[Test-Equipment] HP 410C

[rbethman]

Ron,

There are TWO different manuals for the HP-410C.  They go by serial 
number, "early" and "Late"

The late manual doesn't show EITHER of the tubes, (diodes), in the probe.

Bob - N0DGN

bonddaleena at aol.com wrote:
> Hi. I have a pretty nice HP 410C. I bought it several years ago, and it 
> works ok on DC and Ohms. It did not come with the 11036A AC / HF probe. 
> I have since acquired one. Although I 'swear' I have several EA53 tubes 
> here (somewhere) I also have several NOS 2-01C tubes, in my hot little 
> hands. I was reading the instruction sheet that came with the 2-01C 
> tube and they describe 'adjusting R50' (this sheet only talks about the 
> 410B), for 5.0 Vrms. They DO describe adjusting R50 for 6.3 V when 
> using the EA53.
> OK, I have a Manual for my 410C, and nowhere do I see how to adjust the 
> voltage.
> I DO understand that the 410C supplies 6.3 VAC to the probe filaments 
> when in modes OTHER than AC. When AC is selected, the filiment voltage 
> is changed from AC to DC. It 'looks' like the probe filiment voltage is 
> 6.3 V. Period. Is the 410C limited to using JUST the EA53, where the 
> 410B could use both???
> Sooooo, it would 'appear' that the 2-01C cannot be used with the 410C. 
> Is this correct? Man, I DO NOT want to buy a EA53!! Can I just 'drop 
> the filiment voltage to 5 V? How long will a
> 2-01C last at 6.3 V??????
>
> HELP!!!
>
> I know that 'somewhere here', I have a ton of info on these great 
> voltmeters. However, a divorce and 3 moves can scatter yoiur 'stuff'.. 
> ha ha
>
> tnx
> ron
> N4UE
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>   

-- 
Bob - NØDGN