[TenTec] OMNI Omni with intermittent connector

[John King]

My highly prized Ten Tec Omni VI has a worsening intermittent that is becoming almost constant. I know where the problem is located and cleaning and DeOxit does NO good. The problem is mechanical in thr board described and located as follows:
The small printed circuit board on the vertical aluminum panel that reaches from back to front of OMNI VI has a terrible INTERMITENT problem. It has two sets of leads and two connectors going to the board. That is the small board where plug 41A  and 59A connected. There s a lot of "slop" in the connections that even allows moving air to move them enough to lose contact. I have sprayed the connectors and terminals with DeOxit but that does not help. I am hesitant to work on the connectors or touch up the solder connections on the board. The TUNE function seems to be affected by the problem. It is a mechanical symptom of the problem with the board and the two connectors.
I suspect the problem is in the small board as opposed to the connectors and leads. If anyone has parts for an Omni VI and the stash includes the small board, I would like to acquire it.
Otherwise, my Omni Vi works great  !!
Please email me if you have the little board or an effective CURE !!
Thanks and 73
John King, K5PGW