=?=)
Date: Mon, 1 Mar 2010 16:25:37 -0500
Subject: [Test-Equipment] H-P 524D STUFF
References: <20100301.073743.48.53557@mailpop06.dca.untd.com>
Message-ID: <203B71BCFEAF432E902E3D00D24D7151@HP>

GA OM

I have a junker HP 525A plug-in and if you tell me EXACTLY what you need, I 
can remove it and send it to you for postage + a few $$ for coffee. . . .

Let me know

Gene, W?QFC
Spring Hill FL 


From k2gtm1 at gmail.com  Wed Mar  3 18:25:06 2010
From: k2gtm1 at gmail.com (Greg Miller, K2GTM)
Date: Wed, 03 Mar 2010 18:25:06 -0500
Subject: [Test-Equipment] FS: Tek and Videotek scope tubes
Message-ID: <4B8EEFD2.1030003@gmail.com>

Hi all,

I have several NOS Tektronix and Videotek scope tubes for sale.  All are 
new in their original factory boxes:

1 - Videotek 128150 - used in TSM-5A waveform monitor (with s/n starting 
with B) (opened box)
1 - Videotek 128135 - used in TSM-5A waveform monitor (earlier s/n ?) 
(opened box)
4 - Tektronix 154-0525-10 - used in 528 waveform monitor (I have 3 
factory sealed and one opened box)
1 - Tektronix 154-0513-00 - used in 520A vectorscope (factory sealed)

The Videoteks have scales on the tube faces, the Teks do not.

If anyone is interested, please contact me off the list.  I am welcome 
to offers!

Thanks,
-Greg




From erastber at tampabay.rr.com  Thu Mar  4 15:05:15 2010
From: erastber at tampabay.rr.com (=?iso-8859-1?B?V9hRRkM=?=)
Date: Thu, 4 Mar 2010 15:05:15 -0500
Subject: [Test-Equipment] Scope help needed!!!!
Message-ID: <838DC1094AB24E58887EF09978796A34@HP>

I have a TEK 7603 w/7A18 & 7B53A and I am having trouble displaying a sine 
wave (60 cps line).

I get adequate vert deflection but can not expand the trace horizontally, I 
just get a vertical line.

Is any one familiar with this scope that could guide me trough the settings?

TIA es 73
Gene, W?QFC
Spring Hill FL 


From jfor at quik.com  Thu Mar  4 15:17:05 2010
From: jfor at quik.com (J. Forster)
Date: Thu, 4 Mar 2010 12:17:05 -0800 (PST)
Subject: [Test-Equipment] Scope help needed!!!!
In-Reply-To: <838DC1094AB24E58887EF09978796A34@HP>
References: <838DC1094AB24E58887EF09978796A34@HP>
Message-ID: <58871.12.6.201.2.1267733825.squirrel@popaccts.quik.com>

Where on the screen is the vertical line? Left? Center? Right?

What are the readouts doing? Are they displaying as lines of text or just
short vertical lines at the top and bottom of the screen?

If the latter, you likely have a mainframe H amp issue.

First step, check the power supply voltages, per the manual.

-John

=================




> I have a TEK 7603 w/7A18 & 7B53A and I am having trouble displaying a sine
> wave (60 cps line).
>
> I get adequate vert deflection but can not expand the trace horizontally,
> I
> just get a vertical line.
>
> Is any one familiar with this scope that could guide me trough the
> settings?
>
> TIA es 73
> Gene, W?QFC
> Spring Hill FL



From erastber at tampabay.rr.com  Thu Mar  4 15:51:49 2010
From: erastber at tampabay.rr.com (=?iso-8859-1?B?V9hRRkM=?=)
Date: Thu, 4 Mar 2010 15:51:49 -0500
Subject: [Test-Equipment] Scope help needed!!!!
References: <838DC1094AB24E58887EF09978796A34@HP>
	<58871.12.6.201.2.1267733825.squirrel@popaccts.quik.com>
Message-ID: <EA29B3C185544EB695EF5FB9FA4136D1@HP>

John:

Thanks for the reply!


Where on the screen is the vertical line? Left? Center? Right?
**I can move it from extreme left to extreme right and up and down.

What are the readouts doing? Are they displaying as lines of text or just
short vertical lines at the top and bottom of the screen?
**Readouts are ok.
**The problem seems to be that I can not "expand" the vertical line 
horizontally; Like on a TV when you have a straight horizontal line, there 
is no vertical deflection. I think my scope has no horizontal deflection. . 
. .

If the latter, you likely have a mainframe H amp issue.

First step, check the power supply voltages, per the manual.

-John

=================




> I have a TEK 7603 w/7A18 & 7B53A and I am having trouble displaying a sine
> wave (60 cps line).
>
> I get adequate vert deflection but can not expand the trace horizontally,
> I
> just get a vertical line.
>
> Is any one familiar with this scope that could guide me trough the
> settings?
>
> TIA es 73
> Gene, W?QFC
> Spring Hill FL


______________________________________________________________
Test-Equipment mailing list
Home: http://mailman.qth.net/mailman/listinfo/test-equipment
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Test-Equipment at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html 


From jfor at quik.com  Thu Mar  4 15:54:14 2010
From: jfor at quik.com (J. Forster)
Date: Thu, 4 Mar 2010 12:54:14 -0800 (PST)
Subject: [Test-Equipment] Scope help needed!!!!
In-Reply-To: <EA29B3C185544EB695EF5FB9FA4136D1@HP>
References: <838DC1094AB24E58887EF09978796A34@HP>
	<58871.12.6.201.2.1267733825.squirrel@popaccts.quik.com>
	<EA29B3C185544EB695EF5FB9FA4136D1@HP>
Message-ID: <59376.12.6.201.2.1267736054.squirrel@popaccts.quik.com>

> John:
>
> Thanks for the reply!
>
>
> Where on the screen is the vertical line? Left? Center? Right?
> **I can move it from extreme left to extreme right and up and down.
>
> What are the readouts doing? Are they displaying as lines of text or just
> short vertical lines at the top and bottom of the screen?
> **Readouts are ok.

The mainframe is likely OK then.

> **The problem seems to be that I can not "expand" the vertical line
> horizontally; Like on a TV when you have a straight horizontal line, there
> is no vertical deflection. I think my scope has no horizontal deflection.

=====

More likely, the sweep is not triggered. Is there a green "Triggered" LED
on the panel? Is that on?

Are you in AUTO sweep mode? Check you are not in "Single Sweep" or a
"Delayed" mode.

Another thing you can do is put your 7A18 into the H slot and see if you
can get H deflection with that.

-John

===========


From erastber at tampabay.rr.com  Thu Mar  4 16:10:30 2010
From: erastber at tampabay.rr.com (=?iso-8859-1?B?V9hRRkM=?=)
Date: Thu, 4 Mar 2010 16:10:30 -0500
Subject: [Test-Equipment] Scope help needed!!!!
References: <838DC1094AB24E58887EF09978796A34@HP><58871.12.6.201.2.1267733825.squirrel@popaccts.quik.com><EA29B3C185544EB695EF5FB9FA4136D1@HP>
	<59376.12.6.201.2.1267736054.squirrel@popaccts.quik.com>
Message-ID: <27BCF3EFA7C7495D90D5FC45ABE868B0@HP>

John:
More likely, the sweep is not triggered. Is there a green "Triggered" LED
on the panel? Is that on?
** YES

Are you in AUTO sweep mode? Check you are not in "Single Sweep" or a
"Delayed" mode.
** Yes, in auto

Another thing you can do is put your 7A18 into the H slot and see if you
can get H deflection with that.
**  Yes, I now get horizontal deflection.

Gene
===========





From jfor at quik.com  Thu Mar  4 16:11:44 2010
From: jfor at quik.com (J. Forster)
Date: Thu, 4 Mar 2010 13:11:44 -0800 (PST)
Subject: [Test-Equipment] Scope help needed!!!!
In-Reply-To: <27BCF3EFA7C7495D90D5FC45ABE868B0@HP>
References: <838DC1094AB24E58887EF09978796A34@HP><58871.12.6.201.2.1267733825.squirrel@popaccts.quik.com><EA29B3C185544EB695EF5FB9FA4136D1@HP>
	<59376.12.6.201.2.1267736054.squirrel@popaccts.quik.com>
	<27BCF3EFA7C7495D90D5FC45ABE868B0@HP>
Message-ID: <58284.12.6.201.2.1267737104.squirrel@popaccts.quik.com>

OK, you have a problem with your 7B53a.

D/L the manual and follow the troubleshooting pages. BUT still check that
the PS voltages are OK before you waste a lot of time.

You also might try rotating the Time/Div (and other) switchs from stop to
stop a dozen or so times. The cam switch may be dirty.

-John

=================


> John:
> More likely, the sweep is not triggered. Is there a green "Triggered" LED
> on the panel? Is that on?
> ** YES
>
> Are you in AUTO sweep mode? Check you are not in "Single Sweep" or a
> "Delayed" mode.
> ** Yes, in auto
>
> Another thing you can do is put your 7A18 into the H slot and see if you
> can get H deflection with that.
> **  Yes, I now get horizontal deflection.
>
> Gene
> ===========
>
>
>
>
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>



From cmos at shol.com  Thu Mar  4 20:28:49 2010
From: cmos at shol.com (cmos at shol.com)
Date: Thu, 4 Mar 2010 20:28:49 -0500
Subject: [Test-Equipment] UPS damage to test equipment.
Message-ID: <2f911a46e53d4f558c4a134d55c862ad.cmos@shol.com>

All,

I had an HP 141T spectrum analyzer sent to me
via UPS. Well, it arrived with the back dented
in by the back of the crt. The crt socket cover
was broken off and you guessed it, the crt was
broken.

There was several inches of packaging material
between the box and the unit. the box was riped
were the impact accrued. It is obvious that this
was rammed or was dropped from a hight onto 
something, after all this is a 70+ pound item. 

But UPS is refusing the damage claim, and saying
that it had "insufficient packaging".
Doing a web search to figure out what to do only
resulted in finding out they seem to tell
everyone that. When I try to ask them about it
they pass the buck to the ups store that it was
sent form. When I talk to the ups store, they say
that ups told them the same and that ups has also
denied there appeal. 

Has any one had any experience with ups denying 
a claim? And what did you do about it?

Also, any one have a used HP 141T CRT for sell?

Thanks,
Jim      
 

  


From radiotest at plymouthcolony.net  Thu Mar  4 20:50:22 2010
From: radiotest at plymouthcolony.net (Dale H. Cook)
Date: Thu, 04 Mar 2010 20:50:22 -0500
Subject: [Test-Equipment] UPS damage to test equipment.
In-Reply-To: <2f911a46e53d4f558c4a134d55c862ad.cmos@shol.com>
References: <2f911a46e53d4f558c4a134d55c862ad.cmos@shol.com>
Message-ID: <7.0.1.0.2.20100304204857.02817578@plymouthcolony.net>

At 08:28 PM 3/4/2010, Jim wrote:

>And what did you do about it?

I don't use UPS anymore, because they have damaged too many shipments.

Dale H. Cook, Contract Engineer, Roanoke/Lynchburg, VA
http://plymouthcolony.net/starcityeng/index.html 


From tfrobase at gmail.com  Thu Mar  4 20:58:29 2010
From: tfrobase at gmail.com (Tom Frobase)
Date: Thu, 04 Mar 2010 19:58:29 -0600
Subject: [Test-Equipment] UPS damage to test equipment.
In-Reply-To: <7.0.1.0.2.20100304204857.02817578@plymouthcolony.net>
References: <2f911a46e53d4f558c4a134d55c862ad.cmos@shol.com>
	<7.0.1.0.2.20100304204857.02817578@plymouthcolony.net>
Message-ID: <4B906545.2040808@gmail.com>

Hope you don't use FEDEX !!  Here is an 51J4 delivered to my front door!

http://www.kitparts.com/ebay/damage/IMG_0116.JPG  73, tom, N3LLL


Dale H. Cook wrote:
> At 08:28 PM 3/4/2010, Jim wrote:
>
>   
>> And what did you do about it?
>>     
>
> I don't use UPS anymore, because they have damaged too many shipments.
>
> Dale H. Cook, Contract Engineer, Roanoke/Lynchburg, VA
> http://plymouthcolony.net/starcityeng/index.html 
>
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>   


From etgreeley at earthlink.net  Thu Mar  4 21:22:09 2010
From: etgreeley at earthlink.net (Edward Greeley)
Date: Thu, 04 Mar 2010 20:22:09 -0600
Subject: [Test-Equipment] UPS damage to test equipment.
In-Reply-To: <2f911a46e53d4f558c4a134d55c862ad.cmos@shol.com>
References: <2f911a46e53d4f558c4a134d55c862ad.cmos@shol.com>
Message-ID: <4B906AD1.8080209@earthlink.net>

I had a number of such occurrences, both incoming and outgoing. You, 
sir, are essentially S.O.L. because you can't fight their bureaucracy. 
They will pass the buck until you find yourself going around in circles.

Next time use FedEx; cheaper, faster, and (as a rule) MUCH safer.


cmos at shol.com wrote:
> 
> Has any one had any experience with ups denying 
> a claim? And what did you do about it?
> 


From kk7iz at cox.net  Thu Mar  4 21:40:17 2010
From: kk7iz at cox.net (Lloyd Godsey)
Date: Thu, 4 Mar 2010 19:40:17 -0700
Subject: [Test-Equipment] UPS damage to test equipment.
In-Reply-To: <4B906545.2040808@gmail.com>
References: <2f911a46e53d4f558c4a134d55c862ad.cmos@shol.com><7.0.1.0.2.20100304204857.02817578@plymouthcolony.net>
	<4B906545.2040808@gmail.com>
Message-ID: <FE7032BA1F1B46F8B6A0338449E0D47D@LloydPC>

That mess was the fault of the idiot that packed it

--------------------------------------------------
From: "Tom Frobase" <tfrobase at gmail.com>
Sent: Thursday, March 04, 2010 6:58 PM
To: "Discussion of Electronic Test Equipment" 
<test-equipment at mailman.qth.net>
Subject: Re: [Test-Equipment] UPS damage to test equipment.

> Hope you don't use FEDEX !!  Here is an 51J4 delivered to my front door!
>
> http://www.kitparts.com/ebay/damage/IMG_0116.JPG  73, tom, N3LLL
>
>
> Dale H. Cook wrote:
>> At 08:28 PM 3/4/2010, Jim wrote:
>>
>>
>>> And what did you do about it?
>>>
>>
>> I don't use UPS anymore, because they have damaged too many shipments.
>>
>> Dale H. Cook, Contract Engineer, Roanoke/Lynchburg, VA
>> http://plymouthcolony.net/starcityeng/index.html
>>
>> ______________________________________________________________
>> Test-Equipment mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Test-Equipment at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 

From km1h at jeremy.mv.com  Thu Mar  4 21:46:53 2010
From: km1h at jeremy.mv.com (Carl)
Date: Thu, 4 Mar 2010 21:46:53 -0500
Subject: [Test-Equipment] UPS damage to test equipment.
References: <2f911a46e53d4f558c4a134d55c862ad.cmos@shol.com>
	<4B906AD1.8080209@earthlink.net>
Message-ID: <01eb01cabc0e$1f2c2030$6501a8c0@DAVES>

I much prefer UPS to FedWrex.

With UPS it is easy to get a claim approved if the item is packed according 
to their on line "guidelines" which are gospel.

Also anyone should realize that a 141T system is not supposed to be shipped 
with the plug-ins. Heck, it even says that in the HP manual.

Carl



----- Original Message ----- 
From: "Edward Greeley" <etgreeley at earthlink.net>
To: "Discussion of Electronic Test Equipment" 
<test-equipment at mailman.qth.net>
Sent: Thursday, March 04, 2010 9:22 PM
Subject: Re: [Test-Equipment] UPS damage to test equipment.


>I had a number of such occurrences, both incoming and outgoing. You,
> sir, are essentially S.O.L. because you can't fight their bureaucracy.
> They will pass the buck until you find yourself going around in circles.
>
> Next time use FedEx; cheaper, faster, and (as a rule) MUCH safer.
>
>
> cmos at shol.com wrote:
>>
>> Has any one had any experience with ups denying
>> a claim? And what did you do about it?
>>
>
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 


From n4buq at knology.net  Thu Mar  4 22:04:42 2010
From: n4buq at knology.net (Barry)
Date: Thu, 4 Mar 2010 21:04:42 -0600
Subject: [Test-Equipment] UPS damage to test equipment.
References: <2f911a46e53d4f558c4a134d55c862ad.cmos@shol.com>
Message-ID: <001401cabc10$9a984710$6501a8c0@ingrnet.com>

It must be the phase of the moon or something.  I usually have very good 
luck with UPS but today I received an HP8654a/8655a combination and the box 
looked like it had been dropped or run over.  For some reason, they 
"rescheduled" the shipment from the start and it makes me wonder just what 
that was all about now.

Fortunately, the shipper packed it well with many layers of bubble wrap and 
it survived though I was expecting much, much worse when I saw the box.  I 
think it's the only time I took "before" pictures of the box before I opened 
it just in case.

It should have been packed "firmer", though, as the bubble-wrapped insides 
still could roll around a bit in the box (and it was just a single-boxed 
arrangement).  It's best to not allow the insides any "rolling" space.

Barry - N4BUQ

----- Original Message ----- 
From: <cmos at shol.com>
To: <test-equipment at mailman.qth.net>
Sent: Thursday, March 04, 2010 7:28 PM
Subject: [Test-Equipment] UPS damage to test equipment.


> All,
>
> I had an HP 141T spectrum analyzer sent to me
> via UPS. Well, it arrived with the back dented
> in by the back of the crt. The crt socket cover
> was broken off and you guessed it, the crt was
> broken.
>
> There was several inches of packaging material
> between the box and the unit. the box was riped
> were the impact accrued. It is obvious that this
> was rammed or was dropped from a hight onto
> something, after all this is a 70+ pound item.
>
> But UPS is refusing the damage claim, and saying
> that it had "insufficient packaging".
> Doing a web search to figure out what to do only
> resulted in finding out they seem to tell
> everyone that. When I try to ask them about it
> they pass the buck to the ups store that it was
> sent form. When I talk to the ups store, they say
> that ups told them the same and that ups has also
> denied there appeal.
>
> Has any one had any experience with ups denying
> a claim? And what did you do about it?
>
> Also, any one have a used HP 141T CRT for sell?
>
> Thanks,
> Jim


From nx7u at cox.net  Thu Mar  4 22:07:12 2010
From: nx7u at cox.net (Scott Townley)
Date: Thu, 04 Mar 2010 20:07:12 -0700
Subject: [Test-Equipment] UPS damage to test equipment.
In-Reply-To: <2f911a46e53d4f558c4a134d55c862ad.cmos@shol.com>
References: <2f911a46e53d4f558c4a134d55c862ad.cmos@shol.com>
Message-ID: <6.2.1.2.2.20100304200436.027e95e8@pop.west.cox.net>

In my experience the only way to ship TE or other electronics via UPS is to 
go to their collection center (NOT to franchised "UPS Stores" or office 
supply centers etc.) and have UPS pack it themselves.  They (at least at 
one time) offered "foam-in-place" packaging, where UPS forms a clamshell of 
expanded foam on top & bottom of the item and then double-boxes it.  Not 
only is it very robust packaging, but since they packaged it, they cannot 
realistically deny any damage claims.
Foam-in-place *isn't* cheap...probably on the order of $50-60 for an item 
like a 141, and then shipping on top of that.

Or...don't use UPS.  IMHO they suck.

