[TenTec] TenTec HF Transceiver, Power Supply, Filters FS

[Ken, W8EK]

TenTec HF Transceiver, Power Supply, Filters, and more For Sale:

.

TenTec Omni VI+ 564 HF Transceiver:

The Omni VI+ is a beautiful HF transceiver that
covers from 160 thru 10 meters, and produces
about 100 Watts in USB, LSB. CW, FSK, or AFSK,
and FM.

It has exceptional strong signal handling
capabilities, yet hears the weak ones great
as well. It uses crystal mixing (instead of
a synthesizer) to essentially eliminate the
phase noise problem.

You can add crystal filters in both the 6.3 MHz
and the 9 MHz IFs for better selectivity. It
includes DSP, with Noise reduction, low pass
and notch.

Of course it has TenTec's legendary fast QSK on
CW. Keyer built in. Dual VFOs are also included.
Speech processor and PC interface built in, plus
100 memories. 13 V DC at 20 amps required.

This one works 100% and looks like it just came
out of the box new. It is immaculate with no
scratches or defects.

With paper work for $600.

.

TenTec 961 Power Supply/Speaker:

The TenTec 961 power supply is a linear power
supply (which means no switching noise is
possible) that provides 13.8 V DC at up to 20
amps continuous. It has both over voltage and
over current protection built in.

Cosmetically, it is made to match the 560/561
Corsair I and II, the 562 Omni V, the 563/564
Omni VI (all flavors), the 585/586 Paragon I
and II, and probably others. It has a nice
front facing speaker included, which improves
the sound considerably.

Electrically, it has the 4 pin, in-line power
connector which matches the above listed rigs,
plus many other TenTec rigs. It also has RCA
jacks for low current use.

This particular unit looks like new.
You would think it just came out of its box new.
No defects. Of course it works as it should.

With paper work for $120

.

Crystal Filters for TenTec Rigs:

All of the following work as they should.  They look great also.

TenTec Filters are $79 each, and Inrad Filters are $125 each.

.
The following are for the 9.0 MHz IF and fit
rigs such as the Omni series A, B, and C;
Omni V, Omni VI, VI +,
Argosy,
Paragon, Orion I and others.

TenTec 217 filter
500 Hz wide, CW filter

TenTec 218 filter
1800 Hz wide, Narrow SSB or wide CW

.

The following filters are for use in the 6.3
MHz IF and fit rigs such as the Corsair I
and II, Delta, Omni V VI 6+, and others.

TenTec 282 filter
250 Hz wide for narrow CW

TenTec 285 filter
500 Hz wide for CW

TenTec 288 filter
1800 Hz wide for narrow SSB or wide CW

.

The following InRad filters are available.
They look to be new, and may be, still in
their original boxes.

For the 9.0 MHz IF (see list above)

#760 (replaces TenTec 219)
250 Hz for narrow CW

#769 (replaces TenTec 217)
400 Hz for CW

.
For the 6.3 MHz IF:

#750 (replaces TenTec 285)
400 Hz for CW

#761 (replaces TenTec 282)
250 Hz for narrow CW

.


I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.

.
Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400






.