[Swan] Swan VFO off frequency
yash at aol.com
yash at aol.com
Sun Mar 11 14:39:46 EDT 2012
Mark
the vfo is now working as It should,realigned all the bands with my sig gen and frequency counter. I think that someone tried to use the 508 with another swan rig with a different IF.
dale wt4t
-----Original Message-----
From: Mark Shaum <k9tr at btsnetworks.net>
To: swan <swan at mailman.qth.net>
Sent: Sun, Mar 11, 2012 2:12 pm
Subject: Re: [Swan] Swan VFO off frequency
I think I will go the route of adjusting each band trimmer ,unless
someone see's something Iam missing thanks for any help on this dale wt4t
> I'd see if the dial could be loosened on the VFO shaft, turned 44 kc then
tightened without disturbing the frequency. Have to look for something in
common if all bands are off by the same general amount. Are you sure all bands
are off by 44 kc? I seem to recall the number of kc per knob revolutionmay vary
per band. This throws another fly into the ointment :)
Mark K9TRO
______________________________________________________________
Swan mailing list
Home: http://mailman.qth.net/mailman/listinfo/swan
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Swan at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
More information about the Swan
mailing list