[TenTec] HF Xcvr, PSs, Filters, VFO, NB, and more FS

Owner n0mq at sbcglobal.net
Tue Jun 17 20:48:36 EDT 2025


STOP SENDING ME MESSAGES  NO ONE HERE IS A RADIO PERSON

> On Jun 17, 2025, at 1:53 PM, Ken, W8EK <kenw8ek at gmail.com> wrote:
> 
> 
> TenTec Omni 545 w/Digital Readout,
> Power Supplies, Filters, Remote
> VFO, and Noise Blanker For Sale
> 
> .
> 
> TenTec Omni 545 with Digital Readout For Sale:
> 
> The 160 thru 10 meter HF transceiver is technically
> an Omni 545 analog. However, a frequency counter
> has been added, so that it now has a digital readout.
> So it is basically similar to an Omni 546.
> 
> It produces 100 Watts and has a very good
> receiver. An audio CW filter is built in, which
> is extremely effective.
> 
> This is a "Series B" Omni.
> 
> Cosmetically it is very good, but not mint.
> Everything works as it should.
> Buy the rig with the counter and manual for
> $300.
> 
> .
> 
> TenTec 255 Power Supply/Speaker For Sale:
> 
> The TenTec 255 power supply is designed
> to provide 18 amps at 13.5 volts, which
> means it will power most 100 watt HF rigs.
> It also includes a built in speaker that
> has great fidelity.
> 
> Also included is an electronic latching
> circuit that will turn the power supply
> off if more than 20 amps is pulled from it.
> 
> The output is provided via a four pin AMP
> connector, as used on most of TenTec's HF
> transceivers. There are also two RCA phono
> sockets for low current use.
> 
> A front panel meter indicates current drawn.
> 
> This one works 100% as it should, and looks
> great.
> 
> Buy it with paper work for $125.
> 
> .
> 
> Astron RS-20 A, 20 amp Power Supply For Sale:
> 
> This power supply is useful for Amateur Ham Radio
> applications, a test bench, or any place where
> regulated 13 V DC is needed at fairly high current.
> There are 1000's of these in ham shacks around the
> world.
> 
> Astron power supplies feature solid-state electronic
> regulation, EMI filter, fold back current limiting for
> protection from excessive current and shorted output.
> Input voltage is 115 VAC 50/60 Hz. Crowbar over
> voltage protection is also provided. These high
> quality power supplies are manufactured in the U.S.
> 
> The RS-20 A is rated at 20 amps intermittent use,
> and 16 amps continuous duty. The output voltage
> can be internally adjusted, as can the current
> limiting. This is a linear supply, so no switching
> noise.
> 
> This particular supply works great.
> It only varies 0.01 Volts with a load!
> Cosmetically it looks really great.
> 
> With paper work for $70
> 
> .
> 
> This filter is used in TenTec rigs
> in the 9 MHz IF. This includes the Orion I,
> as well as Omni series A, B, and C; Omni V,
> Omni VI, Argosy, Paragon, and maybe others.
> Any that have a 9 MHz IF.
> 
> InRad 762 premium filter
> 600 Hz wide, CW, $110
> 
> .
> 
> TenTec 243 Remote VFO For Sale:
> 
> The TenTec 243 Remote VFO is an accessory to
> the OMNI transceiving system which allows two
> frequencies of operation. A mode switch with
> LED indicators provides selection of any one
> of six modes of operation: OMNI transmit and
> receive; REMOTE transmit and receive; OMNI
> transmit-REMOTE receive; REMOTE transmit-OMNI
> receive; OMNI transmit-both receive; and REMOTE
> transmit-both receive.
> 
> Full, instant break-in is retained no matter
> what mode is selected.
> 
> In addition to the remote capability, a four
> position crystal oscillator may be selected
> as the remote generator for fixed frequency
> operation, such as for MARS or net operation.
> 
> This is a very versatile unit!
> 
> This one works as it should and looks great.
> 
> Buy it with paper work for $100
> 
> .
> 
> TenTec 248 Noise Blanker For Sale:
> 
> Do you have pulsing noise you would
> like to get rid of?
> 
> The TenTec 248 noise blanker is designed
> to fit the TenTec Omni 545 and 546 series
> of Omni radios. Installation is easy.
> You just snip a wire and plug it in.
> 
> This is a late model.
> 
> This unit works as it should, and includes
> hardware and paper work for $45
> 
> .
> 
> I also have many other accessories available such as many
> different types of microphones, HTs, VHF and UHF rigs, HF
> and VHF/UHF antennas, connectors, miscellaneous accessories,
> etc.
> Just too many to list here. Please e-mail your requests.
> 
> .
> Prices do not include shipping from Florida.
> 
> Thanks.
> 
> 73,
> Ken, W8EK
> 
> Ken Simpson
> E-mail to W8EK at FLHam.net or W8EK at arrl.net
> Voice Phone  (352) 732-8400
> 
> 
> 
> .
> ______________________________________________________________
> Tentec mailing list
> Home: http://mailman.qth.net/mailman/listinfo/tentec
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Tentec at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html



More information about the Tentec mailing list