[TAC] Antenna Drill

[Greg Surma]

Sounds good!

I would like eveyone's ICE (in case of emergency) phone numbers so I can
make up a list.  

-----Original Message-----
From: tac-bounces at mailman.qth.net [mailto:tac-bounces at mailman.qth.net]
On Behalf Of Hank Kohl
Sent: Monday, October 17, 2005 7:11 PM
To: Thumb (MI) Area Contesters (and DX'ers)
Subject: [TAC] Antenna Drill

Today Kurt, Ian and I put the Spiderbeam up.  We raised it
to about 15 ft on the fiberglass mast - It appeared that any
higher than that and it would break the fiberglass mast.  So
the next time we are going to put it up on the aluminum mast.
That should work much better.

The total time to assemble it and get it in the air took less than
90 min.  Worked EA3JE (or EA2JE - did not write it down) on
20M.  He was 10 to 20 over S9.  When we rotated the beam by
rope, he went to S8 off the side.  Pointed at him, he gave us 5
over S9.

Stan, Greg, Ted - If we can get together, Ian and I will show up
and put it together again.  I think every time it will get easier!

Taking it down took a little under 1 hour.  The day was about 50
degrees, light winds out of the South and we finished about 20
minutes before the rain started.

Kurt's wife, Donna, and my wife, Kathie, went to the local cider
mill (and gift shop) and brought us cider and do-nuts.

73    Hank
--
'Never argue with an idiot. They drag you down to their
level then beat you with experience.'    -anon
______________________________________________________________
TAC mailing list
Home: http://mailman.qth.net/mailman/listinfo/tac
Help: http://mailman.qth.net/mmmain.htm
Post: mailto:TAC at mailman.qth.net