At 18:28 2010-03-04, you wrote:
>All,
>
>I had an HP 141T spectrum analyzer sent to me
>via UPS. Well, it arrived with the back dented
>in by the back of the crt. The crt socket cover
>was broken off and you guessed it, the crt was
>broken.
>
>There was several inches of packaging material
>between the box and the unit. the box was riped
>were the impact accrued. It is obvious that this
>was rammed or was dropped from a hight onto
>something, after all this is a 70+ pound item.
>
>But UPS is refusing the damage claim, and saying
>that it had "insufficient packaging".
>Doing a web search to figure out what to do only
>resulted in finding out they seem to tell
>everyone that. When I try to ask them about it
>they pass the buck to the ups store that it was
>sent form. When I talk to the ups store, they say
>that ups told them the same and that ups has also
>denied there appeal.
>
>Has any one had any experience with ups denying
>a claim? And what did you do about it?
>
>Also, any one have a used HP 141T CRT for sell?
>
>Thanks,
>Jim
>
>
>
>
>______________________________________________________________
>Test-Equipment mailing list
>Home: http://mailman.qth.net/mailman/listinfo/test-equipment
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Test-Equipment at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html

Scott Townley NX7U
Gilbert, AZ  DM43di
mailto:nx7u at cox.net
http://members.cox.net/nx7u 


From k0ewu9 at juno.com  Fri Mar  5 10:22:11 2010
From: k0ewu9 at juno.com (K0EWU9)
Date: Fri, 5 Mar 2010 09:22:11 -0600
Subject: [Test-Equipment] 141T CRT.
Message-ID: <20100305.072223.1057.47914@mailpop11.dca.untd.com>

 I have a good crtfor the unit, 45.00lus shipping, this crt must be
shipped flat so packing will be unique!
Jack

On Thu, 4 Mar 2010 20:28:49 -0500 "cmos at shol.com" <cmos at shol.com> writes:
> All,
> 
> I had an HP 141T spectrum analyzer sent to me
> via UPS. Well, it arrived with the back dented
> in by the back of the crt. The crt socket cover
> was broken off and you guessed it, the crt was
> broken.
> 
> There was several inches of packaging material
> between the box and the unit. the box was riped
> were the impact accrued. It is obvious that this
> was rammed or was dropped from a hight onto 
> something, after all this is a 70+ pound item. 
> 
> But UPS is refusing the damage claim, and saying
> that it had "insufficient packaging".
> Doing a web search to figure out what to do only
> resulted in finding out they seem to tell
> everyone that. When I try to ask them about it
> they pass the buck to the ups store that it was
> sent form. When I talk to the ups store, they say
> that ups told them the same and that ups has also
> denied there appeal. 
> 
> Has any one had any experience with ups denying 
> a claim? And what did you do about it?
> 
> Also, any one have a used HP 141T CRT for sell?
> 
> Thanks,
> Jim      
>  
> 
>   
> 
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
 
____________________________________________________________
Diet Help
Cheap Diet Help Tips. Click here.
http://thirdpartyoffers.juno.com/TGL2141/c?cp=wjwLfIIAnOAqdy-Un-ArsQAAJ1AmMEKPTVQY-SXbGjk4roFnAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAAYQAAAAAA=

From brooke at pacific.net  Fri Mar  5 10:54:36 2010
From: brooke at pacific.net (Brooke Clarke)
Date: Fri, 05 Mar 2010 07:54:36 -0800
Subject: [Test-Equipment] UPS damage to test equipment.
In-Reply-To: <2f911a46e53d4f558c4a134d55c862ad.cmos@shol.com>
References: <2f911a46e53d4f558c4a134d55c862ad.cmos@shol.com>
Message-ID: <4B91293C.9000309@pacific.net>

Hi Jim:

 From what you've said it's hard to tell if it was the fault of UPS, but 
my guess is that the problem was poor packaging.
I've received many rack mount sized items via UPS and other carriers 
without damage (and some that were damaged).  The key is proper 
packaging.  To see many examples of things that I've received with good 
and poor packaging see:  http://prc68.com/I/Pack.shtml

Have Fun,

Brooke Clarke
http://www.PRC68.com


cmos at shol.com wrote:
> All,
>
> I had an HP 141T spectrum analyzer sent to me
> via UPS. Well, it arrived with the back dented
> in by the back of the crt. The crt socket cover
> was broken off and you guessed it, the crt was
> broken.
>
> There was several inches of packaging material
> between the box and the unit. the box was riped
> were the impact accrued. It is obvious that this
> was rammed or was dropped from a hight onto
> something, after all this is a 70+ pound item.
>
> But UPS is refusing the damage claim, and saying
> that it had "insufficient packaging".
> Doing a web search to figure out what to do only
> resulted in finding out they seem to tell
> everyone that. When I try to ask them about it
> they pass the buck to the ups store that it was
> sent form. When I talk to the ups store, they say
> that ups told them the same and that ups has also
> denied there appeal.
>
> Has any one had any experience with ups denying
> a claim? And what did you do about it?
>
> Also, any one have a used HP 141T CRT for sell?
>
> Thanks,
> Jim
>
>
>
>
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>    


From cmos at shol.com  Fri Mar  5 12:06:21 2010
From: cmos at shol.com (cmos at shol.com)
Date: Fri, 5 Mar 2010 12:06:21 -0500
Subject: [Test-Equipment] 141T CRT.
Message-ID: <0d58a389d0af4079bd04fff78f52aff8.cmos@shol.com>

Jack,

I am definitely interested in this crt for the 141T.
How much would the s+h to 15552 be?
Make sure it will be packaged very well.
Also, do you have a ups store near you?
If so, some have an unconditional protection,
that if they pack it and it is damaged that 
they will cover the damage no questions ask.
I forget the name of that program off hand.

Anyway, let me know what S+H is.
And do you except Paypal?
If so, what is the Paypal name/email?

Thanks,
Jim 



------- Original Message -------
>From    : K0EWU9[mailto:k0ewu9 at juno.com]
Sent    : 3/5/2010 10:22:11 AM
To      : test-equipment at mailman.qth.net
Cc      : 
Subject : RE: [Test-Equipment] 141T CRT.

  I have a good crtfor the unit, 45.00lus shipping,
this crt must be
shipped flat so packing will be unique!
Jack

On Thu, 4 Mar 2010 20:28:49 -0500 "cmos at shol.com"
<cmos at shol.com> writes:
> All,
> 
> I had an HP 141T spectrum analyzer sent to me
> via UPS. Well, it arrived with the back dented
> in by the back of the crt. The crt socket cover
> was broken off and you guessed it, the crt was
> broken.
> 
> There was several inches of packaging material
> between the box and the unit. the box was riped
> were the impact accrued. It is obvious that this
> was rammed or was dropped from a hight onto 
> something, after all this is a 70+ pound item. 
> 
> But UPS is refusing the damage claim, and saying
> that it had "insufficient packaging".
> Doing a web search to figure out what to do only
> resulted in finding out they seem to tell
> everyone that. When I try to ask them about it
> they pass the buck to the ups store that it was
> sent form. When I talk to the ups store, they say
> that ups told them the same and that ups has also
> denied there appeal. 
> 
> Has any one had any experience with ups denying 
> a claim? And what did you do about it?
> 
> Also, any one have a used HP 141T CRT for sell?
> 
> Thanks,
> Jim      
>  
> 
>   
> 
>
______________________________________________________________
> Test-Equipment mailing list
> Home: 
http://mailman.qth.net/mailman/listinfo/test-equipment 
> Help:  http://mailman.qth.net/mmfaq.htm 
> Post:  mailto:Test-Equipment at mailman.qth.net 
> 
> This list hosted by:  http://www.qsl.net 
> Please help support this email list: 
http://www.qsl.net/donate.html 
> 
 
____________________________________________________________
Diet Help
Cheap Diet Help Tips. Click here.
 http://thirdpartyoffers.juno.com/TGL2141/c?cp=wjwLfIIAnOAqdy-Un-ArsQAAJ1AmMEKPTVQY-SXbGjk4roFnAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAAYQAAAAAA= 
______________________________________________________________
Test-Equipment mailing list
Home: 
http://mailman.qth.net/mailman/listinfo/test-equipment 
Help:  http://mailman.qth.net/mmfaq.htm 
Post:  mailto:Test-Equipment at mailman.qth.net 

This list hosted by:  http://www.qsl.net 
Please help support this email list: 
http://www.qsl.net/donate.html 


From wolfbob at csnsys.com  Fri Mar  5 12:34:23 2010
From: wolfbob at csnsys.com (wolfbob)
Date: Fri, 5 Mar 2010 09:34:23 -0800
Subject: [Test-Equipment]  UPS damage to test equipment
References: <mailman.81.1267808430.13663.test-equipment@mailman.qth.net>
Message-ID: <128E637D386F4AD8B22D9793E15706E6@user3ba896898f>

I have shipped/received several thousand heavy packages with UPS over the 
last 15 years. In general it works good but on occasion they will destroy 
something. I always file a claim and they ALWAYS deny it saying the item was 
not packed properly. This is the opening position. Now you fight. Submit all 
the data you can muster. Photos, email from the seller, buyer, packer and 
most anyone else that has seen the damage. They have ALWAYS paid, but it 
takes a barrage of evidence and I really think the bother factor is more 
significant than the facts.

They usually want the item/packing sent to them (They will send you a label 
and pick the unit up) and if you request, you can often get the damaged item 
back plus the full insured value payment. The argument is that YOUR item is 
worth more than the damage/insurance.

Only the sender can file the claim as they are the one with the contract 
with UPS. So make an arrangement with the sender to assure that you get the 
payment and the item back. Don't give up you; will win.

WBob


> ----- Original Message ----- 
> From: <cmos at shol.com>
> To: <test-equipment at mailman.qth.net>
> Sent: Thursday, March 04, 2010 7:28 PM
> Subject: [Test-Equipment] UPS damage to test equipment.
>
>
>> All,
>>
>> I had an HP 141T spectrum analyzer sent to me
>> via UPS. Well, it arrived with the back dented
>> in by the back of the crt. The crt socket cover
>> was broken off and you guessed it, the crt was
>> broken.
>>
>> There was several inches of packaging material
>> between the box and the unit. the box was riped
>> were the impact accrued. It is obvious that this
>> was rammed or was dropped from a hight onto
>> something, after all this is a 70+ pound item.
>>
>> But UPS is refusing the damage claim, and saying
>> that it had "insufficient packaging".
>> Doing a web search to figure out what to do only
>> resulted in finding out they seem to tell
>> everyone that. When I try to ask them about it
>> they pass the buck to the ups store that it was
>> sent form. When I talk to the ups store, they say
>> that ups told them the same and that ups has also
>> denied there appeal.
>>
>> Has any one had any experience with ups denying
>> a claim? And what did you do about it?
>>
>> Also, any one have a used HP 141T CRT for sell?
>>
>> Thanks,
>> Jim
>
>
>


From km1h at jeremy.mv.com  Fri Mar  5 12:56:39 2010
From: km1h at jeremy.mv.com (Carl)
Date: Fri, 5 Mar 2010 12:56:39 -0500
Subject: [Test-Equipment] UPS damage to test equipment
References: <mailman.81.1267808430.13663.test-equipment@mailman.qth.net>
	<128E637D386F4AD8B22D9793E15706E6@user3ba896898f>
Message-ID: <014a01cabc8d$3681d750$6501a8c0@DAVES>

NEVER, EVER let UPS pick up the package.

I demand an on site inspection which often results in them settling for a 
full set of photos.

If they want the item back AFTER the claim is paid that is OK but I usually 
try for "salvage rights" by claiming a little under the insurance. It always 
pays to put a high insurance on the label.

On poorly packed items I dont even bother with a claim and often refuse 
delivery when its obviously a lost cause.

I have daily UPS pickup and my volume is almost all heavy items in the 
40-130# range. UPS hasnt damaged more than 3-4 items that I have packed in 
about 15 years.

Carl






>I have shipped/received several thousand heavy packages with UPS over the
> last 15 years. In general it works good but on occasion they will destroy
> something. I always file a claim and they ALWAYS deny it saying the item 
> was
> not packed properly. This is the opening position. Now you fight. Submit 
> all
> the data you can muster. Photos, email from the seller, buyer, packer and
> most anyone else that has seen the damage. They have ALWAYS paid, but it
> takes a barrage of evidence and I really think the bother factor is more
> significant than the facts.
>
> They usually want the item/packing sent to them (They will send you a 
> label
> and pick the unit up) and if you request, you can often get the damaged 
> item
> back plus the full insured value payment. The argument is that YOUR item 
> is
> worth more than the damage/insurance.
>
> Only the sender can file the claim as they are the one with the contract
> with UPS. So make an arrangement with the sender to assure that you get 
> the
> payment and the item back. Don't give up you; will win.
>
> WBob
>
>
>> ----- Original Message ----- 
>> From: <cmos at shol.com>
>> To: <test-equipment at mailman.qth.net>
>> Sent: Thursday, March 04, 2010 7:28 PM
>> Subject: [Test-Equipment] UPS damage to test equipment.
>>
>>
>>> All,
>>>
>>> I had an HP 141T spectrum analyzer sent to me
>>> via UPS. Well, it arrived with the back dented
>>> in by the back of the crt. The crt socket cover
>>> was broken off and you guessed it, the crt was
>>> broken.
>>>
>>> There was several inches of packaging material
>>> between the box and the unit. the box was riped
>>> were the impact accrued. It is obvious that this
>>> was rammed or was dropped from a hight onto
>>> something, after all this is a 70+ pound item.
>>>
>>> But UPS is refusing the damage claim, and saying
>>> that it had "insufficient packaging".
>>> Doing a web search to figure out what to do only
>>> resulted in finding out they seem to tell
>>> everyone that. When I try to ask them about it
>>> they pass the buck to the ups store that it was
>>> sent form. When I talk to the ups store, they say
>>> that ups told them the same and that ups has also
>>> denied there appeal.
>>>
>>> Has any one had any experience with ups denying
>>> a claim? And what did you do about it?
>>>
>>> Also, any one have a used HP 141T CRT for sell?
>>>
>>> Thanks,
>>> Jim
>>
>>
>>
>
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 


From bluebirdtele at embarqmail.com  Fri Mar  5 13:00:14 2010
From: bluebirdtele at embarqmail.com (Greg Mijal)
Date: Fri, 5 Mar 2010 13:00:14 -0500
Subject: [Test-Equipment] UPS damage to test equipment
In-Reply-To: <128E637D386F4AD8B22D9793E15706E6@user3ba896898f>
References: <mailman.81.1267808430.13663.test-equipment@mailman.qth.net>
	<128E637D386F4AD8B22D9793E15706E6@user3ba896898f>
Message-ID: <F9BE3674F66B4A3BB77F923F7D68B404@GregMijalPC>

Here's a good UPS story:

Sold a 100 lb receiver to a guy in Texas.  He claimed damage and was paid 
in full by UPS.  Radio came back to me with only a slightly bowed front 
panel.
Sold the radio again to another guy that was local.
When all the dust settled I had $850 new dollars in the old booger locker. 
More than twice my expectation when I put it up for sale.
Sometimes you really have to get nasty with UPS to wake them up.  If the 
make even the slightest error you have to call them on it.  It's almost have 
to shame them before they do the right thing.
73's
Greg
WA7LYO
Kinston NC
----- Original Message ----- 
From: "wolfbob" <wolfbob at csnsys.com>
To: <test-equipment at mailman.qth.net>
Sent: Friday, March 05, 2010 12:34 PM
Subject: [Test-Equipment] UPS damage to test equipment


>I have shipped/received several thousand heavy packages with UPS over the
> last 15 years. In general it works good but on occasion they will destroy
> something. I always file a claim and they ALWAYS deny it saying the item 
> was
> not packed properly. This is the opening position. Now you fight. Submit 
> all
> the data you can muster. Photos, email from the seller, buyer, packer and
> most anyone else that has seen the damage. They have ALWAYS paid, but it
> takes a barrage of evidence and I really think the bother factor is more
> significant than the facts.
>
> They usually want the item/packing sent to them (They will send you a 
> label
> and pick the unit up) and if you request, you can often get the damaged 
> item
> back plus the full insured value payment. The argument is that YOUR item 
> is
> worth more than the damage/insurance.
>
> Only the sender can file the claim as they are the one with the contract
> with UPS. So make an arrangement with the sender to assure that you get 
> the
> payment and the item back. Don't give up you; will win.
>
> WBob
>
>
>> ----- Original Message ----- 
>> From: <cmos at shol.com>
>> To: <test-equipment at mailman.qth.net>
>> Sent: Thursday, March 04, 2010 7:28 PM
>> Subject: [Test-Equipment] UPS damage to test equipment.
>>
>>
>>> All,
>>>
>>> I had an HP 141T spectrum analyzer sent to me
>>> via UPS. Well, it arrived with the back dented
>>> in by the back of the crt. The crt socket cover
>>> was broken off and you guessed it, the crt was
>>> broken.
>>>
>>> There was several inches of packaging material
>>> between the box and the unit. the box was riped
>>> were the impact accrued. It is obvious that this
>>> was rammed or was dropped from a hight onto
>>> something, after all this is a 70+ pound item.
>>>
>>> But UPS is refusing the damage claim, and saying
>>> that it had "insufficient packaging".
>>> Doing a web search to figure out what to do only
>>> resulted in finding out they seem to tell
>>> everyone that. When I try to ask them about it
>>> they pass the buck to the ups store that it was
>>> sent form. When I talk to the ups store, they say
>>> that ups told them the same and that ups has also
>>> denied there appeal.
>>>
>>> Has any one had any experience with ups denying
>>> a claim? And what did you do about it?
>>>
>>> Also, any one have a used HP 141T CRT for sell?
>>>
>>> Thanks,
>>> Jim
>>
>>
>>
>
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 


From wolfbob at csnsys.com  Sat Mar  6 12:54:23 2010
From: wolfbob at csnsys.com (wolfbob)
Date: Sat, 6 Mar 2010 09:54:23 -0800
Subject: [Test-Equipment] UPS damage to test equipment
Message-ID: <66F000FABC1644C78B6C18706164DD6F@user3ba896898f>

I agree, Carl. I had forgortten those packages they took for evaluation and could never find again.

WBob
----------------------

I demand an on site inspection which often results in them settling for a 
full set of photos.

If they want the item back AFTER the claim is paid that is OK but I usually 
try for "salvage rights" by claiming a little under the insurance. It always 
pays to put a high insurance on the label.

On poorly packed items I dont even bother with a claim and often refuse 
delivery when its obviously a lost cause.

I have daily UPS pickup and my volume is almost all heavy items in the 
40-130# range. UPS hasnt damaged more than 3-4 items that I have packed in 
about 15 years.

