[TenTec] PS., Filters, and many misc FS

[wa4uso at aol.com]

I need the Noise Blanker module for my Delta 580. ??  73 de wa4uso darrell


-----Original Message-----
From: Ken, W8EK <kenw8ek at gmail.com>
To: TenTec List - QTH <tentec at mailman.qth.net>
Sent: Mon, Jan 2, 2023 11:18 am
Subject: [TenTec] PS., Filters, and many misc FS


Filters for TenTec, Power Supply,
many misc parts For Sale:

.

TenTec 963 Power Supply:

The TenTec Model 963 is a switching power supply
that can be used on most any HF transceiver,
including TenTec HF transceivers, or any place
where up to 25 amps is needed.

Specs:
115/230 VAC input
25 amps continuous duty at 13.8 VDC output
Screw down terminals on rear for attachment
of transceiver power cable.
HWD 3.75"x7"x9.25”

This one works as it should.
Cosmetically, it looks like new, with no defects
of any sort.

Buy this one with paper work for $100

.

Crystal Filters for TenTec Rigs:

All of the following work as they should.  They look great also.

TenTec Filters are $79 each, and Inrad Filters are $125 each.

.
The following are for the 9.0 MHz IF and fit
rigs such as the Omni series A, B, and C;
Omni V, Omni VI, VI +,
Argosy,
Paragon, Orion I and others.

TenTec 217 filter
500 Hz wide, CW filter

.

The following filters are for use in the 6.3
MHz IF and fit rigs such as the Corsair I
and II, Delta, Omni V VI 6+, and others.

TenTec 282 filter
250 Hz wide for narrow CW

TenTec 285 filter
500 Hz wide for CW

TenTec 288 filter
1800 Hz wide for narrow SSB or wide CW

.

InRad Crystal Filters for TenTec:

The following InRad Filters are available. They all
work as they should. They fit TenTec rigs as indicated,
and look like new. They may in fact be new, as
they are still in their original boxes. They are
$125 each, plus shipping from Florida.

The following are for the 9.0 MHz IF and fit
rigs such as the Omni series A, B, and C; Omni V,
Omni VI, VI +, Argosy, Paragon, Orion I and others.

InRad #760 (replaces TenTec 219)
250 Hz for narrow CW

.
The following filters are for use in the 6.3
MHz IF and fit rigs such as the Corsair I and II,
Delta, Omni V, VI, 6+, and others.

InRad #750 (replaces TenTec 285)
400 Hz for CW

InRad #761 (replaces TenTec 282)
250 Hz for narrow CW

.

TenTec Omni 546 Parts For Sale:

I have a TenTec Omni D, Series B, Model 546 that I
am parting out.
Many, probably most, of the parts are compatible
with most all of the Omni series A, B, and C rigs.

PTO, digital readout and final module are
gone, but many, many parts are still available.

Available:

Metal parts:
Rear panel
left and right sides
main chassis
Large tuning knob

Preamp assembly w/ metal work

3 switch module on left side

S meter light and socket

Plastic PCB Holder sockets

Offset pot

Drive pot

Selectivity rotary switch

Mode switch

Mic jack

Headphone Jack

Internal PC boards available:
SWR / TR
T/R Relay
RF Trimmer
VFO Mixer / Oscillator
Low Level Driver
8 Pole Crystal Filter
Audio Amp
SSB Generator
Attenuator

Plus a few things not listed.

Please let me know what you need.

.

TenTec Century 21, Model 570 Parts For Sale:

I have parts from a Century 21, model 570, available.
Most of these parts should also fit the Model 574
digital version.
Hopefully these parts will let several rigs live again.

PTO, power supply parts, and final module are gone.

Available Parts:

Metal parts:
Inside front subpanel
Rear Panel
Both left and right sides
Main chassis

Headphone Jack

3 pilot bulbs and sockets

Circuit Board Assemblies:
Audio Power Amp 80357
Front end board 80359
Low Pass Filter 80360

Please let me know what you need.

.

I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.

.

Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400





.

______________________________________________________________
Tentec mailing list
Home: http://mailman.qth.net/mailman/listinfo/tentec
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Tentec at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html