[Test-Equipment] Re: Boonton RF millivolt meter probe wanted

[Gary Schafer]

Does anyone have a scanned manual of the Boonton 91 or 92? I have the 
Motorola version made by boonton and I think it is either a 91 or 92. 
Looking for a manual for it.

Thanks
Gary  K4FMX

John Burch wrote:
> Hello John -
> Thanks very much for the reply to my WTB post for the Boonton
> RF millivoltmeter probe.
> 
> Yes, in reading the manual I can understand with the need for
> a probe with a serial number matching the meter itself to insure
> calibration throughout the meter's ranges.
> 
> Unfortunately I have *no* probe whatsoever, and was hoping to hook up 
> with someone who had a probe for a model 91 or 92 (or similar) Boonton 
> meter, yet had no meter to go with the probe.
> 
> I still hope that someone out there has a probe, or any of the probe
> accessories to get me started.
> 
> Thanks de John
> ..
> 
> ----- Original Message ----- From: "John Kolb" <jlkolb at jlkolb.cts.com>
> To: <test-equipment at mailman.qth.net>
> Sent: Sunday, December 18, 2005 12:28 PM
> Subject: Re: FW: [Test-Equipment] Boonton RF millivolt meter probe wanted
> 
> 
>>
>> The rule has always been that the serial number of the probe
>> has to match the serial number of the voltmeter.  If a replacement probe
>> is found, a very detailed calibration will be required.  I remember
>> seeing lots of adjustment pots in the 91, and don't remember
>> the manual as detailing the adjustment of them.
>>
>> I've got a manual for a Bonton model 85 RF distortion meter
>> (basically a calibrated notch filter and RF voltmeter) if someone
>> should need a copy someday.
>>
>> John
> 
> 
> _______________________________________________
> Test-Equipment mailing list
> Test-Equipment at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/test-equipment
> 
>