Carl


From k0ewu9 at juno.com  Sat Mar  6 17:56:40 2010
From: k0ewu9 at juno.com (K0EWU9)
Date: Sat, 6 Mar 2010 16:56:40 -0600
Subject: [Test-Equipment] 141T CRT.
Message-ID: <20100306.145720.979.48946@mailpop08.dca.untd.com>

 I am very sorry to say that the tube has gone to air, It has  been
stored in my attic for a few years and I took it ot of the  box to put it
in aa 141 mainframe to
test it. It looks cloudy -----------so no go.
jack
On Fri, 5 Mar 2010 12:06:21 -0500 "cmos at shol.com" <cmos at shol.com> writes:
> Jack,
> 
> I am definitely interested in this crt for the 141T.
> How much would the s+h to 15552 be?
> Make sure it will be packaged very well.
> Also, do you have a ups store near you?
> If so, some have an unconditional protection,
> that if they pack it and it is damaged that 
> they will cover the damage no questions ask.
> I forget the name of that program off hand.
> 
> Anyway, let me know what S+H is.
> And do you except Paypal?
> If so, what is the Paypal name/email?
> 
> Thanks,
> Jim 
> 
> 
> 
> ------- Original Message -------
> >From    : K0EWU9[mailto:k0ewu9 at juno.com]
> Sent    : 3/5/2010 10:22:11 AM
> To      : test-equipment at mailman.qth.net
> Cc      : 
> Subject : RE: [Test-Equipment] 141T CRT.
> 
>   I have a good crtfor the unit, 45.00lus shipping,
> this crt must be
> shipped flat so packing will be unique!
> Jack
> 
> On Thu, 4 Mar 2010 20:28:49 -0500 "cmos at shol.com"
> <cmos at shol.com> writes:
> > All,
> > 
> > I had an HP 141T spectrum analyzer sent to me
> > via UPS. Well, it arrived with the back dented
> > in by the back of the crt. The crt socket cover
> > was broken off and you guessed it, the crt was
> > broken.
> > 
> > There was several inches of packaging material
> > between the box and the unit. the box was riped
> > were the impact accrued. It is obvious that this
> > was rammed or was dropped from a hight onto 
> > something, after all this is a 70+ pound item. 
> > 
> > But UPS is refusing the damage claim, and saying
> > that it had "insufficient packaging".
> > Doing a web search to figure out what to do only
> > resulted in finding out they seem to tell
> > everyone that. When I try to ask them about it
> > they pass the buck to the ups store that it was
> > sent form. When I talk to the ups store, they say
> > that ups told them the same and that ups has also
> > denied there appeal. 
> > 
> > Has any one had any experience with ups denying 
> > a claim? And what did you do about it?
> > 
> > Also, any one have a used HP 141T CRT for sell?
> > 
> > Thanks,
> > Jim      
> >  
> > 
> >   
> > 
> >
> ______________________________________________________________
> > Test-Equipment mailing list
> > Home: 
> http://mailman.qth.net/mailman/listinfo/test-equipment 
> > Help:  http://mailman.qth.net/mmfaq.htm 
> > Post:  mailto:Test-Equipment at mailman.qth.net 
> > 
> > This list hosted by:  http://www.qsl.net 
> > Please help support this email list: 
> http://www.qsl.net/donate.html 
> > 
>  
> ____________________________________________________________
> Diet Help
> Cheap Diet Help Tips. Click here.
>  
>
http://thirdpartyoffers.juno.com/TGL2141/c?cp=wjwLfIIAnOAqdy-Un-ArsQAAJ1A
mMEKPTVQY-SXbGjk4roFnAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAAYQAAAAAA=

> 
> ______________________________________________________________
> Test-Equipment mailing list
> Home: 
> http://mailman.qth.net/mailman/listinfo/test-equipment 
> Help:  http://mailman.qth.net/mmfaq.htm 
> Post:  mailto:Test-Equipment at mailman.qth.net 
> 
> This list hosted by:  http://www.qsl.net 
> Please help support this email list: 
> http://www.qsl.net/donate.html 
> 
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
 
____________________________________________________________
Senior Assisted Living
Put your loved ones in good hands with quality senior assisted living. Click now!
http://thirdpartyoffers.juno.com/TGL2141/c?cp=Wy-oLeFeGbweh72DS8sbwwAAJ1AmMEKPTVQY-SXbGjk4roFnAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAASUQAAAAA=

From bluebirdtele at embarqmail.com  Sat Mar  6 20:00:53 2010
From: bluebirdtele at embarqmail.com (Greg Mijal)
Date: Sat, 6 Mar 2010 20:00:53 -0500
Subject: [Test-Equipment] Source of Henry 2K2 2K3 parts needed
Message-ID: <6D9B7D2A7BF241C1810F49102D01DF6E@GregMijalPC>

Hi:

I'm looking for some parts for my Henry 2K3 linear.  The RF deck perforated cover (grey color, the outside cover)
and the 0 - 1 A plate current meter.
Is anyone out there supplying older Henry amp parts on a regular basis?
Thanks
Greg
WA7LYO
Kinston NC

From pmanfre at gmail.com  Sat Mar  6 20:16:54 2010
From: pmanfre at gmail.com (Peter Manfre)
Date: Sat, 06 Mar 2010 20:16:54 -0500
Subject: [Test-Equipment] Source of Henry 2K2 2K3 parts needed
In-Reply-To: <6D9B7D2A7BF241C1810F49102D01DF6E@GregMijalPC>
References: <6D9B7D2A7BF241C1810F49102D01DF6E@GregMijalPC>
Message-ID: <4B92FE86.4000504@gmail.com>

Try Ted Henry at Henry radio ... he has a supply of a lot of the older 
parts.

Pete WA2ODO



On 3/6/2010 8:00 PM, Greg Mijal wrote:
> Hi:
>
> I'm looking for some parts for my Henry 2K3 linear.  The RF deck perforated cover (grey color, the outside cover)
> and the 0 - 1 A plate current meter.
> Is anyone out there supplying older Henry amp parts on a regular basis?
> Thanks
> Greg
> WA7LYO
> Kinston NC
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>    


From cmos at shol.com  Sat Mar  6 22:20:40 2010
From: cmos at shol.com (cmos at shol.com)
Date: Sat, 6 Mar 2010 22:20:40 -0500
Subject: [Test-Equipment] 141T CRT.
Message-ID: <a7341cba131148b886c594804939804d.cmos@shol.com>

Jack,

Thanks anyway.
I will keep looking.

Thanks,
Jim



------- Original Message -------
>From    : K0EWU9[mailto:k0ewu9 at juno.com]
Sent    : 3/6/2010 5:56:40 PM
To      : test-equipment at mailman.qth.net
Cc      : 
Subject : RE: Re: [Test-Equipment] 141T CRT.

  I am very sorry to say that the tube has gone to
air, It has  been
stored in my attic for a few years and I took it ot
of the  box to put it
in aa 141 mainframe to
test it. It looks cloudy -----------so no go.
jack
On Fri, 5 Mar 2010 12:06:21 -0500 "cmos at shol.com"
<cmos at shol.com> writes:
> Jack,
> 
> I am definitely interested in this crt for the 141T.
> How much would the s+h to 15552 be?
> Make sure it will be packaged very well.
> Also, do you have a ups store near you?
> If so, some have an unconditional protection,
> that if they pack it and it is damaged that 
> they will cover the damage no questions ask.
> I forget the name of that program off hand.
> 
> Anyway, let me know what S+H is.
> And do you except Paypal?
> If so, what is the Paypal name/email?
> 
> Thanks,
> Jim 
> 
> 
> 
> ------- Original Message -------
> >From    : K0EWU9[ mailto:k0ewu9 at juno.com] 
> Sent    : 3/5/2010 10:22:11 AM
> To      : test-equipment at mailman.qth.net
> Cc      : 
> Subject : RE: [Test-Equipment] 141T CRT.
> 
>   I have a good crtfor the unit, 45.00lus shipping,
> this crt must be
> shipped flat so packing will be unique!
> Jack
> 
> On Thu, 4 Mar 2010 20:28:49 -0500 "cmos at shol.com"
> <cmos at shol.com> writes:
> > All,
> > 
> > I had an HP 141T spectrum analyzer sent to me
> > via UPS. Well, it arrived with the back dented
> > in by the back of the crt. The crt socket cover
> > was broken off and you guessed it, the crt was
> > broken.
> > 
> > There was several inches of packaging material
> > between the box and the unit. the box was riped
> > were the impact accrued. It is obvious that this
> > was rammed or was dropped from a hight onto 
> > something, after all this is a 70+ pound item. 
> > 
> > But UPS is refusing the damage claim, and saying
> > that it had "insufficient packaging".
> > Doing a web search to figure out what to do only
> > resulted in finding out they seem to tell
> > everyone that. When I try to ask them about it
> > they pass the buck to the ups store that it was
> > sent form. When I talk to the ups store, they say
> > that ups told them the same and that ups has also
> > denied there appeal. 
> > 
> > Has any one had any experience with ups denying 
> > a claim? And what did you do about it?
> > 
> > Also, any one have a used HP 141T CRT for sell?
> > 
> > Thanks,
> > Jim      
> >  
> > 
> >   
> > 
> >
>
______________________________________________________________
> > Test-Equipment mailing list
> > Home: 
> 
http://mailman.qth.net/mailman/listinfo/test-equipment  
> > Help:   http://mailman.qth.net/mmfaq.htm  
> > Post:   mailto:Test-Equipment at mailman.qth.net  
> > 
> > This list hosted by:   http://www.qsl.net  
> > Please help support this email list: 
>  http://www.qsl.net/donate.html  
> > 
>  
>
____________________________________________________________
> Diet Help
> Cheap Diet Help Tips. Click here.
>  
>
 http://thirdpartyoffers.juno.com/TGL2141/c?cp=wjwLfIIAnOAqdy-Un-ArsQAAJ1A

mMEKPTVQY-SXbGjk4roFnAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAAYQAAAAAA=

> 
>
______________________________________________________________
> Test-Equipment mailing list
> Home: 
> 
http://mailman.qth.net/mailman/listinfo/test-equipment  
> Help:   http://mailman.qth.net/mmfaq.htm  
> Post:   mailto:Test-Equipment at mailman.qth.net  
> 
> This list hosted by:   http://www.qsl.net  
> Please help support this email list: 
>  http://www.qsl.net/donate.html  
> 
>
______________________________________________________________
> Test-Equipment mailing list
> Home: 
http://mailman.qth.net/mailman/listinfo/test-equipment 
> Help:  http://mailman.qth.net/mmfaq.htm 
> Post:  mailto:Test-Equipment at mailman.qth.net 
> 
> This list hosted by:  http://www.qsl.net 
> Please help support this email list: 
http://www.qsl.net/donate.html 
> 
 
____________________________________________________________
Senior Assisted Living
Put your loved ones in good hands with quality senior
assisted living. Click now!
 http://thirdpartyoffers.juno.com/TGL2141/c?cp=Wy-oLeFeGbweh72DS8sbwwAAJ1AmMEKPTVQY-SXbGjk4roFnAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAASUQAAAAA=

______________________________________________________________
Test-Equipment mailing list
Home: 
http://mailman.qth.net/mailman/listinfo/test-equipment 
Help:  http://mailman.qth.net/mmfaq.htm 
Post:  mailto:Test-Equipment at mailman.qth.net 

This list hosted by:  http://www.qsl.net 
Please help support this email list: 
http://www.qsl.net/donate.html 


From WA5CAB at cs.com  Sat Mar  6 23:34:24 2010
From: WA5CAB at cs.com (WA5CAB at cs.com)
Date: Sat, 6 Mar 2010 23:34:24 EST
Subject: [Test-Equipment] 5AQP1 CRT's
Message-ID: <6d712.11aa1bb2.38c486d0@cs.com>

Group,

I have several (4 supposedly) 5AQP1 CRT's NOS.  I have the Dumont spec 
sheets but have no idea what equipment they were used in.  If anyone has any 
need for one or more, let me know.  FYI, this is a 5" (obvious) diameter flat 
faced green phosphor medium frequency CRT.  Eb 4 KV.  

Robert Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480

From mrharisn at hughes.net  Sun Mar  7 01:13:59 2010
From: mrharisn at hughes.net (mrharisn at hughes.net)
Date: Sun, 7 Mar 2010 06:13:59 +0000 (GMT)
Subject: [Test-Equipment] Scope help needed!!!!
References: <817858.98525.qm@web111711.mail.gq1.yahoo.com>
	<4B8C0ED4.5010400@comcast.net>
	<2F1FD27C-808E-418B-8556-121F9716FDDB@mac.com>
	<838DC1094AB24E58887EF09978796A34@HP>
Message-ID: <576818309.104652.1267942439095.JavaMail.mail@webmail04>


From w7ksg at q.com  Sun Mar  7 11:52:56 2010
From: w7ksg at q.com (J ALLEN CALL)
Date: Sun, 7 Mar 2010 16:52:56 +0000
Subject: [Test-Equipment] FS: Electrostatic Voltmeter
Message-ID: <SNT127-W374969A15F476885831AE7FB360@phx.gbl>



Sensitive  Research Instrument Corporation Model ESD High Sensitivity Electro-Static Voltmeter. Accuracy 1%. Measures 0-1500V DC and AC at all frequencies.  The drawn scale is 5 inches in length with a white enamel finish, with a knife edge pointer moving over a flat mirror to avoid parallax errors in reading.  Housed in a portable walnut case which measures 8 inches x 7-1/2 inches x 6 inches. Chrome plated hardware and a heavy leather carrying strap.   Excellent condition and as new.  Guaranteed.  $250.00. Can be shipped via large flat rate USPS container for $14.95 which includes insurance.
 



 		 	   		  

From n4buq at knology.net  Sun Mar  7 21:18:55 2010
From: n4buq at knology.net (Barry)
Date: Sun, 7 Mar 2010 20:18:55 -0600
Subject: [Test-Equipment] Looking for manual for HP-8654A
References: <SNT127-W374969A15F476885831AE7FB360@phx.gbl>
Message-ID: <000a01cabe65$b4b58610$6501a8c0@ingrnet.com>

Anyone know of an online source for a manal for an HP-8654A?

Thanks,
Barry - N4BUQ

From jmercado at oyogeospace.com  Mon Mar  8 07:11:35 2010
From: jmercado at oyogeospace.com (Jose Mercado)
Date: Mon, 8 Mar 2010 06:11:35 -0600
Subject: [Test-Equipment] UPS damage to test equipment.
In-Reply-To: <4B91293C.9000309@pacific.net>
Message-ID: <CBB7129AB710B6488144EB97D70B6C446401C8@geomail1.geospace.local>

Whether it is proper packaging or not the consistency in handling
packages without attention to detail is extended within the UPS
Businesses infrastructure. Just because it is not package correctly does
not extend the benefit to UPS of throwing it around, or dropping it.
Does this mean package your items in a demolition proof box. I do not
subscribe to using this business or promote it's operation within the
many organizations I am a member. 

-----Original Message-----
From: test-equipment-bounces at mailman.qth.net
[mailto:test-equipment-bounces at mailman.qth.net] On Behalf Of Brooke
Clarke
Sent: Friday, March 05, 2010 9:55 AM
To: Discussion of Electronic Test Equipment
Subject: Re: [Test-Equipment] UPS damage to test equipment.

Hi Jim:

 From what you've said it's hard to tell if it was the fault of UPS, but
my guess is that the problem was poor packaging.
I've received many rack mount sized items via UPS and other carriers
without damage (and some that were damaged).  The key is proper
packaging.  To see many examples of things that I've received with good
and poor packaging see:  http://prc68.com/I/Pack.shtml

Have Fun,

Brooke Clarke
http://www.PRC68.com


cmos at shol.com wrote:
> All,
>
> I had an HP 141T spectrum analyzer sent to me via UPS. Well, it 
> arrived with the back dented in by the back of the crt. The crt socket

> cover was broken off and you guessed it, the crt was broken.
>
> There was several inches of packaging material between the box and the

> unit. the box was riped were the impact accrued. It is obvious that 
> this was rammed or was dropped from a hight onto something, after all 
> this is a 70+ pound item.
>
> But UPS is refusing the damage claim, and saying that it had 
> "insufficient packaging".
> Doing a web search to figure out what to do only resulted in finding 
> out they seem to tell everyone that. When I try to ask them about it 
> they pass the buck to the ups store that it was sent form. When I talk

> to the ups store, they say that ups told them the same and that ups 
> has also denied there appeal.
>
> Has any one had any experience with ups denying a claim? And what did 
> you do about it?
>
> Also, any one have a used HP 141T CRT for sell?
>
> Thanks,
> Jim
>
>
>
>
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email

> list: http://www.qsl.net/donate.html
>
>
>    

______________________________________________________________
Test-Equipment mailing list
Home: http://mailman.qth.net/mailman/listinfo/test-equipment
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Test-Equipment at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

From anchor at ec.rr.com  Mon Mar  8 08:29:40 2010
From: anchor at ec.rr.com (Al Parker)
Date: Mon, 8 Mar 2010 08:29:40 -0500
Subject: [Test-Equipment] Looking for manual for HP-8654A
References: <SNT127-W374969A15F476885831AE7FB360@phx.gbl>
	<000a01cabe65$b4b58610$6501a8c0@ingrnet.com>
Message-ID: <855898CEE9064193B78D593D6CC8DACD@AWPLAP>

Hi Barry,
    IF you don't find anything helpful, I have an orig. manual for my 
HP-8654B, and will look up anything I can for you.  Might be able to scan 
some if it can be opened up without breaking the spine.  Also have then for 
the 8655A & 11710B.
    Hope you're getting some warmer wx down there these days, it's supposed 
to hit 60 hr today, finally.
73,
Al, W8UT
New Bern, NC
www.boatanchors.org
www.hammalund.info

"there is nothing -absolutely nothing- half as much worth doing as
 simply messing about in boats."
   Ratty, to Mole


----- Original Message ----- 
From: "Barry" <n4buq at knology.net>
To: <test-equipment at mailman.qth.net>
Sent: Sunday, March 07, 2010 9:18 PM
Subject: [Test-Equipment] Looking for manual for HP-8654A


> Anyone know of an online source for a manal for an HP-8654A?
>
> Thanks,
> Barry - N4BUQ
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 


From josepho at shaw.ca  Mon Mar  8 13:52:34 2010
From: josepho at shaw.ca (Joseph Orgnero)
Date: Mon, 8 Mar 2010 10:52:34 -0800
Subject: [Test-Equipment] FS manuals & books
Message-ID: <E97560ADC20F4E4AB4067200F48712EF@OWNERM2R4RQDZL>

For sale manuals & books:
Tektronix 3A1 dual-trace amplifier   $  3.00
     "        3B3 plug-in unit              $  3.00
Both above                                  $  5.00
Tektronix 317 scope                     $  4.00
RCA Basic Test Equipment Books 1-2    $  3.00
101 Easy test Instrument Projects - 127 p.  $  3.00
Electronic Instruments & Measurements  106 p.  $ 3.00
Working with the Oscilloscope  104 p.   $  3.00

Above prices plus S&H
Other titles available, send for list if interested.
Thanks
Joe Orgnero VE&LBI

From bluebirdtele at embarqmail.com  Mon Mar  8 14:04:43 2010
From: bluebirdtele at embarqmail.com (Greg Mijal)
Date: Mon, 8 Mar 2010 14:04:43 -0500
Subject: [Test-Equipment] Fw: [Swan] FOR SALE: Cinch Jones 12 pin connectors
	- NOS Female/powercable side - 10 available
Message-ID: <EDFBEECC5BCE41F494F705DC155ADD09@GregMijalPC>


----- Original Message ----- 
From: "Greg Mijal" <bluebirdtele at embarqmail.com>
To: "Discussion of equipment manufactured by Swan" <swan at mailman.qth.net>
Cc: <drake at mailman.qrh.net>; <boatanchor at mailman.qth.net>
Sent: Monday, March 08, 2010 11:13 AM
Subject: [Swan] FOR SALE: Cinch Jones 12 pin connectors - NOS 
Female/powercable side - 10 available


> For Sale:
>
> 12 pin Cinch Jones connector for Swans, Drakes and anything else that uses 
> them.
> This is the female connector for the power supply cable, not the male 
> radio side.
> Unused and complete with hood, cable stay and locking pin.  Bright metal 
> lugs for easy soldering.
> Connectors fit snugly to the males and should end any intermittant cable 
> problems you may be experiencing.
>
> Price: $7 each plus $3 shipping to the 48 continuous states.  All other 
> addresses:
> $7.50 plus actual shipping charge.  Ships in padded envelope.
> No discounts for multiple purchases but will combine shipping into one 
> price and one shipper.
> If you want to buy please email me a confirmation statement and I will 
> give you my mailing address for payment.
> Money orders orpersonal checks accepted. No Paypal please.
> First come, first served.
> Thank you
> Greg
> WA7LYO
> Kinston NC
>
> ______________________________________________________________
> Swan mailing list
> Home: http://mailman.qth.net/mailman/listinfo/swan
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Swan at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 


From Telegrapher at att.net  Mon Mar  8 14:31:43 2010
From: Telegrapher at att.net (Telegrapher at att.net)
Date: Mon, 08 Mar 2010 19:31:43 +0000
Subject: [Test-Equipment] Fw: [Swan] FOR SALE: Cinch Jones 12 pin
	connectors- NOS Female/powercable side - 10 available
In-Reply-To: <EDFBEECC5BCE41F494F705DC155ADD09@GregMijalPC>
Message-ID: <030820101931.10855.4B95509E0008852E00002A6722230703629B0A02D29B9B0EBF9D0A089F0E9D090A040AAB@att.net>


 
I'm going to need one of those Greg.  Hopefully my computer won't bomb out this time.  

