[Test-Equipment] Reasonably priced Calibration Shops?

[rbethman]

Roger,

BAMA has the HP-410C military TM 11-6625-1614-15 that covers:

ORGANIZATIONAL, DS, GS,
AND DEPOT MAINTENANCE MANUAL

There is a section on calibration.

Bob - N0DGN

Roger Shultz wrote:
> I may be asking the impossible but is there a reasonably priced shop or
> shops that does test equipment cal and repair?
>
> Specifically, my Tek 7L12 spectrum analyzer needs a repair on one attenuator
> position and the calibration even on the other positions appears to be low
> as is the calibration signal as measured on a reliable meter. 
>
> Additionally, I have a HP-410C that gives inconsistent results on a couple
> of ranges.
>
> I suppose this is what one should expect when one buys old and used
> "working" test equipment off eBay and at swaps yet it should be able to be
> brought back to life though perhaps the cost of doing so may be too great!
>
> Thanks for providing any sources that you may have used and are satisfied
> with.
>
> 73, Roger, NJ2R
>
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Test-Equipment at mailman.qth.net
>
>   

-- 
Bob - NØDGN