[Test-Equipment] HP 6201B Power Supply connections

[Bob Kulow]

Hi, Ray.  I have a 6201A (not B) that is working ,
but no manual for it.  This is the jumper setup on mine:

A1 - A2
A3 - A4 - A5
A6 - A7 - A8
A9 - (-S) - (-)
A10 - (+S) - (+)

73
Bob WA2UEH


>I just aquired an HP 6201B ( 0 to 20 Volts at up
>to 1.5 Amps output ) power supply that seems to
>be at permanent full output voltage regardless of
>front panel settings. I do not have a manual on this
>unit and I am wondering if the rear panel straps
>are correctly installed ( I am seeking to operate
>this unit as a standard PS with no special external
>programming connections )
>
>--Here are the connections at present :
>
>A4 connected to A5
>A6 connected to A7
>A9 connected to -S connected to " -"
>" +  " connected to +S
>
>I do have manuals for other HP power supplies but
>with the exception of the sense connections it appears
>as though HP / Harrison / Agilent does not have a uniform
>convention for the A1 to A10 terminals ( Based upon
>comparing manuals that I DO have !!)
>
>If anyone has an HP6201B manual and could confirm the
>above strap connections  I would greatly appreciate it.....
>
>TIA
>
>Ray Johnson   KE3QY
>St.Paul, MN
>johnsorj@aol.com.



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.560 / Virus Database: 352 - Release Date: 1/8/2004


--- StripMime Report -- processed MIME parts ---
multipart/mixed
  text/plain (text body -- kept)
  text/plain (text body -- kept)
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---