Larry
W0OGH


  -------------- Original message from "Greg Mijal" <bluebirdtele at embarqmail.com>: --------------


> 
> ----- Original Message ----- 
> From: "Greg Mijal" 
> To: "Discussion of equipment manufactured by Swan" 
> Cc: ; 
> Sent: Monday, March 08, 2010 11:13 AM
> Subject: [Swan] FOR SALE: Cinch Jones 12 pin connectors - NOS 
> Female/powercable side - 10 available
> 
> 
> > For Sale:
> >
> > 12 pin Cinch Jones connector for Swans, Drakes and anything else that uses 
> > them.
> > This is the female connector for the power supply cable, not the male 
> > radio side.
> > Unused and complete with hood, cable stay and locking pin.  Bright metal 
> > lugs for easy soldering.
> > Connectors fit snugly to the males and should end any intermittant cable 
> > problems you may be experiencing.
> >
> > Price: $7 each plus $3 shipping to the 48 continuous states.  All other 
> > addresses:
> > $7.50 plus actual shipping charge.  Ships in padded envelope.
> > No discounts for multiple purchases but will combine shipping into one 
> > price and one shipper.
> > If you want to buy please email me a confirmation statement and I will 
> > give you my mailing address for payment.
> > Money orders orpersonal checks accepted. No Paypal please.
> > First come, first served.
> > Thank you
> > Greg
> > WA7LYO
> > Kinston NC
> >
> > ______________________________________________________________
> > Swan mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/swan
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Swan at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html 
> 
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

From wb6blv at inreach.com  Mon Mar  8 16:33:24 2010
From: wb6blv at inreach.com (WB6BLV (DM06))
Date: Mon, 8 Mar 2010 13:33:24 -0800
Subject: [Test-Equipment] 141T CRT
Message-ID: <015001cabf06$fbab58a0$4401a8c0@gateway.2wire.net>

what CRT does it use?

John
WB6BLV at inreach.com

From bluebirdtele at embarqmail.com  Mon Mar  8 17:10:53 2010
From: bluebirdtele at embarqmail.com (Greg Mijal)
Date: Mon, 8 Mar 2010 17:10:53 -0500
Subject: [Test-Equipment] 12 pin cinch jones - confirmation email
In-Reply-To: <030820101931.10855.4B95509E0008852E00002A6722230703629B0A02D29B9B0EBF9D0A089F0E9D090A040AAB@att.net>
References: <030820101931.10855.4B95509E0008852E00002A6722230703629B0A02D29B9B0EBF9D0A089F0E9D090A040AAB@att.net>
Message-ID: <038A46AC2AEF44F7B69ED107A378D518@GregMijalPC>

Hi Larry:

Good to hear from you.
Please send your check or money order to:

Greg Mijal
303 Wilson Ave.
Kinston, NC 28501
Please confirm this email and I will set one aside for you.
Thanks
Greg
WA7LYO
Kinston NC
----- Original Message ----- 
From: <Telegrapher at att.net>
To: "Discussion of Electronic Test Equipment" 
<test-equipment at mailman.qth.net>
Sent: Monday, March 08, 2010 2:31 PM
Subject: Re: [Test-Equipment] Fw: [Swan] FOR SALE: Cinch Jones 12 
pinconnectors- NOS Female/powercable side - 10 available


>
>
> I'm going to need one of those Greg.  Hopefully my computer won't bomb out 
> this time.
>
> Larry
> W0OGH
>
>
>  -------------- Original message from "Greg Mijal" 
> <bluebirdtele at embarqmail.com>: --------------
>
>
>>
>> ----- Original Message ----- 
>> From: "Greg Mijal"
>> To: "Discussion of equipment manufactured by Swan"
>> Cc: ;
>> Sent: Monday, March 08, 2010 11:13 AM
>> Subject: [Swan] FOR SALE: Cinch Jones 12 pin connectors - NOS
>> Female/powercable side - 10 available
>>
>>
>> > For Sale:
>> >
>> > 12 pin Cinch Jones connector for Swans, Drakes and anything else that 
>> > uses
>> > them.
>> > This is the female connector for the power supply cable, not the male
>> > radio side.
>> > Unused and complete with hood, cable stay and locking pin.  Bright 
>> > metal
>> > lugs for easy soldering.
>> > Connectors fit snugly to the males and should end any intermittant 
>> > cable
>> > problems you may be experiencing.
>> >
>> > Price: $7 each plus $3 shipping to the 48 continuous states.  All other
>> > addresses:
>> > $7.50 plus actual shipping charge.  Ships in padded envelope.
>> > No discounts for multiple purchases but will combine shipping into one
>> > price and one shipper.
>> > If you want to buy please email me a confirmation statement and I will
>> > give you my mailing address for payment.
>> > Money orders orpersonal checks accepted. No Paypal please.
>> > First come, first served.
>> > Thank you
>> > Greg
>> > WA7LYO
>> > Kinston NC
>> >
>> > ______________________________________________________________
>> > Swan mailing list
>> > Home: http://mailman.qth.net/mailman/listinfo/swan
>> > Help: http://mailman.qth.net/mmfaq.htm
>> > Post: mailto:Swan at mailman.qth.net
>> >
>> > This list hosted by: http://www.qsl.net
>> > Please help support this email list: http://www.qsl.net/donate.html
>>
>> ______________________________________________________________
>> Test-Equipment mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Test-Equipment at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 


From w7ksg at q.com  Mon Mar  8 17:38:24 2010
From: w7ksg at q.com (J ALLEN CALL)
Date: Mon, 8 Mar 2010 22:38:24 +0000
Subject: [Test-Equipment] FS: Sencore SC61 Waveform Analyzer
Message-ID: <SNT127-W30CD844689EF6898C272CBFB350@phx.gbl>




Sencore SC61 Waveform Analyzer. PARTS UNIT AS IS . Overall physical condition  excellent but does not work.  It has high voltage.  Bright spot on CRT but no deflection.  Good CRT no burnt spots. $50.00 plus shipping.  

J

W7KSG

 		 	   		  

From WA5CAB at cs.com  Mon Mar  8 17:58:21 2010
From: WA5CAB at cs.com (WA5CAB at cs.com)
Date: Mon, 8 Mar 2010 17:58:21 EST
Subject: [Test-Equipment] FS: AN/URM-127A (SG-377A/URM-127)
Message-ID: <37579.a218656.38c6db0d@cs.com>

Unit is working and complete with manual reprint (TM 11-6625-2725-14&P) and 
AC power cord but less output cable (I didn't get one with it and never 
needed it so didn't build it).  $150.00 plus shipping, OBO.  It was in service 
until a few weeks ago when I finally got around to repairing one of my 
TS-382C's and swapped back.  There is one modification, the addition of a JK-34 
(1/4" phone jack) to make it quicker and easier to test headsets and 
loudspeakers.

Robert Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480

From WA5CAB at cs.com  Mon Mar  8 18:38:25 2010
From: WA5CAB at cs.com (WA5CAB at cs.com)
Date: Mon, 8 Mar 2010 18:38:25 EST
Subject: [Test-Equipment] FS: AN/URM-127A (SG-377A/URM-127)
Message-ID: <3a312.1df9229b.38c6e471@cs.com>

Signal Generator (audio) is in working condition (removed from service just 
before Christmas when I finally got the TS-382C repaired).  Complete with 
AC power cord and reprint of the manual (TM 11-6625-2725-14&P).  One 
modification - addition of a JK-34 (1/4" phone jack) to facilitate testing of 
headsets and loudspeakers.  Otherwise it is box stock.  Asking $150.00 plus 
shipping (what I paid for it) OBO.

Robert Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480

From Telegrapher at att.net  Mon Mar  8 18:47:44 2010
From: Telegrapher at att.net (Telegrapher at att.net)
Date: Mon, 08 Mar 2010 23:47:44 +0000
Subject: [Test-Equipment] 12 pin cinch jones - confirmation email
In-Reply-To: <038A46AC2AEF44F7B69ED107A378D518@GregMijalPC>
References: <030820101931.10855.4B95509E0008852E00002A6722230703629B0A02D29B9B0EBF9D0A089F0E9D090A040AAB@att.net>
	<038A46AC2AEF44F7B69ED107A378D518@GregMijalPC>
Message-ID: <030820102347.19649.4B958C9E000C95E400004CC122230703629B0A02D29B9B0EBF9D0A089F0E9D090A040AAB@att.net>


 Got it.  I'll write the check tonight Greg.  Thanks

Larry
W0OGH


  -------------- Original message from "Greg Mijal" <bluebirdtele at embarqmail.com>: --------------


> Hi Larry:
> 
> Good to hear from you.
> Please send your check or money order to:
> 
> Greg Mijal
> 303 Wilson Ave.
> Kinston, NC 28501
> Please confirm this email and I will set one aside for you.
> Thanks
> Greg
> WA7LYO
> Kinston NC
> ----- Original Message ----- 
> From: 
> To: "Discussion of Electronic Test Equipment" 
> 
> Sent: Monday, March 08, 2010 2:31 PM
> Subject: Re: [Test-Equipment] Fw: [Swan] FOR SALE: Cinch Jones 12 
> pinconnectors- NOS Female/powercable side - 10 available
> 
> 
> >
> >
> > I'm going to need one of those Greg.  Hopefully my computer won't bomb out 
> > this time.
> >
> > Larry
> > W0OGH
> >
> >
> >  -------------- Original message from "Greg Mijal" 
> > : --------------
> >
> >
> >>
> >> ----- Original Message ----- 
> >> From: "Greg Mijal"
> >> To: "Discussion of equipment manufactured by Swan"
> >> Cc: ;
> >> Sent: Monday, March 08, 2010 11:13 AM
> >> Subject: [Swan] FOR SALE: Cinch Jones 12 pin connectors - NOS
> >> Female/powercable side - 10 available
> >>
> >>
> >> > For Sale:
> >> >
> >> > 12 pin Cinch Jones connector for Swans, Drakes and anything else that 
> >> > uses
> >> > them.
> >> > This is the female connector for the power supply cable, not the male
> >> > radio side.
> >> > Unused and complete with hood, cable stay and locking pin.  Bright 
> >> > metal
> >> > lugs for easy soldering.
> >> > Connectors fit snugly to the males and should end any intermittant 
> >> > cable
> >> > problems you may be experiencing.
> >> >
> >> > Price: $7 each plus $3 shipping to the 48 continuous states.  All other
> >> > addresses:
> >> > $7.50 plus actual shipping charge.  Ships in padded envelope.
> >> > No discounts for multiple purchases but will combine shipping into one
> >> > price and one shipper.
> >> > If you want to buy please email me a confirmation statement and I will
> >> > give you my mailing address for payment.
> >> > Money orders orpersonal checks accepted. No Paypal please.
> >> > First come, first served.
> >> > Thank you
> >> > Greg
> >> > WA7LYO
> >> > Kinston NC
> >> >
> >> > ______________________________________________________________
> >> > Swan mailing list
> >> > Home: http://mailman.qth.net/mailman/listinfo/swan
> >> > Help: http://mailman.qth.net/mmfaq.htm
> >> > Post: mailto:Swan at mailman.qth.net
> >> >
> >> > This list hosted by: http://www.qsl.net
> >> > Please help support this email list: http://www.qsl.net/donate.html
> >>
> >> ______________________________________________________________
> >> Test-Equipment mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Test-Equipment at mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> > ______________________________________________________________
> > Test-Equipment mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Test-Equipment at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > 
> 
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

From bluebirdtele at embarqmail.com  Mon Mar  8 22:04:06 2010
From: bluebirdtele at embarqmail.com (Greg Mijal)
Date: Mon, 8 Mar 2010 22:04:06 -0500
Subject: [Test-Equipment] 12 pin cinch jones - confirmation email
In-Reply-To: <030820102347.19649.4B958C9E000C95E400004CC122230703629B0A02D29B9B0EBF9D0A089F0E9D090A040AAB@att.net>
References: <030820101931.10855.4B95509E0008852E00002A6722230703629B0A02D29B9B0EBF9D0A089F0E9D090A040AAB@att.net><038A46AC2AEF44F7B69ED107A378D518@GregMijalPC>
	<030820102347.19649.4B958C9E000C95E400004CC122230703629B0A02D29B9B0EBF9D0A089F0E9D090A040AAB@att.net>
Message-ID: <2AAB45ADC1204B0987D744283DA6806D@GregMijalPC>

OK Larry:
Thanks.

The reason I'm asking fior a confirmation email is that alot of guys seem to 
disappear after saying they want to buy a part or whatever.  No one seems to 
forget buying a whole radio.  Weird huh?
You're connector is reserved.
73's
Greg
WA7LYO
Kinston NC
----- Original Message ----- 
From: <Telegrapher at att.net>
To: "Discussion of Electronic Test Equipment" 
<test-equipment at mailman.qth.net>
Sent: Monday, March 08, 2010 6:47 PM
Subject: Re: [Test-Equipment] 12 pin cinch jones - confirmation email


>
> Got it.  I'll write the check tonight Greg.  Thanks
>
> Larry
> W0OGH
>
>
>  -------------- Original message from "Greg Mijal" 
> <bluebirdtele at embarqmail.com>: --------------
>
>
>> Hi Larry:
>>
>> Good to hear from you.
>> Please send your check or money order to:
>>
>> Greg Mijal
>> 303 Wilson Ave.
>> Kinston, NC 28501
>> Please confirm this email and I will set one aside for you.
>> Thanks
>> Greg
>> WA7LYO
>> Kinston NC
>> ----- Original Message ----- 
>> From:
>> To: "Discussion of Electronic Test Equipment"
>>
>> Sent: Monday, March 08, 2010 2:31 PM
>> Subject: Re: [Test-Equipment] Fw: [Swan] FOR SALE: Cinch Jones 12
>> pinconnectors- NOS Female/powercable side - 10 available
>>
>>
>> >
>> >
>> > I'm going to need one of those Greg.  Hopefully my computer won't bomb 
>> > out
>> > this time.
>> >
>> > Larry
>> > W0OGH
>> >
>> >
>> >  -------------- Original message from "Greg Mijal"
>> > : --------------
>> >
>> >
>> >>
>> >> ----- Original Message ----- 
>> >> From: "Greg Mijal"
>> >> To: "Discussion of equipment manufactured by Swan"
>> >> Cc: ;
>> >> Sent: Monday, March 08, 2010 11:13 AM
>> >> Subject: [Swan] FOR SALE: Cinch Jones 12 pin connectors - NOS
>> >> Female/powercable side - 10 available
>> >>
>> >>
>> >> > For Sale:
>> >> >
>> >> > 12 pin Cinch Jones connector for Swans, Drakes and anything else 
>> >> > that
>> >> > uses
>> >> > them.
>> >> > This is the female connector for the power supply cable, not the 
>> >> > male
>> >> > radio side.
>> >> > Unused and complete with hood, cable stay and locking pin.  Bright
>> >> > metal
>> >> > lugs for easy soldering.
>> >> > Connectors fit snugly to the males and should end any intermittant
>> >> > cable
>> >> > problems you may be experiencing.
>> >> >
>> >> > Price: $7 each plus $3 shipping to the 48 continuous states.  All 
>> >> > other
>> >> > addresses:
>> >> > $7.50 plus actual shipping charge.  Ships in padded envelope.
>> >> > No discounts for multiple purchases but will combine shipping into 
>> >> > one
>> >> > price and one shipper.
>> >> > If you want to buy please email me a confirmation statement and I 
>> >> > will
>> >> > give you my mailing address for payment.
>> >> > Money orders orpersonal checks accepted. No Paypal please.
>> >> > First come, first served.
>> >> > Thank you
>> >> > Greg
>> >> > WA7LYO
>> >> > Kinston NC
>> >> >
>> >> > ______________________________________________________________
>> >> > Swan mailing list
>> >> > Home: http://mailman.qth.net/mailman/listinfo/swan
>> >> > Help: http://mailman.qth.net/mmfaq.htm
>> >> > Post: mailto:Swan at mailman.qth.net
>> >> >
>> >> > This list hosted by: http://www.qsl.net
>> >> > Please help support this email list: http://www.qsl.net/donate.html
>> >>
>> >> ______________________________________________________________
>> >> Test-Equipment mailing list
>> >> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
>> >> Help: http://mailman.qth.net/mmfaq.htm
>> >> Post: mailto:Test-Equipment at mailman.qth.net
>> >>
>> >> This list hosted by: http://www.qsl.net
>> >> Please help support this email list: http://www.qsl.net/donate.html
>> > ______________________________________________________________
>> > Test-Equipment mailing list
>> > Home: http://mailman.qth.net/mailman/listinfo/test-equipment
>> > Help: http://mailman.qth.net/mmfaq.htm
>> > Post: mailto:Test-Equipment at mailman.qth.net
>> >
>> > This list hosted by: http://www.qsl.net
>> > Please help support this email list: http://www.qsl.net/donate.html
>> >
>>
>> ______________________________________________________________
>> Test-Equipment mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Test-Equipment at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 


From cmos at shol.com  Mon Mar  8 23:57:27 2010
From: cmos at shol.com (cmos at shol.com)
Date: Mon, 8 Mar 2010 23:57:27 -0500
Subject: [Test-Equipment] 141T CRT
Message-ID: <df51eb3b197f48e3a65119125b39daaa.cmos@shol.com>

John,

The 141T crt # is:
5083-2511

There may have been others, but that
seems to be the common one.

Jim,
 
----
 what CRT does it use?

John
WB6BLV at inreach.com
______________________________________________________________
Test-Equipment mailing list
Home: 
http://mailman.qth.net/mailman/listinfo/test-equipment 
Help:  http://mailman.qth.net/mmfaq.htm 
Post:  mailto:Test-Equipment at mailman.qth.net 

This list hosted by:  http://www.qsl.net 
Please help support this email list: 
http://www.qsl.net/donate.html 


From mrmanes at gmail.com  Tue Mar  9 01:32:29 2010
From: mrmanes at gmail.com (Mike Manes)
Date: Mon, 08 Mar 2010 23:32:29 -0700
Subject: [Test-Equipment] Looking for manual for HP-8654A
In-Reply-To: <855898CEE9064193B78D593D6CC8DACD@AWPLAP>
References: <SNT127-W374969A15F476885831AE7FB360@phx.gbl>	<000a01cabe65$b4b58610$6501a8c0@ingrnet.com>
	<855898CEE9064193B78D593D6CC8DACD@AWPLAP>
Message-ID: <4B95EB7D.30602@gmail.com>

Hi Al,

You might consider loaning your copy to ArtekMedia.com.  They'll
give you 2 freebie CDs of their high rez scans and send the original
back to you.  They also buy good-quality manuals. The 8645A isn't on
their wish list, but it may be worth a shot.

