[TenTec] TenTec speech processor and other items FS

[Thomas Jenkins]

Hi Ken,

If available...I will take both CW key cables.

Thanks and 73,

Tom  NI2F

On Tue, Jul 14, 2015 at 9:59 PM, Ken, W8EK <kenw8ek at gmail.com> wrote:

>
> TenTec RF Speech Processor, Power Transformer, HF linear
> amplifier, and other miscellaneous accessories For Sale:
>
>
> TenTec 234 RF Speech Processor
>
> The 234 is the predecessor to the 715 speech processor.
> It matches the early Omni 545/546 Series A, B, and C rigs, Delta,
> and others of that era, but of course can be used with any rig,
> since it simply inserts in the microphone line.
>
> This is an extremely effective unit, typically providing about a
> 6 db increase in talk power.  That is about the same as a linear
> amplifier -- at much less cost.
>
> It has both a 4 pin plug and a 1/4 inch stereo jack for input,
> and needs 13 V DC at low current. With paperwork for $150.
>
>
> Heath SB-220 HF Linear Amplifier:
>
> The SB-220 uses a pair of 3-500 tubes to deliver close to legal
> limit output on the 80, 40, 20, 15, and 10 meter bands. It is a
> proven design that has been copied by many others.
>
> This SB-220 works fine and looks very close to new, with no known
> defects. In addition, it has had most of the Harbach improvements
> added including a new set of computer grade filter capacitors with
> improved equalizing/bleeder resistors, new metering/rectifier board,
> "Soft Key" board to reduce keying voltages and currents, glitch resistor,
> protective diodes, new HV metering resistors, new fan, and more.
> It produces in the vicinity of 1200 Watts output, depending on band.
> The input circuit has low SWR to match your rig. This is a really
> nice amp. Please call or e-mail for more details.
>
> With paper work for $950. Pickup near Ocala, FL, just off of I-75,
> would be preferred. Shipping can be arranged if needed.
>
>
> Power Transformer for TenTec Hercules 444 HF linear amplifier
>
> This power transformer is used with the older Hercules 444 HF
> linear amplifier (not the newer Hercules II).  It includes the
> molex plug, so that it will simply plug into the 444.  This is
>  a "spare" transformer that was never used.
>
> The Hercules 444 provided 48 to 50 volts DC at up to 25 amps
> to produce about 1000 to 1200 watts DC input in order to get
> 600 watts of RF out.  This transformer is roughly a 7 inch cube,
> so is a very healthy transformer of approximately 1250 VA, if
> someone wants to use it for another project.  $75
>
>
> Original box for TenTec 2591, Two meter HT, including the
> foam insert. $8
>
>
> Cables for CW keyers and keys:
>
> Cable for paddles
> About 3 feet long, and with a 1/8 inch (3.5 mm) stereo
> connector on the end, like used by most rigs. $8
> As above, but 1/4 inch plug. $8
>
> Cable for straight key
> About 3 feet long, with a mono 1/8 inch (3.5 mm) phone
> plug on it, as used with a straight key. $5
> As above, but 1/4 inch plug. $5
>
>
> I also have many other accessories available such as many
> different types of microphones, HTs, VHF and UHF rigs,
> antennas, etc. Just too many things to list here.
> Please e-mail your requests.
>
>
> Prices do not include shipping from Florida.
>
>
> Thanks.
>
> 73,
>
> Ken, W8EK
>
> Ken Simpson
> E-mail to W8EK at FLHam.net or W8EK at arrl.net
> Voice Phone  (352) 732-8400
>
>
>
>
>
>
>
>
>
> ______________________________________________________________
> Tentec mailing list
> Home: http://mailman.qth.net/mailman/listinfo/tentec
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Tentec at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>