[TenTec] HF Transceiver and PSs FS

[Ken, W8EK]

HF Transceiver and Power Supplies For Sale:
.

.
TenTec Orion 565 HF Transceiver For Sale:

Features:

Full dual receive capability

Bandwidth, AGC, PBT, Hi-Lo Cut, AF and RF Gain, attenuator,
DSP NR and notch filtering independent on each receiver

ORION‘s main receiver performance is unmatched by any other
HF transceiver.

590 receive IF-DSP bandwidth filters (100–6000 Hz, 10 Hz steps)

Up to six crystal filters in the main receiver

The sub receiver has 590 filters independent of the main
receiver filtering

Continuous real-time spectrum display

Rated 100% duty cycle, 100 watts output

Nine adaptive DSP noise reduction filters

Dual noise blankers

Heavy duty internal automatic antenna tuner

Voice keyer and CW memory keyer built-in

See https://www.tentec.com/?p=1472 for more info.

This one looks very close to new, and works the same.
No defects.
Includes heat sink fan, power cord, paper work, and
internal antenna tuner for $1100
.

.
TenTec 961 Power Supply/Speaker:

The TenTec 961 power supply includes a nice built in
speaker.

I think this is the last linear power supply that TenTec
produced. Being linear, it will not produce electrical
switching noise.

Specs say it is good for 20 amps continuous, or 22 amps
for 5 minutes.

Cosmetically, this supply matches the Corsair II, Paragon,
Omni V/VI series, and probably others.

A nice speaker is included. This particular unit works fine
and looks exceptionally good. I can not find a scratch on it.

Paper work is included for $100.
.

.
TenTec 252 MO Power Supply:

The TenTec 252 MO provides up to 20 amps at 13 V DC to
power most any 100 Watt HF transceiver. An ammeter is
included.

The color is the chocolate brown / blackish / dark grayish
that matches the TenTec Omni A and D series A, B, and C,
the Hercules Amp, Delta 580, and others of this era, but
it can be used on most 100 W rigs, including the Jupiter.

The 4 pin molex output plug matches many, many TenTec rigs,
but this one has had heavy duty binding posts added, so
that it can be used with any rig.

This one works fine, and looks good.
With paper work for $65.
.

.
Astron Power Supplies For Sale:

Astron power supplies are pretty much the standard
for ham use. They provide 13.8 V DC to power most
all of our equipment, and do it well, with good
reliability.

Features:
Excellent Solid State Electronic Regulation
Fold Back Current Limiting
Crowbar Over Voltage Protection
Heavy Duty Heat Sink
Input Voltage 105-125Vac
Output Voltage nominal 13.8Vdc, but adjustable
Ripple under 5mV
Chassis Mount Fuse

I have several available:

VS-50 M - 37 amps continuous, 50 amps ICS
It has both an ammeter and a voltmeter. Current limiting
and output voltage are both adjustable from the front panel.
$200

RS-35 A - 27 amps continuous, 35 amps ICS; $100

RS-20 A - 16 amps continuous, 20 amps ICS; $65

All of these work well and look close to new.
Tested output voltage varies from 0 to 0.02 volts
under load.

Prices do not include shipping from Florida.
Pick up near Ocala is much preferred.
.

.
TenTec Model 48-15-800 "Wall Wart" power supply
15 V DC at 800 ma $15
.

.
I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.

.
Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400



.



.