I'm just a satisfied 2x customer.  A good quality .pdf of a manual for
under $10 is a great deal if you can't get the real thing inside your
budget.

73 de Mike W5VSI

On 3/8/2010 06:29, Al Parker wrote:
> Hi Barry,
>      IF you don't find anything helpful, I have an orig. manual for my
> HP-8654B, and will look up anything I can for you.  Might be able to scan
> some if it can be opened up without breaking the spine.  Also have then for
> the 8655A&  11710B.
>      Hope you're getting some warmer wx down there these days, it's supposed
> to hit 60 hr today, finally.
> 73,
> Al, W8UT
> New Bern, NC
> www.boatanchors.org
> www.hammalund.info
>
> "there is nothing -absolutely nothing- half as much worth doing as
>   simply messing about in boats."
>     Ratty, to Mole
>
>
> ----- Original Message -----
> From: "Barry"<n4buq at knology.net>
> To:<test-equipment at mailman.qth.net>
> Sent: Sunday, March 07, 2010 9:18 PM
> Subject: [Test-Equipment] Looking for manual for HP-8654A
>
>
>> Anyone know of an online source for a manal for an HP-8654A?
>>
>> Thanks,
>> Barry - N4BUQ
>> ______________________________________________________________
>> Test-Equipment mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Test-Equipment at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

-- 
Mike Manes    mrmanes at gmail.com     Tel: 303-979-4899
"Things should be made as simple as possible, but not more so."
A. Einstein

From appo2 at juno.com  Tue Mar  9 04:18:30 2010
From: appo2 at juno.com (appo2 at juno.com)
Date: Tue, 9 Mar 2010 01:18:30 -0800
Subject: [Test-Equipment] 141T CRT
Message-ID: <20100309.011831.1560.0.appo2@juno.com>

How do you people repair 141T crt,,,here in a desert,,lamination of flat
high voltage cable get separated,arcs,and kill the main board.
my question is how re-lamination can be done?
I got lots of 141Ts ,,,because of the same problems.I will give you one
141T free,,if you give me the flat cable that will never arc.
K7FT

tks
On Mon, 8 Mar 2010 23:57:27 -0500 "cmos at shol.com" <cmos at shol.com> writes:
> John,
> 
> The 141T crt # is:
> 5083-2511
> 
> There may have been others, but that
> seems to be the common one.
> 
> Jim,
>  
> ----
>  what CRT does it use?
> 
> John
> WB6BLV at inreach.com
> ______________________________________________________________
> Test-Equipment mailing list
> Home: 
> http://mailman.qth.net/mailman/listinfo/test-equipment 
> Help:  http://mailman.qth.net/mmfaq.htm 
> Post:  mailto:Test-Equipment at mailman.qth.net 
> 
> This list hosted by:  http://www.qsl.net 
> Please help support this email list: 
> http://www.qsl.net/donate.html 
> 
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 

____________________________________________________________
Get Free Email with Video Mail & Video Chat!
http://www.juno.com/freeemail?refcd=JUTAGOUT1FREM0210

From appo2 at juno.com  Tue Mar  9 04:34:28 2010
From: appo2 at juno.com (appo2 at juno.com)
Date: Tue, 9 Mar 2010 01:34:28 -0800
Subject: [Test-Equipment] 141T CRT
Message-ID: <20100309.013429.1560.1.appo2@juno.com>

I forgot to mention,,,here in a desert ,,,RacalDana 1992 frequency
counter,
I have two of them to get rid of,,,,
Problem is conductive rubber of the keyboard,,,all dried up,,and I can
not use them any more.The same problem like 141Ts.
I recommend to use 140Ts,,,much useful than 141Ts.By the way,,,there are
several 141Ts,,,,some of them ,,burns 8555As as soon as you turn it ON.

K7FT
On Mon, 8 Mar 2010 23:57:27 -0500 "cmos at shol.com" <cmos at shol.com> writes:
> John,
> 
> The 141T crt # is:
> 5083-2511
> 
> There may have been others, but that
> seems to be the common one.
> 
> Jim,
>  
> ----
>  what CRT does it use?
> 
> John
> WB6BLV at inreach.com
> ______________________________________________________________
> Test-Equipment mailing list
> Home: 
> http://mailman.qth.net/mailman/listinfo/test-equipment 
> Help:  http://mailman.qth.net/mmfaq.htm 
> Post:  mailto:Test-Equipment at mailman.qth.net 
> 
> This list hosted by:  http://www.qsl.net 
> Please help support this email list: 
> http://www.qsl.net/donate.html 
> 
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 
____________________________________________________________
Weight Loss Program
Best Weight Loss Program - Click Here!
http://thirdpartyoffers.juno.com/TGL2141/c?cp=eojhsf-PvIs0urUwVIZa4AAAJ1AmMEKPTVQY-SXbGjk4roFnAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAAEUgAAAAA=

From cmos at shol.com  Tue Mar  9 12:27:06 2010
From: cmos at shol.com (cmos at shol.com)
Date: Tue, 9 Mar 2010 12:27:06 -0500
Subject: [Test-Equipment] 141T CRT
Message-ID: <765a5e6e9ee6495bb9c5633ecdb7033c.cmos@shol.com>

Hello,

I am not as familiar with the cable
on the 141T yet, I am still looking
for a tube for my 141T.

But I have had a similar problem with an
HP 17xx. The cable de-laminated and was arcing.
I tried to rtv and what not, to no avail.
Finlay I just decided to take the HV part 
of that cable out of the equation. I cut the 
ends of the HV part of that cable out and 
just run some 20kv wire between the HV board
and the crt anode. That solved that problem
on the HP 17xx, I am not sure if that will be 
as easy to do on the 141T.

Hope this helps,
Jim

------- Original Message -------
>From    : appo2 at juno.com[mailto:appo2 at juno.com]
Sent    : 3/9/2010 4:18:30 AM
To      : test-equipment at mailman.qth.net
Cc      : 
Subject : RE: Re: [Test-Equipment] 141T CRT

 How do you people repair 141T crt,,,here in a
desert,,lamination of flat
high voltage cable get separated,arcs,and kill the
main board.
my question is how re-lamination can be done?
I got lots of 141Ts ,,,because of the same problems.I
will give you one
141T free,,if you give me the flat cable that will
never arc.
K7FT

tks
On Mon, 8 Mar 2010 23:57:27 -0500 "cmos at shol.com"
<cmos at shol.com> writes:
> John,
> 
> The 141T crt # is:
> 5083-2511
> 
> There may have been others, but that
> seems to be the common one.
> 
> Jim,
>  
> ----
>  what CRT does it use?
> 
> John
> WB6BLV at inreach.com
>
______________________________________________________________
> Test-Equipment mailing list
> Home: 
> 
http://mailman.qth.net/mailman/listinfo/test-equipment  
> Help:   http://mailman.qth.net/mmfaq.htm  
> Post:   mailto:Test-Equipment at mailman.qth.net  
> 
> This list hosted by:   http://www.qsl.net  
> Please help support this email list: 
>  http://www.qsl.net/donate.html  
> 
>
______________________________________________________________
> Test-Equipment mailing list
> Home: 
http://mailman.qth.net/mailman/listinfo/test-equipment 
> Help:  http://mailman.qth.net/mmfaq.htm 
> Post:  mailto:Test-Equipment at mailman.qth.net 
> 
> This list hosted by:  http://www.qsl.net 
> Please help support this email list: 
http://www.qsl.net/donate.html 
> 
> 

____________________________________________________________
Get Free Email with Video Mail & Video Chat!
 http://www.juno.com/freeemail?refcd=JUTAGOUT1FREM0210 
______________________________________________________________
Test-Equipment mailing list
Home: 
http://mailman.qth.net/mailman/listinfo/test-equipment 
Help:  http://mailman.qth.net/mmfaq.htm 
Post:  mailto:Test-Equipment at mailman.qth.net 

This list hosted by:  http://www.qsl.net 
Please help support this email list: 
http://www.qsl.net/donate.html 


From WA5CAB at cs.com  Tue Mar  9 12:35:05 2010
From: WA5CAB at cs.com (WA5CAB at cs.com)
Date: Tue, 9 Mar 2010 12:35:05 EST
Subject: [Test-Equipment] RTV  141T CRT
Message-ID: <107b0.7bdba14f.38c7e0c9@cs.com>

Jim,

This has nothing directly to do with HP or CRT's or etc.  But RTV contains 
Acetic Acid, which is conductive.  If it fails to fully cure you have a 
leaky (electrically) situation.  I learned this (the hard way) decades ago 
building "chill chasers" for mobile pipeline X-ray units.

In a message dated 3/9/2010 11:29:18 AM Central Standard Time, 
cmos at shol.com writes: 
> Hello,
> 
> I am not as familiar with the cable
> on the 141T yet, I am still looking
> for a tube for my 141T.
> 
> But I have had a similar problem with an
> HP 17xx. The cable de-laminated and was arcing.
> I tried to rtv and what not, to no avail.
> Finlay I just decided to take the HV part 
> of that cable out of the equation. I cut the 
> ends of the HV part of that cable out and 
> just run some 20kv wire between the HV board
> and the crt anode. That solved that problem
> on the HP 17xx, I am not sure if that will be 
> as easy to do on the 141T.
> 
> Hope this helps,
> Jim
> 

Robert & Susan Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480

From jfor at quik.com  Tue Mar  9 12:34:14 2010
From: jfor at quik.com (J. Forster)
Date: Tue, 9 Mar 2010 09:34:14 -0800 (PST)
Subject: [Test-Equipment] RTV  141T CRT
In-Reply-To: <107b0.7bdba14f.38c7e0c9@cs.com>
References: <107b0.7bdba14f.38c7e0c9@cs.com>
Message-ID: <58488.12.6.201.2.1268156054.squirrel@popaccts.quik.com>

There was recently a looooong thread on this issue on the HP-Agilent
Group. There are "neutral cure" RTVs that are apparently non-conductive.

-John

============


> Jim,
>
> This has nothing directly to do with HP or CRT's or etc.  But RTV contains
> Acetic Acid, which is conductive.  If it fails to fully cure you have a
> leaky (electrically) situation.  I learned this (the hard way) decades ago
> building "chill chasers" for mobile pipeline X-ray units.
>
> In a message dated 3/9/2010 11:29:18 AM Central Standard Time,
> cmos at shol.com writes:
>> Hello,
>>
>> I am not as familiar with the cable
>> on the 141T yet, I am still looking
>> for a tube for my 141T.
>>
>> But I have had a similar problem with an
>> HP 17xx. The cable de-laminated and was arcing.
>> I tried to rtv and what not, to no avail.
>> Finlay I just decided to take the HV part
>> of that cable out of the equation. I cut the
>> ends of the HV part of that cable out and
>> just run some 20kv wire between the HV board
>> and the crt anode. That solved that problem
>> on the HP 17xx, I am not sure if that will be
>> as easy to do on the 141T.
>>
>> Hope this helps,
>> Jim
>>
>
> Robert & Susan Downs - Houston
> wa5cab dot com (Web Store)
> MVPA 9480
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>



From cmos at shol.com  Tue Mar  9 15:41:10 2010
From: cmos at shol.com (cmos at shol.com)
Date: Tue, 9 Mar 2010 15:41:10 -0500
Subject: [Test-Equipment] RTV  141T CRT
Message-ID: <c61f6b4db4d84e7aa3f0e0c77117c66c.cmos@shol.com>


I guess it depends on the RTV. There is some RTV
that are used on HV.

On the other hand I have used some highly conductive 
RTV for rf shielding.
The cheap stuff(nickle/graphite) is $70 a tube.
The costly aerospace stuff(pure silver) is thousands
per tube.

Jim,  

------- Original Message -------
>From    : WA5CAB at cs.com[mailto:WA5CAB at cs.com]
Sent    : 3/9/2010 12:35:05 PM
To      : test-equipment at mailman.qth.net
Cc      : 
Subject : RE: Re: [Test-Equipment] RTV  141T CRT

 Jim,

This has nothing directly to do with HP or CRT's or
etc.  But RTV contains 
Acetic Acid, which is conductive.  If it fails to
fully cure you have a 
leaky (electrically) situation.  I learned this (the
hard way) decades ago 
building "chill chasers" for mobile pipeline X-ray units.

In a message dated 3/9/2010 11:29:18 AM Central
Standard Time, 
cmos at shol.com writes: 
> Hello,
> 
> I am not as familiar with the cable
> on the 141T yet, I am still looking
> for a tube for my 141T.
> 
> But I have had a similar problem with an
> HP 17xx. The cable de-laminated and was arcing.
> I tried to rtv and what not, to no avail.
> Finlay I just decided to take the HV part 
> of that cable out of the equation. I cut the 
> ends of the HV part of that cable out and 
> just run some 20kv wire between the HV board
> and the crt anode. That solved that problem
> on the HP 17xx, I am not sure if that will be 
> as easy to do on the 141T.
> 
> Hope this helps,
> Jim
> 

Robert & Susan Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480
______________________________________________________________
Test-Equipment mailing list
Home: 
http://mailman.qth.net/mailman/listinfo/test-equipment 
Help:  http://mailman.qth.net/mmfaq.htm 
Post:  mailto:Test-Equipment at mailman.qth.net 

This list hosted by:  http://www.qsl.net 
Please help support this email list: 
http://www.qsl.net/donate.html 


From anchor at ec.rr.com  Tue Mar  9 19:09:39 2010
From: anchor at ec.rr.com (Al Parker)
Date: Tue, 09 Mar 2010 19:09:39 -0500
Subject: [Test-Equipment] Looking for manual for HP-8654A
In-Reply-To: <4B95EB7D.30602@gmail.com>
References: <SNT127-W374969A15F476885831AE7FB360@phx.gbl>	<000a01cabe65$b4b58610$6501a8c0@ingrnet.com>	<855898CEE9064193B78D593D6CC8DACD@AWPLAP>
	<4B95EB7D.30602@gmail.com>
Message-ID: <4B96E343.4050101@ec.rr.com>

hi Mike,
     Can they scan  an original without destroying the binding?  I'm not 
interested in selling, but would loan if they're "nice" to them.
73,
Al

On 3/9/2010 1:32 AM, Mike Manes wrote:
> Hi Al,
>
> You might consider loaning your copy to ArtekMedia.com.  They'll
> give you 2 freebie CDs of their high rez scans and send the original
> back to you.  They also buy good-quality manuals. The 8645A isn't on
> their wish list, but it may be worth a shot.
>
> I'm just a satisfied 2x customer.  A good quality .pdf of a manual for
> under $10 is a great deal if you can't get the real thing inside your
> budget.
>
> 73 de Mike W5VSI
>
> On 3/8/2010 06:29, Al Parker wrote:
>    
>> Hi Barry,
>>       IF you don't find anything helpful, I have an orig. manual for my
>> HP-8654B, and will look up anything I can for you.  Might be able to scan
>> some if it can be opened up without breaking the spine.  Also have then for
>> the 8655A&   11710B.
>>       Hope you're getting some warmer wx down there these days, it's supposed
>> to hit 60 hr today, finally.
>> 73,
>> Al, W8UT
>> New Bern, NC
>> www.boatanchors.org
>> www.hammalund.info
>>
>> "there is nothing -absolutely nothing- half as much worth doing as
>>    simply messing about in boats."
>>      Ratty, to Mole
>>
>>
>> ----- Original Message -----
>> From: "Barry"<n4buq at knology.net>
>> To:<test-equipment at mailman.qth.net>
>> Sent: Sunday, March 07, 2010 9:18 PM
>> Subject: [Test-Equipment] Looking for manual for HP-8654A
>>
>>
>>      
>>> Anyone know of an online source for a manal for an HP-8654A?
>>>
>>> Thanks,
>>> Barry - N4BUQ
>>> ______________________________________________________________
>>> Test-Equipment mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Test-Equipment at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>        
>> ______________________________________________________________
>> Test-Equipment mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Test-Equipment at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>      
>    
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.436 / Virus Database: 271.1.1/2732 - Release Date: 03/09/10 07:33:00
>
>    

-- 
Al, W8UT
New Bern, NC
www.boatanchors.org
www.hammarlund.info

"there is nothing -absolutely nothing- half as much worth doing as  simply messing about in boats."
   Ratty, to Mole


From n4buq at knology.net  Tue Mar  9 20:24:44 2010
From: n4buq at knology.net (Barry)
Date: Tue, 9 Mar 2010 19:24:44 -0600
Subject: [Test-Equipment] Looking for manual for HP-8654A
References: <SNT127-W374969A15F476885831AE7FB360@phx.gbl>	<000a01cabe65$b4b58610$6501a8c0@ingrnet.com><855898CEE9064193B78D593D6CC8DACD@AWPLAP>
	<4B95EB7D.30602@gmail.com>
Message-ID: <001601cabff0$7773e260$6501a8c0@ingrnet.com>

> Hi Al,
> 
> You might consider loaning your copy to ArtekMedia.com.  They'll
> give you 2 freebie CDs of their high rez scans and send the original
> back to you.  They also buy good-quality manuals. The 8645A isn't on
> their wish list, but it may be worth a shot.
> 
> I'm just a satisfied 2x customer.  A good quality .pdf of a manual for
> under $10 is a great deal if you can't get the real thing inside your
> budget.
> 
> 73 de Mike W5VSI

ArtekMedia already has the manual.
73,
Barry - N4BUQ

From Telegrapher at att.net  Tue Mar  9 23:26:59 2010
From: Telegrapher at att.net (Telegrapher at att.net)
Date: Wed, 10 Mar 2010 04:26:59 +0000
Subject: [Test-Equipment] 12 pin cinch jones - confirmation email
In-Reply-To: <2AAB45ADC1204B0987D744283DA6806D@GregMijalPC>
References: <030820101931.10855.4B95509E0008852E00002A6722230703629B0A02D29B9B0EBF9D0A089F0E9D090A040AAB@att.net><038A46AC2AEF44F7B69ED107A378D518@GregMijalPC><030820102347.19649.4B958C9E000C95E400004CC122230703629B0A02D29B9B0EBF9D0A089F0E9D090A040AAB@att.net>
	<2AAB45ADC1204B0987D744283DA6806D@GregMijalPC>
Message-ID: <031020100426.25576.4B971F91000A6BAC000063E822228869349B0A02D29B9B0EBF9D0A089F0E9D090A040AAB@att.net>


 In the mail today Greg.

