[SkyHub] FW: Upgrading a PiStar-based Hotspot from 3.x to the latest 4.1.4 Version of PiStar AND Cheyenne Repeater Project update

[Jack Roland]

Greetings all, more information about upgrading and updating your Pi-star hotspots.

We will be discussing this on tomorrow nights net.

And, BY THE WAY, thanks to Jim KE0DNL for supplying the Yaesu DR- 1 Wires-X repeater and duplexer for the new Cheyenne WY 449.775 repeater.  We are up to $155 in donations of our goal of $300 for the deployment.  If you can help, go to the https://skyhublink.com/support/, we have made it easy to help on these upgrades.  ANY AMOUNT WILL HELP GET US THERE!  THANK YOU!

73'
Jack

From: Greg Liverman <greg.liverman at live.com>
Sent: Sunday, February 14, 2021 3:28 PM
To: ke0vh at outlook.com
Subject: Upgrading a PiStar-based Hotspot from 3.x to the latest 4.1.4 Version of PiStar

Normally, you can upgrade your PiStar-based hotspot to the latest version using the Expert | Upgrade command from the PiStar dashboard menu.

Because of the magnitude of the change, that is not possible going from a 3.x version. You have to re-image the SD card from scratch. Toshen KE0FHS has assembled a great set of instructions here:
https://amateurradionotes.com/pi-star-upgrading-to-v4.htm

I highly recommend his whole site for anyone working with a PiStar-based hotspot:
https://amateurradionotes.com/index.htm


Greg
KØMGL
DM78
greg.liverman at live.com<mailto:liverman at att.net>
+1 719.689.0787


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/skyhub/attachments/20210214/8a4d6d00/attachment.html>