[Test-Equipment] TEKTRONIX 7000 SERIES ONE LOT

[appo2 at juno.com]

TEKTRONIX 7904 500MHZ OSCILLOSCOPE ONE LOT WORKING OK
1 HAS 7A19 7A16 7D15 7B92
2 HAs 7A19 7A26 7D15 7B92A
3     7a19 7A16 7D15 7B92A
4 AND 5 7A19 7A26   AND 7B92A
6 MAINFRAME ONLY,NEEDS REPAIR

TEKTRONIX 7844 WITH 7A26 7D15 7B85 7B80 AND R7844 DUAL BEAM SCOPE
R HAS NO PLUG IN AND POWER SUPPLY PROBLEM ,
ANOTHER R7844 FULLY PLUGGED IN,,TOTAL 3 EA

TEKTRONIX 7834 STORAGE SCOPE
HAS 7A19 7A26 7B80 7B85  2 EA UNTESTED

TEKTRONIX 1ghz  7104 AND R7103 X 2 FULLY PLUGGED IN  7A29 AND 7B10 7B15
SHOULD BE WORKING PLUS TWO MORE 7103 FOR PARTS,TOTAL 5 ,COMES WITH
A FEW COPIES OF 7103 MANUAL

TEKTRONIX R7903 WITH MODIFIED CRT,CAN BE CONVERTED TO REGULAR BY USING
7704A CRT,,,,ABOUT 20 EA,EVERY ONE THAT TESTED WERE ALL GOOD.

7903 FULLY PLUGGED IN AND WORKING 3 EA

TEKTRONIX 7904A WITH PLUG INS,,NO INTENSITY CONTROL BUT WORKING.
ANOTHER 7904A THAT HAD DAMAGED CASE AND FRAME FOR PARTS.
          
ONE EACH 11402 MAINFRAME,POWERS ON OK,SEEMS TO BE WORKING BUT NO WAY
TO TEST WITHOUT PLUG INS

PLUG INS
7S12X4,,7S12 WITH S6 AND S53 X2SETS,,S6 X 3,S4 X 2,S53 X 5,,AND ONE 067
0572-01 NORMALIZER,,SAMLING HEAD EXTENDER 012-0124-00 X 2 EA,ONE NEEDS 
REPAIR
7A13 X 9 ,,THIS BOX IS CODED C/C A,,WORKING
7S14 X 5
FOLLOWING LISTS ARE AT RANDOM
7A16P,7B90P,7B80,7A17X2,DL2,7A19X4
7B80,7B85X2,7B71,7A16P,7A29X3.,7B10,7B53A
7A24,7B53A,7B92A
7A19,7B85,7A18N,7M13,7A29,7B10,7D15,7A17,7B80,7B85,7A19X4
7T11,7A16P,7B90P
7A19X6 7A16
7A19,7A16P,7B80,7A16A
7B92AX2,7A16P,7A19
7B70X2,,7A16,7A19X2
7A16AX2 7A13,7B85,7S11X3
067 0587 01  X1,,067-0657-00

ALSO HAVE 5 EXTENDER BOXES TO REPAIR 7000SERIES PLUG INS,,TWO WITH TRAYS
THREE WITHOUT.,,,VALUABLE TOOLS

UNTESTED MEANS,,,,I CAN NOT REACH THEM TO TEST

K7FT,,,IN LAS VEGAS NEVADA
____________________________________________________________
PennyStocks Soaring 600%
Sign up for FREE email alerts on stocks that jump 600% and more!
http://thirdpartyoffers.juno.com/TGL3141/4c40077985863098d6st02duc