Larry
W0OGH


  -------------- Original message from "Greg Mijal" <bluebirdtele at embarqmail.com>: --------------


> OK Larry:
> Thanks.
> 
> The reason I'm asking fior a confirmation email is that alot of guys seem to 
> disappear after saying they want to buy a part or whatever.  No one seems to 
> forget buying a whole radio.  Weird huh?
> You're connector is reserved.
> 73's
> Greg
> WA7LYO
> Kinston NC
> ----- Original Message ----- 
> From: 
> To: "Discussion of Electronic Test Equipment" 
> 
> Sent: Monday, March 08, 2010 6:47 PM
> Subject: Re: [Test-Equipment] 12 pin cinch jones - confirmation email
> 
> 
> >
> > Got it.  I'll write the check tonight Greg.  Thanks
> >
> > Larry
> > W0OGH
> >
> >
> >  -------------- Original message from "Greg Mijal" 
> > : --------------
> >
> >
> >> Hi Larry:
> >>
> >> Good to hear from you.
> >> Please send your check or money order to:
> >>
> >> Greg Mijal
> >> 303 Wilson Ave.
> >> Kinston, NC 28501
> >> Please confirm this email and I will set one aside for you.
> >> Thanks
> >> Greg
> >> WA7LYO
> >> Kinston NC
> >> ----- Original Message ----- 
> >> From:
> >> To: "Discussion of Electronic Test Equipment"
> >>
> >> Sent: Monday, March 08, 2010 2:31 PM
> >> Subject: Re: [Test-Equipment] Fw: [Swan] FOR SALE: Cinch Jones 12
> >> pinconnectors- NOS Female/powercable side - 10 available
> >>
> >>
> >> >
> >> >
> >> > I'm going to need one of those Greg.  Hopefully my computer won't bomb 
> >> > out
> >> > this time.
> >> >
> >> > Larry
> >> > W0OGH
> >> >
> >> >
> >> >  -------------- Original message from "Greg Mijal"
> >> > : --------------
> >> >
> >> >
> >> >>
> >> >> ----- Original Message ----- 
> >> >> From: "Greg Mijal"
> >> >> To: "Discussion of equipment manufactured by Swan"
> >> >> Cc: ;
> >> >> Sent: Monday, March 08, 2010 11:13 AM
> >> >> Subject: [Swan] FOR SALE: Cinch Jones 12 pin connectors - NOS
> >> >> Female/powercable side - 10 available
> >> >>
> >> >>
> >> >> > For Sale:
> >> >> >
> >> >> > 12 pin Cinch Jones connector for Swans, Drakes and anything else 
> >> >> > that
> >> >> > uses
> >> >> > them.
> >> >> > This is the female connector for the power supply cable, not the 
> >> >> > male
> >> >> > radio side.
> >> >> > Unused and complete with hood, cable stay and locking pin.  Bright
> >> >> > metal
> >> >> > lugs for easy soldering.
> >> >> > Connectors fit snugly to the males and should end any intermittant
> >> >> > cable
> >> >> > problems you may be experiencing.
> >> >> >
> >> >> > Price: $7 each plus $3 shipping to the 48 continuous states.  All 
> >> >> > other
> >> >> > addresses:
> >> >> > $7.50 plus actual shipping charge.  Ships in padded envelope.
> >> >> > No discounts for multiple purchases but will combine shipping into 
> >> >> > one
> >> >> > price and one shipper.
> >> >> > If you want to buy please email me a confirmation statement and I 
> >> >> > will
> >> >> > give you my mailing address for payment.
> >> >> > Money orders orpersonal checks accepted. No Paypal please.
> >> >> > First come, first served.
> >> >> > Thank you
> >> >> > Greg
> >> >> > WA7LYO
> >> >> > Kinston NC
> >> >> >
> >> >> > ______________________________________________________________
> >> >> > Swan mailing list
> >> >> > Home: http://mailman.qth.net/mailman/listinfo/swan
> >> >> > Help: http://mailman.qth.net/mmfaq.htm
> >> >> > Post: mailto:Swan at mailman.qth.net
> >> >> >
> >> >> > This list hosted by: http://www.qsl.net
> >> >> > Please help support this email list: http://www.qsl.net/donate.html
> >> >>
> >> >> ______________________________________________________________
> >> >> Test-Equipment mailing list
> >> >> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> >> >> Help: http://mailman.qth.net/mmfaq.htm
> >> >> Post: mailto:Test-Equipment at mailman.qth.net
> >> >>
> >> >> This list hosted by: http://www.qsl.net
> >> >> Please help support this email list: http://www.qsl.net/donate.html
> >> > ______________________________________________________________
> >> > Test-Equipment mailing list
> >> > Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> >> > Help: http://mailman.qth.net/mmfaq.htm
> >> > Post: mailto:Test-Equipment at mailman.qth.net
> >> >
> >> > This list hosted by: http://www.qsl.net
> >> > Please help support this email list: http://www.qsl.net/donate.html
> >> >
> >>
> >> ______________________________________________________________
> >> Test-Equipment mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Test-Equipment at mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> > ______________________________________________________________
> > Test-Equipment mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Test-Equipment at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > 
> 
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

From mrmanes at gmail.com  Wed Mar 10 00:44:21 2010
From: mrmanes at gmail.com (Mike Manes)
Date: Tue, 09 Mar 2010 22:44:21 -0700
Subject: [Test-Equipment] Looking for manual for HP-8654A
In-Reply-To: <4B96E343.4050101@ec.rr.com>
References: <SNT127-W374969A15F476885831AE7FB360@phx.gbl>	<000a01cabe65$b4b58610$6501a8c0@ingrnet.com>	<855898CEE9064193B78D593D6CC8DACD@AWPLAP>	<4B95EB7D.30602@gmail.com>
	<4B96E343.4050101@ec.rr.com>
Message-ID: <4B9731B5.9030601@gmail.com>

Hi Al,

Can't say, since I've not been that route with them. But they're good
about answering emails, so GA es ask 'em.  The scans, including B & C-size
schematics, are all easily readable .pdfs.  I'd personally prefer hard
copy, but IMHO, the savings in cost and book shelf space are a decent
trade.

73 de Mike W5VSI

On 3/9/2010 17:09, Al Parker wrote:
> hi Mike,
>       Can they scan  an original without destroying the binding?  I'm not
> interested in selling, but would loan if they're "nice" to them.
> 73,
> Al
>
> On 3/9/2010 1:32 AM, Mike Manes wrote:
>> Hi Al,
>>
>> You might consider loaning your copy to ArtekMedia.com.  They'll
>> give you 2 freebie CDs of their high rez scans and send the original
>> back to you.  They also buy good-quality manuals. The 8645A isn't on
>> their wish list, but it may be worth a shot.
>>
>> I'm just a satisfied 2x customer.  A good quality .pdf of a manual for
>> under $10 is a great deal if you can't get the real thing inside your
>> budget.
>>
>> 73 de Mike W5VSI
>>
>> On 3/8/2010 06:29, Al Parker wrote:
>>
>>> Hi Barry,
>>>        IF you don't find anything helpful, I have an orig. manual for my
>>> HP-8654B, and will look up anything I can for you.  Might be able to scan
>>> some if it can be opened up without breaking the spine.  Also have then for
>>> the 8655A&    11710B.
>>>        Hope you're getting some warmer wx down there these days, it's supposed
>>> to hit 60 hr today, finally.
>>> 73,
>>> Al, W8UT
>>> New Bern, NC
>>> www.boatanchors.org
>>> www.hammalund.info
>>>
>>> "there is nothing -absolutely nothing- half as much worth doing as
>>>     simply messing about in boats."
>>>       Ratty, to Mole
>>>
>>>
>>> ----- Original Message -----
>>> From: "Barry"<n4buq at knology.net>
>>> To:<test-equipment at mailman.qth.net>
>>> Sent: Sunday, March 07, 2010 9:18 PM
>>> Subject: [Test-Equipment] Looking for manual for HP-8654A
>>>
>>>
>>>
>>>> Anyone know of an online source for a manal for an HP-8654A?
>>>>
>>>> Thanks,
>>>> Barry - N4BUQ
>>>> ______________________________________________________________
>>>> Test-Equipment mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Test-Equipment at mailman.qth.net
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>
>>> ______________________________________________________________
>>> Test-Equipment mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Test-Equipment at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>>
>>
>>
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 8.5.436 / Virus Database: 271.1.1/2732 - Release Date: 03/09/10 07:33:00
>>
>>
>

-- 
Mike Manes    mrmanes at gmail.com     Tel: 303-979-4899
"Things should be made as simple as possible, but not more so."
A. Einstein

From mrmanes at gmail.com  Wed Mar 10 00:51:28 2010
From: mrmanes at gmail.com (Mike Manes)
Date: Tue, 09 Mar 2010 22:51:28 -0700
Subject: [Test-Equipment] Looking for manual for HP-8654A
In-Reply-To: <001601cabff0$7773e260$6501a8c0@ingrnet.com>
References: <SNT127-W374969A15F476885831AE7FB360@phx.gbl>	<000a01cabe65$b4b58610$6501a8c0@ingrnet.com><855898CEE9064193B78D593D6CC8DACD@AWPLAP>	<4B95EB7D.30602@gmail.com>
	<001601cabff0$7773e260$6501a8c0@ingrnet.com>
Message-ID: <4B973360.3080804@gmail.com>

Hi Barry,
Just checked their HP list at:
http://artekmed.startlogic.com/page3.html
and the 8654 didn't show up. Old listing, maybe?
Anyway, the fella looking for that manual may want to know that.
73 de Mike W5VSI

On 3/9/2010 18:24, Barry wrote:
>> Hi Al,
>>
>> You might consider loaning your copy to ArtekMedia.com.  They'll
>> give you 2 freebie CDs of their high rez scans and send the original
>> back to you.  They also buy good-quality manuals. The 8645A isn't on
>> their wish list, but it may be worth a shot.
>>
>> I'm just a satisfied 2x customer.  A good quality .pdf of a manual for
>> under $10 is a great deal if you can't get the real thing inside your
>> budget.
>>
>> 73 de Mike W5VSI
>
> ArtekMedia already has the manual.
> 73,
> Barry - N4BUQ
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

-- 
Mike Manes    mrmanes at gmail.com     Tel: 303-979-4899
"Things should be made as simple as possible, but not more so."
A. Einstein

From n4buq at knology.net  Wed Mar 10 09:26:32 2010
From: n4buq at knology.net (Barry)
Date: Wed, 10 Mar 2010 09:26:32 -0500
Subject: [Test-Equipment] Looking for manual for HP-8654A
Message-ID: <4388.1268231192@knology.net>

> Hi Barry,
> Just checked their HP list at:
> http://artekmed.startlogic.com/page3.htmland the 8654 didn't show up. Old listing, maybe?
> Anyway, the fella looking for that manual may want to know that.
> 73 de Mike W5VSI

I have email from Dave at ArtekMedia and he has the manual but hasn't scanned it yet.  I suppose that's 
why it isn't on the list.

73,
Barry - N4BUQ


From anchor at ec.rr.com  Wed Mar 10 10:11:49 2010
From: anchor at ec.rr.com (Al Parker)
Date: Wed, 10 Mar 2010 10:11:49 -0500
Subject: [Test-Equipment] Looking for manual for HP-8654A
In-Reply-To: <4388.1268231192@knology.net>
References: <4388.1268231192@knology.net>
Message-ID: <4B97B6B5.7040009@ec.rr.com>

Maybe he'd still be interested in the 8655A (synchronizer/counter) & 
11710B (down convertor)  manuals?  They're very desirable, but not 
always found, units to use with the 8654.
     I've just sent them an email.

Al, W8UT
New Bern, NC
www.boatanchors.org
www.hammarlund.info

"there is nothing -absolutely nothing- half as much worth doing as  
simply messing about in boats."
   Ratty, to Mole




On 3/10/2010 9:26 AM, Barry wrote:
>> Hi Barry,
>> Just checked their HP list at:
>> http://artekmed.startlogic.com/page3.htmland the 8654 didn't show up. Old listing, maybe?
>> Anyway, the fella looking for that manual may want to know that.
>> 73 de Mike W5VSI
>>      
> I have email from Dave at ArtekMedia and he has the manual but hasn't scanned it yet.  I suppose that's
> why it isn't on the list.
>
> 73,
> Barry - N4BUQ
>    

-- 



From davec2468 at aim.com  Wed Mar 10 17:52:48 2010
From: davec2468 at aim.com (DaveC)
Date: Wed, 10 Mar 2010 14:52:48 -0800
Subject: [Test-Equipment] ESR meter
In-Reply-To: <43744CFCA8894B5CA0262F111E99D8A7@dell>
References: <4B6893AA.80000@pacific.net><456413.9460.qm@web50404.mail.re2.yahoo.com>
	<p06240878c78f8ec8862f@[192.168.1.68]>
	<43744CFCA8894B5CA0262F111E99D8A7@dell>
Message-ID: <p0624080cc7bdd03fb378@[192.168.1.68]>

Searching e-Pain:
LC-75: $192 and still going
LC-102: $695, no bids yet

Would like to find one at a reasonable price...

Dave

-=-=-=-

>if you guys want a good ESR/cap/ringer inductor tester     get one of the
>sencore LC series have used one for yrs and they are the best thing I have
>ever laid my hands on. not gonna get one for 50.00 but about 125.00 on eBay
>is a reasonable expectation. have tried many types of cap testers and that
>one wins by a mile. seems to be a little known secret though. think there is
>an LC-90, LC-75 and an LC-100 models  does voltage breakdown testing as well
>
>
>
>----- Original Message -----
>From: "DaveC" <davec2468 at aim.com>
>To: "Discussion of Electronic Test Equipment"
><test-equipment at mailman.qth.net>
>Sent: Wednesday, February 03, 2010 3:38 PM
>Subject: Re: [Test-Equipment] Should I Import this ESR Meter?
>
>
>>  How about: because the Russian one tests capacitance as well as ESR?
>>
>>  That makes it quite appealing.
>>
>>  And cheaper than 2 separate meters, by a mile.
>>
>  > Dave

From jeide at execpc.com  Wed Mar 10 21:34:10 2010
From: jeide at execpc.com (Joe Eide)
Date: Wed, 10 Mar 2010 20:34:10 -0600
Subject: [Test-Equipment] ESR meter
In-Reply-To: <p0624080cc7bdd03fb378@[192.168.1.68]>
References: <4B6893AA.80000@pacific.net><456413.9460.qm@web50404.mail.re2.yahoo.com>	<p06240878c78f8ec8862f@[192.168.1.68]>	<43744CFCA8894B5CA0262F111E99D8A7@dell>
	<p0624080cc7bdd03fb378@[192.168.1.68]>
Message-ID: <4B9856A2.2020800@execpc.com>

Hi Dave,

Have you considered something like the Capacitor Wizard?  It is an 
analog meter and only does ESR so you would still need an LCR meter to 
read values.
Maybe not as handy as an all in one, but sometimes seperates have their 
place.  Actually, I sometimes have to use 3 units to check esr, value, 
and leakage at higher voltage.

Joe - KB9R

DaveC wrote:
> Searching e-Pain:
> LC-75: $192 and still going
> LC-102: $695, no bids yet
>
> Would like to find one at a reasonable price...
>
> Dave
>
> -=-=-=-
>
>   
>> if you guys want a good ESR/cap/ringer inductor tester     get one of the
>> sencore LC series have used one for yrs and they are the best thing I have
>> ever laid my hands on. not gonna get one for 50.00 but about 125.00 on eBay
>> is a reasonable expectation. have tried many types of cap testers and that
>> one wins by a mile. seems to be a little known secret though. think there is
>> an LC-90, LC-75 and an LC-100 models  does voltage breakdown testing as well
>>
>>
>>
>> ----- Original Message -----
>> From: "DaveC" <davec2468 at aim.com>
>> To: "Discussion of Electronic Test Equipment"
>> <test-equipment at mailman.qth.net>
>> Sent: Wednesday, February 03, 2010 3:38 PM
>> Subject: Re: [Test-Equipment] Should I Import this ESR Meter?
>>
>>
>>     
>>>  How about: because the Russian one tests capacitance as well as ESR?
>>>
>>>  That makes it quite appealing.
>>>
>>>  And cheaper than 2 separate meters, by a mile.
>>>
>>>       
>>  > Dave
>>     
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>   

From w2hx at w2hx.com  Wed Mar 10 21:50:14 2010
From: w2hx at w2hx.com (W2HX)
Date: Wed, 10 Mar 2010 21:50:14 -0500
Subject: [Test-Equipment] ESR meter
In-Reply-To: <4B9856A2.2020800@execpc.com>
References: <4B6893AA.80000@pacific.net><456413.9460.qm@web50404.mail.re2.yahoo.com>
	<p06240878c78f8ec8862f@[192.168.1.68]>
	<43744CFCA8894B5CA0262F111E99D8A7@dell>
	<p0624080cc7bdd03fb378@[192.168.1.68]> <4B9856A2.2020800@execpc.com>
Message-ID: <002601cac0c5$96b42880$c41c7980$@com>

I have the sencore LC-53. Works fine. Paid about $150 or so IIRC. No ESR.
But I just ordered a new ESR product imported by Brooke Clarke. It reads C
and ESR simultaneously from what I understand. Hasn't arrived in the mail
yet. But I'll report back once it arrives

73 Eugene W2HX


-----Original Message-----
From: test-equipment-bounces at mailman.qth.net
[mailto:test-equipment-bounces at mailman.qth.net] On Behalf Of Joe Eide
Sent: Wednesday, March 10, 2010 9:34 PM
To: Discussion of Electronic Test Equipment
Subject: Re: [Test-Equipment] ESR meter

Hi Dave,

Have you considered something like the Capacitor Wizard?  It is an 
analog meter and only does ESR so you would still need an LCR meter to 
read values.
Maybe not as handy as an all in one, but sometimes seperates have their 
place.  Actually, I sometimes have to use 3 units to check esr, value, 
and leakage at higher voltage.

Joe - KB9R

DaveC wrote:
> Searching e-Pain:
> LC-75: $192 and still going
> LC-102: $695, no bids yet
>
> Would like to find one at a reasonable price...
>
> Dave
>
> -=-=-=-
>
>   
>> if you guys want a good ESR/cap/ringer inductor tester     get one of the
>> sencore LC series have used one for yrs and they are the best thing I
have
>> ever laid my hands on. not gonna get one for 50.00 but about 125.00 on
eBay
>> is a reasonable expectation. have tried many types of cap testers and
that
>> one wins by a mile. seems to be a little known secret though. think there
is
>> an LC-90, LC-75 and an LC-100 models  does voltage breakdown testing as
well
>>
>>
>>
>> ----- Original Message -----
>> From: "DaveC" <davec2468 at aim.com>
>> To: "Discussion of Electronic Test Equipment"
>> <test-equipment at mailman.qth.net>
>> Sent: Wednesday, February 03, 2010 3:38 PM
>> Subject: Re: [Test-Equipment] Should I Import this ESR Meter?
>>
>>
>>     
>>>  How about: because the Russian one tests capacitance as well as ESR?
>>>
>>>  That makes it quite appealing.
>>>
>>>  And cheaper than 2 separate meters, by a mile.
>>>
>>>       
>>  > Dave
>>     
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>   
______________________________________________________________
Test-Equipment mailing list
Home: http://mailman.qth.net/mailman/listinfo/test-equipment
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Test-Equipment at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



From davec2468 at aim.com  Thu Mar 11 11:26:10 2010
From: davec2468 at aim.com (DaveC)
Date: Thu, 11 Mar 2010 08:26:10 -0800
Subject: [Test-Equipment] ESR meter
In-Reply-To: <002601cac0c5$96b42880$c41c7980$@com>
References: <4B6893AA.80000@pacific.net><456413.9460.qm@web50404.mail.re2.yahoo.com>
	<p06240878c78f8ec8862f@[192.168.1.68]>
	<43744CFCA8894B5CA0262F111E99D8A7@dell>
	<p0624080cc7bdd03fb378@[192.168.1.68]> <4B9856A2.2020800@execpc.com>
	<002601cac0c5$96b42880$c41c7980$@com>
Message-ID: <p06240819c7bec9dc341e@[192.168.1.68]>

That's the Russian-made one discussed here before (I think it was 
this list... or TekScopes...):

<http://www.prc68.com/I/ESRmicro.shtml>

Dave

-=-=-=-

>I have the sencore LC-53. Works fine. Paid about $150 or so IIRC. No ESR.
>But I just ordered a new ESR product imported by Brooke Clarke. It reads C
>and ESR simultaneously from what I understand. Hasn't arrived in the mail
>yet. But I'll report back once it arrives
>
>73 Eugene W2HX

From bill.riches at verizon.net  Thu Mar 11 21:22:41 2010
From: bill.riches at verizon.net (Bill Riches)
Date: Thu, 11 Mar 2010 21:22:41 -0500
Subject: [Test-Equipment] 10554A
Message-ID: <00bc01cac18a$e460b0b0$ad221210$@riches@verizon.net>

The saga continues!!...

