[Test-Equipment] Test Equip available
Rod Davis
[email protected]
Fri, 04 Oct 2002 10:49:39 -0700
Hi All,
The following test equipment will go on EBAY next week. I will give
TEST EQ
reflector people first shot before they get posted on EBAY.
These are quality items.
Please reply to me directly ([email protected], or [email protected]) if
you
have any interest before it gets posted for auction.
Thanks,
Rod KM6SN
Jacumba (San Diego area) CA
(note: this same email was posted on SBMS)
Item
#1 HP 8620C Sweeper Mainframe, Options 2,11 (IEEE488/HPIB
interface)
#2 HP 86222A .01-2,4GHz Sweep Generator Module
Internal and External Leveling, front panel N connector
#3 Omni-Spectra external detector P/N 2087-6001-00
Mod 20790 10 MHz � 18GHz
(for use with the above, external signal leveling �
keeps output within a fraction of 1 db across full sweep)
#4 HP 5340A Counter, Options 2,11
front and rear panel connections,
#5 HP 141Spectrum Analyzer,
with 8555A RF and 8552B IF
01 to 40 GHz �
with 8445 tracking filter, HAS DIGITAL
FREQUENCY READOUT
and WITH INTERCONNECT CABLE
(RF and IF units from Shafer Engineering
2 years ago )
#6 HP 8553 Spectrum
Analyzer, with 8443 tracking generator 100
khz-110 MHz
#7 HP 8410 Vector
Network Analyzer .1 to 2 GHz,
with 86222 sweep generator, sweep gen has
HPIB option
#8
HP 8745 S Parameter Test Set � to .1 to 2 GHz
#9
HP 8407 Vector Network Analyzer, .1 MHz to .1GHz ,with
HP 8601 sweep generator and 8600 digital marker
generator
#10 HP 5340 Phase
lock frequency counter � to 18 GHz
#11 HP 8640B
Low phase noise signal generator
#12 HP 3312 Function
Generator - purchased in last 24 mos.
from
Avalon Equipment Corp. Still has cal seals on it from
Avalon.
#13 HP 5328A
counter with high stability oven time base,
512 MHZ C channel option, and HPIB
output
#14 Xeltek Universal
Chip Programmer (for microprocessor and
gate arrays)
with a selection of socket adapters - used only one
day.
MANUALS: HP original manuals or Matsuta-quality reprints available for
most equipment
--- StripMime Report -- processed MIME parts ---
text/html (html body -- converted)
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---