[Swan] SWAN crystals

[Brian Carling]

Hi Jacob - first on using your computer to key the PTT lkine of the 250 - I don't 
see why not. It is possible on other rigs, but I have no idea what the voltage is on 
that PTT line or the current requirements. Take a look at the schematic & see if it 
is something your computer interface output can handle...
If not you can always add a small relay or power transistor in between if you have 
to. Piece of cake.

Next on the 31.333 Mc/s crystal, there are many sources out there...

Try my directory:

http://dmoz.org/Recreation/Radio/Amateur/Boatanchors/Crystals/
Plenty of links to suppliers & information.

Also, there is the Crystal Swap Bulletin Board where you can post your need:

http://www.senac.com/boards/880/

I hope that helps you!

73 - Bry, AF4K

On 10 Jun 2002 at 22:18, Jacob Tennant wrote:

> Looking for advice on a place to purchase a 31.3333 Mhz crystal so as
> to use my TV2b transverter with my 250?
> 
> Jacob Tennant  K8JWT
> 
> _______________________________________________
> Swan mailing list
> Swan@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/swan