 

Anyone have a 10544a that has a good heater controller and a bad osc that
that they wish to part with?  Please give me a shout if you do.  I have
replaced all of the semiconductors and op amp but still will not fire up.  I
must be missing something!

 

73,

 

Bill, WA2DVU

 


From phiL at ocmdevon.demon.co.uk  Fri Mar 12 05:17:37 2010
From: phiL at ocmdevon.demon.co.uk (Phil Parsons)
Date: Fri, 12 Mar 2010 10:17:37 -0000
Subject: [Test-Equipment] RTV  141T CRT
Message-ID: <0401EE3626234F579303D6E0ED2FE556@mainoffice>

I had a problem with a 17xx scope arcing where the HT cable was delaminating. I used a general purpose glue (UHU actually) to glue the layers back together. Lots of weight to ensure no small air gaps between conductors.
Problem solved after 24 hrs drying time.
May be of help to someone?

Phil

From k0ewu9 at juno.com  Sat Mar 13 11:34:26 2010
From: k0ewu9 at juno.com (K0EWU9)
Date: Sat, 13 Mar 2010 10:34:26 -0600
Subject: [Test-Equipment] HP141B
Message-ID: <20100313.083439.994.37392@mailpop01.dca.untd.com>


hhi all, what is the 141B, difference from the 141T?
jack
____________________________________________________________
Nutrition
Improve your career health. Click now to study nutrition!
http://thirdpartyoffers.juno.com/TGL2141/c?cp=oC9gTUNTSPWvtBus2N3kowAAJ1AmMEKPTVQY-SXbGjk4roFnAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAASQwAAAAA=

From eb5agv at amsat.org  Sat Mar 13 12:26:12 2010
From: eb5agv at amsat.org (Jose V. Gavila)
Date: Sat, 13 Mar 2010 18:26:12 +0100
Subject: [Test-Equipment] HP141B
In-Reply-To: <20100313.083439.994.37392@mailpop01.dca.untd.com>
References: <20100313.083439.994.37392@mailpop01.dca.untd.com>
Message-ID: <4b9bcab7.5124cc0a.11ed.ffff98f7@mx.google.com>

Hi Jack,

>hi all, what is the 141B, difference from the 141T?
>jack

Mainly that the 141B was not intended for spectrum analyzer use, so 
it lacks the rear panel coaxial connectors. I have a 141A (an older, 
round tube unit) with an 8554B, which has all the coax outputs on the 
front panel, so it works fine in this mainframe.

Best regards,

JOSE
--
73 EB5AGV - JOSE V. GAVILA - IM99sm La Canyada - Valencia(SPAIN)
Vintage Radio and Test Equipment........... http://jvgavila.com
RadioRepair BLOG............... http://radiorepair.blogspot.com


From alan.melia at btinternet.com  Sat Mar 13 18:35:43 2010
From: alan.melia at btinternet.com (ALAN MELIA)
Date: Sat, 13 Mar 2010 23:35:43 +0000 (GMT)
Subject: [Test-Equipment] Test-Equipment Digest, Vol 71, Issue 15
In-Reply-To: <mailman.89.1268499632.18475.test-equipment@mailman.qth.net>
Message-ID: <431185.46813.qm@web86503.mail.ird.yahoo.com>

>From memory Jack the HP141T is a mesh storage (or variable persistence ) tube frame, and the HP141B is a conventional CRT (non-storage)

Alan G3NYK

--- On Sat, 13/3/10, test-equipment-request at mailman.qth.net <test-equipment-request at mailman.qth.net> wrote:

> From: test-equipment-request at mailman.qth.net <test-equipment-request at mailman.qth.net>
> Subject: Test-Equipment Digest, Vol 71, Issue 15
> To: test-equipment at mailman.qth.net
> Date: Saturday, 13 March, 2010, 17:00
> Send Test-Equipment mailing list
> submissions to
> ??? test-equipment at mailman.qth.net
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> ??? http://mailman.qth.net/mailman/listinfo/test-equipment
> or, via email, send a message with subject or body 'help'
> to
> ??? test-equipment-request at mailman.qth.net
> 
> You can reach the person managing the list at
> ??? test-equipment-owner at mailman.qth.net
> 
> When replying, please edit your Subject line so it is more
> specific
> than "Re: Contents of Test-Equipment digest..."
> 
> 
> Today's Topics:
> 
> ???1. HP141B (K0EWU9)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Sat, 13 Mar 2010 10:34:26 -0600
> From: K0EWU9 <k0ewu9 at juno.com>
> Subject: [Test-Equipment] HP141B
> To: test-equipment at mailman.qth.net
> Message-ID: <20100313.083439.994.37392 at mailpop01.dca.untd.com>
> Content-Type: text/plain; charset=us-ascii
> 
> 
> hhi all, what is the 141B, difference from the 141T?
> jack
> ____________________________________________________________
> Nutrition
> Improve your career health. Click now to study nutrition!
> http://thirdpartyoffers.juno.com/TGL2141/c?cp=oC9gTUNTSPWvtBus2N3kowAAJ1AmMEKPTVQY-SXbGjk4roFnAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAASQwAAAAA=
> 
> 
> ------------------------------
> 
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Test-Equipment at mailman.qth.net
> 
> 
> End of Test-Equipment Digest, Vol 71, Issue 15
> **********************************************
> 

From w7ksg at q.com  Tue Mar 16 18:00:02 2010
From: w7ksg at q.com (J ALLEN CALL)
Date: Tue, 16 Mar 2010 22:00:02 +0000
Subject: [Test-Equipment] FS: Panel meters
Message-ID: <SNT127-W1C6E60C9DF5D12B8B3AB0FB2D0@phx.gbl>


The subject line says it all.  Most are $19.95 some lower.  Inquire the price for specific

meters.

 

1- Simpson 0-200 DC Microamperes. 4-1/4 x 3-1/4. Mounts in a 2-3/4 round hole. Grey bakelite case. 

1- Weston 0-1000MA DC volt meter. 3-1/2 inch round. Mounts in a 2-3/4 inch round hole. 

1- Simpson 0-3 VOLTS AC 2-3/8 square. Mounts in a 2-1/8 round hole. Black bakelite. 

1-Simpson 0-5 volts DC volt. 1-3/4 inches square. Mount in a 1-1/2 round hole 

1-Simpson 0-10 dc and 0-50dc volts. Dual scale. Selectable. 2-1/2 square. Mounts in a 2 inch hole. 

1- Simpson 0-1A DC ampere meter. 3 inch square. Mount in a 2-3/4 round hole. Black bakelite.

1-Simpson 0-100DC microampere meter. 2/3/4 x 2-1/2. Mounts in a 2-1/8 round hole.

1- Triplet 0-200DC microamperes . Round 3-1/2 inch 2-3/4 round mounting hole. Black bakelite. 

1- Simpson 0-100DC milliampere 3-3/16 square Plastic face. Mounts in a 2-3/4 inch hole. 

1-API 0-10 DC millivolt meter . 4-1/4 wide x 4 inches high. Black bakelite. Mounts in a 2-3/4 inch round hole. 

2- International Instruments 0-100 maM DC Model 150C. 1-5/8 inchs round. Mounts in a round 1-3/8 inch hole. With mounting hardware.

 

1-Simpson DC 0-150ma. DC 2-3/8 square. Mounts in a 2-1/8 round hole. Black bakelite.  7A

1-Phastron 0-1ma. DC 2-5/8 round sealed meter. Mounts ins 2-1/3 inch round hole. Black metal face. Box 7A

1-Simpson 0-10 AC Volts. 3-1/4 square. Plastic cover. Mount in a 2-3/4 inch round hole. Box 7A

1-Weston 0-3KV DC meter. 3 inches square. Mounts in a 2-3/4 inch round hole. 1000 ohms/per volt. Black bakeliete Box 7A

1-Weston 0-5 ma DC Meter. 3 inches square. Mounts in a 2-3/4 inch round hole.Black bakelite Box 7A

1-Weston 0-800ma DC meter. 3 inches square. Mounts in a 2-3/4 inch round hole. Black bakelite. Box 7A.

1-Honeywell 0-10 DC Amps. 3 inches square. Mounts in a 2-3/4 inch round hole. Black bakelite. Box 7A.

1-Haeco 0-100 DC MA. 4 inches x 3-1/2 inches. Mounts in a 2-3/4 inch round hole. Black bakelite. 1/2 plastic 1/2 black face. Box 7A.

1-General Electric hour timer. 0-10,000 hours. 120VAC 3-1/2 round face. Needs 3-1/2 inches mounting space in read. Box 7A.

2-Electro-Mech 0-10 DC Ma. Horizontal edgewise 2 inches wide x 3/4 inchs high. With mounting enclosure and leads. Box 7A.

1-Honeywell 0-1 DC Ma. Silvered scale. 5 inches wide x 3 inches high. Mounts in a 2-1/4 inch round hole. Box 7A

1-AIC DC Voltmeter. 0-5000VDC. Oval meter. 4-1/2 inches wide x 3-1/2 inches high. Box 7A.

1-Simpson 0-200 DC Ma. 4-3/4 wide x 4-1/4 inch wide. Black plastic. 3-3/4 inch mounting hole. Box 7A.

1-Shurite 0-10DCA. Horizontal edgwise meter 2 inches wide x 1/2 inch high. Extends 2 inches beyond mounting ears. Box 7A.

1-TME 0-750 DCMA. 3 inches square . Mounts in a 2-3/4 inch round hole. Black plastic case. Box 7A

1-Burlington 0-30VDC 2-3/4 round meter. Mounts in a 2-1/8 round hole. Black bakelite case. Box 7A

1-Vaculine 0-150VAC 2-5/8 round sealed meter. Mounts in a 2 inch round hole. Black face. Box 7A

1-General Electric 0-15VAC 3 inch square black bakelite case. Mounts in a 2-3/4 inch round hole. Box 7A

1-Simpson 0-250 DC MA 3 inch square black bakeline case. Mounts in a 2-3/4 inch round hole. Box 7A

1-Simpson 50-0-50 Microampere meter. Has Motorola name. 2-3/8 square black bakelite.2-1/8 mounting hole. Box 7a

1-Triplett 0-150VAC meter. 2-3/8 square black bakelinte. 2-1/8 mounting hole. Box 7A

1-General Electric 0-500 DC MA. 2-1/2 inch round. Black face . Mounts 2 inch round hole. Box 7A

1-Simpson 0-50 DC microamperes. 2-5/8 x 2-1/4. Mounts in 2 inch hole.. Box 7A

1-Simpson 25-0-25 DC Microamperes 3 inch square. Mounts in 2-3/4 round hole. Black bakelite. Box 7A

1-General Electric 250-0-250 DC ma. 2-3/4 x 2-1/8. Plastic face. Mounts in a 2 inch round hole. Box 7A

1-Simpson 0-10 DC microamperes 2-1/2 inch square. Plastic face. Mounts in a 2-1/8 inch hole Box 7A

1-General Electric 0-300 DC Volt meter. 2-1/2 inch square. Plastic face. Mounts in a 2 inch round hole. Box 7A

1-General Electric 0-80 DC Volts. 2-1/2 inch square. Plastic face Mounts in a 2 inch round hole. Box 7A

1-General Electric 0-8 RF Ampere meter. 2-1/2 inches round. Mounts in a 2 inch hole. Black bakelite black face. Box 7A.

1-Western Electric 0-3DC Ma. 3 inches round. Mounts in 2-3/4 inch round hole. Black face. Box 7A.

1-Simpson 0-50 DC volts 3 inches square. 2-3/4 round mounting hole. Black bakelite. Box 7A

1-Weston model 306. FS 90ua. calibrated from 1-1000megohms. Round 2-1/2 inch Black metal case. Box 7A.

1-Westinghouse Decibel meter. -10-0 +5. 2-1/2 inch black round. Mounts 2 inch hole Navy CAY-27152 600 ohms at 1000hz Box 7A.

1-Burlington DC Ampere meter 0-10A. 2-3/4 inch round. Mount hole 2 inch. Black bakelite. Box 7A

1-Weston DC Microamperes 0-20uA. 3 inch square 2-3/4 mounting hole. Model 301 Black bakelite. Box 7A

1-Roller Smith DC A 0-50 round 2-3/4 inches mounts in a 2-1/8 hole. Black sealed meter. Box 7a

1-Roller Smith DC volt meter 0-50 round 2-3/4 mounts ina 2-1/8 hole Black sealed meter, Box 7A

1-Weston DC ma meter 0-100ma. 3-1/2 inch round mounts in a 2-3/4 inch hold Black bakelite. cracked case. Box 7A

1-General Electric/KEPCO DC Volts 0-400 2-1/2 inch square. 2 inch mounting hole. Plastic face. Box 7A

1-Vacline DC volts 0-50VDC 2-3/4 round mounts in a 2 inch round hole. Sealed meter Black Box 7A

1-EIMAC DC Kilovolt meter 0-2.5KV. 3-1/2 x 3-1/8 mirror scale. mounts in2-3/4 round hold Black plastic. 500ua FS. Requires shunt. Box 7A 

1-Simpson DC Volts 10-14VDC 3-1/4 square. Mounts 2-3/4 round hole. Black plastic face. Box 7A 

1-Burlington AC volts 0-500VAC. 3 inch square. mounts in a 2-3/4 inch hole. Black bakelite. Box 7A

1-Weston model 3531 0-1 DC amperes. Sealed meter 3 inch black round. Mounts in 2-3/4 inch round hole. Box 7A

1-Triplett 0-15AC volts. 4-3/4 wide x 4-1/4 high. Plastic lense. 2-2/4 inch round mtg hole. Box 7A

1-Weston 0-50VDC 2-1/2 inch round black sealed meter. Mounts 2 inch round hole. Box 7A

1-General Electric 0-500DC MA. 3-1/2 round 2-3/4 mounting hole. Black bakelite. Box 7A

1-Vaculine 0-50VDC. 2-5/8 round black sealed. Mounts in a 2 inch round hole. Box 7A.

1-Simpson 0-1000 DCAmps. Plastic face. Use with external shunt. 6 inches wide 4-3/4 high. FS 25mv. Box 7A

1- Weston 0-500 AC amperes. 3-3/4 round sealed meter Mounts in a 2-3/4 round hole Black bakelite. FS 5 amps Box 7A

1- Weston 500-0-500 DC microamperes 3-1/2 inch round Black bakelite Model 301. Box 7A

1- Simpson Decibel meter 0-20 (-) 0-6 (+) rectifier type. 2-3/4 square black bakelite. Box 7A

1- Westinghouse (Motorola) 0-50 DCmicroamperes. 4-1/4 square. Black bakelite. 4 inch round mounting.. Box 7A

1-Triplett DC Volts 0-15 or 0-150 selectable. 4-1/2 wide 4inches high. plastic lense 1000 ohms per volt. Box 7A.

1-Modutec DCma 25-0-25 5 inches wide 4 inches high. Plastic lense. Box 7A

1-General Electric AC ampere meter 0-800 amps 5-1/4 wide 41/4 high. Plastic lense. Box 7A

1-Weston AC Volts 0-75 volts, 2-1/4 round. Black metal. 1-3/4 deep. Mounts 2 inch round hole. Box 7A

1-Simpson DB meter -15-0+6 DB 6 milliwatts 500 ohms. 5000ohm FS. 3 inch square black bakelite 2-3/4 mounting hole. Box 7A.

1-Weston 0-2-DCma. 3-3/8 inch round black bakelite. Mounts in a 2-3/4 inch round hole. Box 7A

1-Phastron 0-1DC ma.4-58inch x 4-1/8 inch Black metal. Mirror scale 2-5/8 inch round hole. Box 7A

1-Frahm frequency meter. 3 inch square 110-150VAC input reads 380-420 cycles. Black bakelite mounts 2-3/4 hole. Box 7A

1-Gar 100-0-100 DCma 3-3/16 inch round black metal sealed meter. Mounts 2-1/2 round hole. Box 

1-Triplett 0-50DC Volts. 2-3/8 square black bakelite. Mounts 2 inch round hole. Box 7A. 

1-Ballentine top scale 1-10VAC bottom scale 0-20DB. 4-1/4 x 3-3/4. Black bakelite. Mounts in 3-1/8 round hole. Box 7A.

1-Marion Instrument Hour meter. Reads to 10,000 hours. 2-3/4 inch round. 2-1/2 deep. Black. Present reading 382 hours. 7A.

1-Jewell 0-15 DCma. 1-3/4 inch Plastic face. Mounts in a 1-3/8 inch round hole. Box 7A

1-Honeywell 0-50Vdc. 3 inch square 1ma FS. Use external shunt. 2-3/4 inch mounting hole. Black bakelite. 7A.

1-Weston DBM meter. Bottom scale - DBM R/L 0-infinity. Top scale L/R +DBM 0-6. Int lamps #47.4-/1/4 x 4 inch. 3-1/8 mount 7A.

1-Weston 0-250VAC 3-1/2 round black bakelite. Mounts 2-3/4 round hole. Model 476. Box 7A

1-Honewell VU meter bottom scale 0-100VU. Top scale -20 to +3VU. Gold case 2-3/4 x 2-3/4 rounded top. Box 7A

1-Simpson 0-1000DC Amps. 3 inch square. Mounts in a 2-3/4 inch round hole. Black bakelite FS 50mv. Box 7A

1-Westinghouse0-150DCma. 3 inch square Black bakelite. Mounts 2-3/4 inch round hole. Box 7A

1-Weston Model 506 0-1DCma. 2-1/2 black round metal. Mounts in a 2 inch round hole. Box 7A

1-Jewell 0-300DCma4-1/2 round black metal sealed meter. mounts in a 2 inch round hole.

1-Triplett 0-5VDC. Model 420. 4-1/2 inches wide x 4 inches high. Black bakelite 50uaFS use ext shunt 97K. Box 7A

1-Parker Instrument 0-60VDC. Oval top mirror scale 3-1/2 x 3-1/2. 1/2 inch thick. Box 7A

1-Simpson 150-0-150 DCma 3-1/2 round meter. 2-3/4 round mounting hole black bakelite. Box 7A

1-Modutec 0-300DCma meter. 5 inches wide 4 inches high. Plastic face. Mounts 2-1/2 round hole. 7A.

1-Modutec 0-1DCma. 2-1/4 inches wide x 1-3/4 inches high. Plastic face. Mounts in a 1-1/2 round hole. Box 7A.

?

?

J

W7KSG


 


 		 	   		  

From bill.riches at verizon.net  Thu Mar 18 10:32:20 2010
From: bill.riches at verizon.net (Bill Riches)
Date: Thu, 18 Mar 2010 10:32:20 -0400
Subject: [Test-Equipment] SCHEMATIC FOR HP 05328-20027 BOARD
Message-ID: <002d01cac6a7$d1435790$73ca06b0$@riches@verizon.net>

Anyone Have a schematic for the 05328-20027 board that the 10 mhz osc plugs
into for a 5328A counter that they can share?  This is the board that has 4
ics and fx adjust pot - not the board with one ic .

 

73,

 

Bill Riches WA2DVU

Cape May, NJ


From josepho at shaw.ca  Sun Mar 21 14:12:43 2010
From: josepho at shaw.ca (Joseph Orgnero)
Date: Sun, 21 Mar 2010 11:12:43 -0700
Subject: [Test-Equipment] FS pots & dials
Message-ID: <15351205039A40DD90B833F42D702ABD@OWNERM2R4RQDZL>

For sale. multiturn pots and dials .25" shaft 10 turns except as noted
Spectrol       10 K ohms            qty  2
IRC               5     "
IRC            100    "
TRW          125   "
Duncan        20    "
Bourns        10    "                   qty  3
Beckman    50    "                   3 turns
Any above  $ 2.00 each

Beckman Helipot  10 K ohms
     "            "       50     "           qty  2
    "             "     100     "
    "             "     100    "          double end shaft
Any above  $ 3.00

Multiturn dials
Beckman    100 div.     2" diam     qty   4     ea.  $  3.00
      "              "           1     "         "     4       "    $  2.00
      "        Duodial  100 div.   5" scale   2" spinner knob    qty.  2     ea.    $     12.00

Discounts on multiple units and pot/dial combinations

Above prices plus S&H

Thanks

Joe Orgnero  VE7LBI

From rbrucker3 at cox.net  Sun Mar 21 23:30:30 2010
From: rbrucker3 at cox.net (Robert and Nancy)
Date: Sun, 21 Mar 2010 20:30:30 -0700
Subject: [Test-Equipment] FS pots & dials
References: <15351205039A40DD90B833F42D702ABD@OWNERM2R4RQDZL>
Message-ID: <C8919DAFD78F49AABBAA8100639B080A@robert>

I will take the "Beckman 100 div. 2" diam qty   4ea.  $ 3.00. Robert W6LFO

----- Original Message ----- 
From: "Joseph Orgnero" <josepho at shaw.ca>
To: <Test-Equipment at mailman.qth.net>
Sent: Sunday, March 21, 2010 11:12 AM
Subject: [Test-Equipment] FS pots & dials


> For sale. multiturn pots and dials .25" shaft 10 turns except as noted
> Spectrol       10 K ohms            qty  2
> IRC               5     "
> IRC            100    "
> TRW          125   "
> Duncan        20    "
> Bourns        10    "                   qty  3
> Beckman    50    "                   3 turns
> Any above  $ 2.00 each
>
> Beckman Helipot  10 K ohms
>     "            "       50     "           qty  2
>    "             "     100     "
>    "             "     100    "          double end shaft
> Any above  $ 3.00
>
> Multiturn dials
> Beckman    100 div.     2" diam     qty   4     ea.  $  3.00
>      "              "           1     "         "     4       "    $  2.00
>      "        Duodial  100 div.   5" scale   2" spinner knob    qty.  2 
> ea.    $     12.00
>
> Discounts on multiple units and pot/dial combinations
>
> Above prices plus S&H
>
> Thanks
>
> Joe Orgnero  VE7LBI
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> __________ Information from ESET Smart Security, version of virus 
> signature database 4962 (20100321) __________
>
> The message was checked by ESET Smart Security.
>
> http://www.eset.com
>
>
> 


__________ Information from ESET Smart Security, version of virus signature database 4963 (20100321) __________

The message was checked by ESET Smart Security.

http://www.eset.com




From josepho at shaw.ca  Mon Mar 22 14:20:40 2010
From: josepho at shaw.ca (Joseph Orgnero)
Date: Mon, 22 Mar 2010 11:20:40 -0700
Subject: [Test-Equipment] FS pots & dials
References: <15351205039A40DD90B833F42D702ABD@OWNERM2R4RQDZL>
	<C8919DAFD78F49AABBAA8100639B080A@robert>
Message-ID: <17464CF799424357BF5054015B863FBC@OWNERM2R4RQDZL>

Sorry Robert, they have been sold.
Thank you for the reply.
Joe
----- Original Message ----- 
From: "Robert and Nancy" <rbrucker3 at cox.net>
To: "Discussion of Electronic Test Equipment" 
<test-equipment at mailman.qth.net>
Sent: Sunday, March 21, 2010 8:30 PM
Subject: Re: [Test-Equipment] FS pots & dials


>I will take the "Beckman 100 div. 2" diam qty   4ea.  $ 3.00. Robert W6LFO
>
> ----- Original Message ----- 
> From: "Joseph Orgnero" <josepho at shaw.ca>
> To: <Test-Equipment at mailman.qth.net>
> Sent: Sunday, March 21, 2010 11:12 AM
> Subject: [Test-Equipment] FS pots & dials
>
>
>> For sale. multiturn pots and dials .25" shaft 10 turns except as noted
>> Spectrol       10 K ohms            qty  2
>> IRC               5     "
>> IRC            100    "
>> TRW          125   "
>> Duncan        20    "
>> Bourns        10    "                   qty  3
>> Beckman    50    "                   3 turns
>> Any above  $ 2.00 each
>>
>> Beckman Helipot  10 K ohms
>>     "            "       50     "           qty  2
>>    "             "     100     "
>>    "             "     100    "          double end shaft
>> Any above  $ 3.00
>>
>> Multiturn dials
>> Beckman    100 div.     2" diam     qty   4     ea.  $  3.00
>>      "              "           1     "         "     4       "    $ 
>> 2.00
>>      "        Duodial  100 div.   5" scale   2" spinner knob    qty.  2
>> ea.    $     12.00
>>
>> Discounts on multiple units and pot/dial combinations
>>
>> Above prices plus S&H
>>
>> Thanks
>>
>> Joe Orgnero  VE7LBI
>> ______________________________________________________________
>> Test-Equipment mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Test-Equipment at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>> __________ Information from ESET Smart Security, version of virus
>> signature database 4962 (20100321) __________
>>
>> The message was checked by ESET Smart Security.
>>
>> http://www.eset.com
>>
>>
>>
>
>
> __________ Information from ESET Smart Security, version of virus 
> signature database 4963 (20100321) __________
>
> The message was checked by ESET Smart Security.
>
> http://www.eset.com
>
>
>
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 



From bonddaleena at aol.com  Sat Mar 27 18:17:30 2010
From: bonddaleena at aol.com (bonddaleena at aol.com)
Date: Sat, 27 Mar 2010 18:17:30 -0400
Subject: [Test-Equipment] VOM and gear for the HP 8640B
Message-ID: <8CC9C126CBF4E57-FDC-2273D@webmail-m046.sysops.aol.com>



Greetings, two topics.......

1.  I recently purchased a VOM on ePay, er, eBay that is pretty cool. I collect and restore VTVMs (yep, I ain't right), and this thing looked neat and had no bidders, so I got it for cheap. It was made by B&K and it's called a "V O Matic 360". It's nice because it has a beautiful, large mirrored meter. What surprised me, was that when you select a different 'range', a differently calibrated scale rotates into place. It cleaned up perfectly and works 100%.

I'm just wondering if any of you folks have one, or have ever used one????

2. Yesterday, I received the "combination" gear for the HP 8640B from the chap in Italy. I bought it as insurance, since my gear hasn't cracked (yet). The quality looks excellent and the postage was cheap, excellent seller by the way..... Just thought you'all would be interested.

tnx
ron
N4UE



From kk7iz at cox.net  Sat Mar 27 18:35:32 2010
From: kk7iz at cox.net (Lloyd Godsey)
Date: Sat, 27 Mar 2010 15:35:32 -0700
Subject: [Test-Equipment] VOM and gear for the HP 8640B
In-Reply-To: <8CC9C126CBF4E57-FDC-2273D@webmail-m046.sysops.aol.com>
References: <8CC9C126CBF4E57-FDC-2273D@webmail-m046.sysops.aol.com>
Message-ID: <15FE262E792046368D1D095CDAFADE23@LloydPC>

Ron
Congrats on a nice find. Many moons ago I had a 360. Went up in smoke when 
someone burned down the boat house. Nice little instrument. Manual is not on 
BAMA. Wish I help you more.
Thanx
Lloyd Godsey
kk7iz at cox.net
480-620-7145 


From WA5CAB at cs.com  Sat Mar 27 19:00:41 2010
From: WA5CAB at cs.com (WA5CAB at cs.com)
Date: Sat, 27 Mar 2010 19:00:41 EDT
Subject: [Test-Equipment] Wanted: TS-710/TSM Crystal Impedance Meter,
	Good or Parts
Message-ID: <2d7a3.3cef4c2d.38dfe819@cs.com>

Group,

I need a working TS-710 to test low freq FT-241 crystals used in the BC-604 
and BC-684 transmitters.  This is a rack mount unit with 5-1/4" tall panel. 
 I have one in relatively poor condition, missing at least knobs and 
cabinet, condition otherwise unknown.  I'm interest in acquiring anything between 
a known to work one to a known not to work one that has the cabinet and most 
of the front panel components.  Buy or trade.

Robert Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480

From v321uk at yahoo.co.uk  Sun Mar 28 11:02:18 2010
From: v321uk at yahoo.co.uk (John YAHOO)
Date: Sun, 28 Mar 2010 16:02:18 +0100
Subject: [Test-Equipment] Wanted: TS-710/TSM Crystal Impedance Meter,
	Good or Parts
In-Reply-To: <2d7a3.3cef4c2d.38dfe819@cs.com>
References: <2d7a3.3cef4c2d.38dfe819@cs.com>
Message-ID: <177E76F8523545B485BD561A610BD7E2@unknownd7cc458>

I have a TS710/TSM with the original printed manual.  It isn't for sale though..

TS710 is the military ID but it is also known by the manufacturers name and model number as the RFL (Radio Frequency Labs) model 
541C.  Might increase your chances in searches.

John


> I need a working TS-710 to test low freq FT-241 crystals used in the BC-604
> and BC-684 transmitters.  This is a rack mount unit with 5-1/4" tall panel.
> I have one in relatively poor condition, missing at least knobs and
> cabinet, condition otherwise unknown.  I'm interest in acquiring anything between
> a known to work one to a known not to work one that has the cabinet and most
> of the front panel components.  Buy or trade.
>
> Robert Downs - Houston
> wa5cab dot com (Web Store)
> MVPA 9480 

From brooke at pacific.net  Sun Mar 28 12:47:42 2010
From: brooke at pacific.net (Brooke Clarke)
Date: Sun, 28 Mar 2010 09:47:42 -0700
Subject: [Test-Equipment] Wanted: TS-710/TSM Crystal Impedance Meter,
 Good or Parts
In-Reply-To: <2d7a3.3cef4c2d.38dfe819@cs.com>
References: <2d7a3.3cef4c2d.38dfe819@cs.com>
Message-ID: <4BAF882E.6050508@pacific.net>

Hi Robert and John:

Since measuring crystals is one of the areas I'm interested in
http://www.prc68.com/I/Xtal.shtml
http://www.prc68.com/I/Xec.shtml
http://www.prc68.com/I/Xam.html
http://www.prc68.com/I/Xtc.shtml
I Googled TS-710 and found:
A modification to Test Set, Crystal Unit, Quartz TS710/TSM is described. 
The modification is comprised of revisions in several circuit areas with 
a resultant improvement in operation. Overdrive of low-resistance 
crystals is minimized, crystal power is more accurately and conveniently 
measured, and frequency/resistance calibration with any standard 
military crystal unit is possible.
http://oai.dtic.mil/oai/oai?verb=getRecord&metadataPrefix=html&identifier=AD0622778

TS-683/TSM	Crystal Impedance Meter, 10-140 MC		TM 11-5051
TS-710/TSM	"	"	    "    10-1100 KC		TM  NA
http://pages.cthome.net/fwc/XTAL.HTM

Rev C of MIL-T-12333C is also on line at ASSIST Quick Search
http://www.prc68.com/I/Man.shtml

John:  Do you have commercial model numbers for other Crystal Impedance 
Meters like I have on web page:
http://www.prc68.com/I/Xtal.shtml#TE

Have Fun,

Brooke Clarke
http://www.PRC68.com


WA5CAB at cs.com wrote:
> Group,
>
> I need a working TS-710 to test low freq FT-241 crystals used in the BC-604
> and BC-684 transmitters.  This is a rack mount unit with 5-1/4" tall panel.
>   I have one in relatively poor condition, missing at least knobs and
> cabinet, condition otherwise unknown.  I'm interest in acquiring anything between
> a known to work one to a known not to work one that has the cabinet and most
> of the front panel components.  Buy or trade.
>
> Robert Downs - Houston
> wa5cab dot com (Web Store)
> MVPA 9480
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>    


From kl0s at cox.net  Sun Mar 28 12:57:40 2010
From: kl0s at cox.net (Dino Papas)
Date: Sun, 28 Mar 2010 12:57:40 -0400
Subject: [Test-Equipment] Wanted: TS-710/TSM Crystal Impedance Meter,
	Good or Parts
In-Reply-To: <4BAF882E.6050508@pacific.net>
References: <2d7a3.3cef4c2d.38dfe819@cs.com> <4BAF882E.6050508@pacific.net>
Message-ID: <246B12CD-94E3-49C2-B6B4-FBE59BA29A5A@cox.net>

If all you're interested in is the frequency of operation and series resistance of crystals (and don't actually want to use vintage test gear) you could build the W1FB crystal tester described in the January 1990 QST (and reprinted in the W1FB Design Notebook).  FAR Circuits has the circuit board.  I built one and it works very well....good for matching crystals in filters.

Dino KL0S

On 28Mar2010, at 12:47 PM, Brooke Clarke wrote:

> Hi Robert and John:
> 
> Since measuring crystals is one of the areas I'm interested in
> http://www.prc68.com/I/Xtal.shtml
> http://www.prc68.com/I/Xec.shtml
> http://www.prc68.com/I/Xam.html
> http://www.prc68.com/I/Xtc.shtml
> I Googled TS-710 and found:
> A modification to Test Set, Crystal Unit, Quartz TS710/TSM is described. 
> The modification is comprised of revisions in several circuit areas with 
> a resultant improvement in operation. Overdrive of low-resistance 
> crystals is minimized, crystal power is more accurately and conveniently 
> measured, and frequency/resistance calibration with any standard 
> military crystal unit is possible.
> http://oai.dtic.mil/oai/oai?verb=getRecord&metadataPrefix=html&identifier=AD0622778
> 
> TS-683/TSM	Crystal Impedance Meter, 10-140 MC		TM 11-5051
> TS-710/TSM	"	"	    "    10-1100 KC		TM  NA
> http://pages.cthome.net/fwc/XTAL.HTM
> 
> Rev C of MIL-T-12333C is also on line at ASSIST Quick Search
> http://www.prc68.com/I/Man.shtml
> 
> John:  Do you have commercial model numbers for other Crystal Impedance 
> Meters like I have on web page:
> http://www.prc68.com/I/Xtal.shtml#TE
> 
> Have Fun,
> 
> Brooke Clarke
> http://www.PRC68.com
> 
> 
> WA5CAB at cs.com wrote:
>> Group,
>> 
>> I need a working TS-710 to test low freq FT-241 crystals used in the BC-604
>> and BC-684 transmitters.  This is a rack mount unit with 5-1/4" tall panel.
>>  I have one in relatively poor condition, missing at least knobs and
>> cabinet, condition otherwise unknown.  I'm interest in acquiring anything between
>> a known to work one to a known not to work one that has the cabinet and most
>> of the front panel components.  Buy or trade.
>> 
>> Robert Downs - Houston
>> wa5cab dot com (Web Store)
>> MVPA 9480
>> ______________________________________________________________
>> Test-Equipment mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Test-Equipment at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> 


From v321uk at yahoo.co.uk  Sun Mar 28 17:16:15 2010
From: v321uk at yahoo.co.uk (John YAHOO)
Date: Sun, 28 Mar 2010 22:16:15 +0100
Subject: [Test-Equipment] Wanted: TS-710/TSM Crystal Impedance Meter,
	Good or Parts
In-Reply-To: <4BAF882E.6050508@pacific.net>
References: <2d7a3.3cef4c2d.38dfe819@cs.com> <4BAF882E.6050508@pacific.net>
Message-ID: <9D7B9E521777478D814B3A7997F381E0@unknownd7cc458>

> John:  Do you have commercial model numbers for other Crystal Impedance Meters like I have on web page:
> http://www.prc68.com/I/Xtal.shtml#TE
>
> Have Fun,
>
> Brooke Clarke
> http://www.PRC68.com


Hi Brooke,

Signal Corps model TS330/TSM  (1 to 15 MHz) is RFL Model 459A

Signal Corps model TS683/TSM  (10 to 140 MHz) is RFL Model 531

There is also the AN-TSM/15 also by RFL which goes to beyond 200MHz I believe.
I don't know the RFL model number,  never did find one and don't have the manual .  Instead I have the solid state 200VHF by 
Saunders which does 10 to 200 MHz.

Cheers,
John  

From WA5CAB at cs.com  Sun Mar 28 19:03:11 2010
From: WA5CAB at cs.com (WA5CAB at cs.com)
Date: Sun, 28 Mar 2010 19:03:11 EDT
Subject: [Test-Equipment] Wanted: TS-710/TSM Crystal Impedance Meter,
	Good or Parts
Message-ID: <4b3a2.516190d4.38e13a2f@cs.com>

Dino,

I pretty much quit working on anything SS when I lost my last corporate 
karate battle and got laid off in 1999.  I have (and use) the TS-330 and TS-683 
and would rather have the TS-710 to match.

But thanks for the references.

In a message dated 3/28/2010 12:15:37 PM Central Daylight Time, 
kl0s at cox.net writes: 
> If all you're interested in is the frequency of operation and series 
> resistance of crystals (and don't actually want to use vintage test gear) you 
> could build the W1FB crystal tester described in the January 1990 QST (and 
> reprinted in the W1FB Design Notebook).  FAR Circuits has the circuit board. 
>  I built one and it works very well....good for matching crystals in 
> filters.
> 
> Dino KL0S
> 

Robert & Susan Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480

From k5jwkgary at gmail.com  Tue Mar 30 22:38:13 2010
From: k5jwkgary at gmail.com (Gary Harmon - K5JWK)
Date: Tue, 30 Mar 2010 21:38:13 -0500
Subject: [Test-Equipment] Power Meter TS-1285/YRM-120 Modules
Message-ID: <006a01cad07b$36be81d0$a43b8570$@com>

Looking for a CU-753/URM-120 module for 2-30 MHz.

 

Thanks very much.

 

73, GARY / K5JWK

 

 

 


From k5jwkgary at gmail.com  Wed Mar 31 11:24:41 2010
From: k5jwkgary at gmail.com (Gary Harmon - K5JWK)
Date: Wed, 31 Mar 2010 10:24:41 -0500
Subject: [Test-Equipment] Power Meter TS-1285/URM-120 Modules -- correction
Message-ID: <000f01cad0e6$4a19c9e0$de4d5da0$@com>

Looking for a CU-753/URM-120 module for 2-30 MHz.

 

Several companies probably made similar devices.  This is a tabletop
SWR/POWER METER instrument that has different plug in circular modules.
Each module has a switch on top to change the wattage.  One of my units is a
Sierra and the other is made by someone else.  Regardless, I have two of the
HF modules and one is flakey.  I'd like to find a replacement module or
perhaps sell this unit with the flakey module.

 

Thanks very much.

 

73, GARY / K5JWK

 

 

 


From k5jwkgary at gmail.com  Wed Mar 31 11:39:43 2010
From: k5jwkgary at gmail.com (Gary Harmon - K5JWK)
Date: Wed, 31 Mar 2010 10:39:43 -0500
Subject: [Test-Equipment] Need Bird 43 Stuff
Message-ID: <002501cad0e8$65090340$2f1b09c0$@com>

Would like to buy or trade for the following:

Case

ID plate

100H and 1000H slugs.  

 

I have the following to trade or sell:  

500A, 100B, 100C (note says reads 10w low), 2500H, 430-107 slugs

43 w/o slugs

 

73,

 

gary/K5JWK


