SL5ZXP Winlink Server på Öja Fungerar nu med RMS Relay Hybrid Network

[SM5TAH Mats]

Hej alla,

Nu har man publikt släppt nyheten om det nya RMS Relay Hybrid Network 

I korthet gör programmet så att om man inte har internet förbindelse scannar
vår RMS server enligt en dynamisk networklista

andra HF stationer och meddelandet går via Pactor.

 



Vi har nyligen testat programmet på vår server på Öja 

och glädjande nog fungerar programmet utmärkt

 

När internet finns går RMS som vanligt

 



Som användare kommer man in med på HF med RMS klienten med  Winmor, Pactor
som TNC  och på VHF med Paclink

 

Tackar SM0TSC Johan Hansson för hjälp med installation och nedan info.

Rekommendera varmt att studera  bifogade PDF fil eller klicka på länken
nedan

We are in the final stages of testing a new version of RMS Relay that
supports the Winlink Hybrid Network.  In a few weeks we will release this as
the production version and autoupdate all RMS that are running RMS Relay.
We would like to get as many RMS as possible to try it during the final test
period before release.  About 45 RMS have been participating in the test for
the last 3 months.

 

The Winlink Hybrid Network is a new generation of the Winlink system.  It
supports the traditional mode of operation where a client connects through
an RMS to reach a CMS, and it also supports passing messages by radio from
RMS to RMS.  The radio-forwarding feature allows an RMS to continue
providing service if its Internet connection is down, and it allows it to
relay traffic for other RMS that are off the Internet.  There are no
disadvantages to being part of the hybrid network; it just allows an RMS to
continue to operate without an Internet connection.

 

Here are the requirements to participate in the hybrid network:

 

·         * The RMS must have a Pactor HF TNC.  Note: The Pactor TNC is not
dedicated to forwarding traffic; it is also used to receive connections from
client stations.  Client stations can connect to the RMS using any mode:
Pactor, Winmor, Robust Packet and packet.

 

·         * Trimode must be used to control the TNC and radio.

 

·         * The callsign of the RMS must not be longer than 6 characters,
and it must not have a SSID extension (i.e., “-nn”).

 

 

 

This document has a PowerPoint presentation explaining how the hybrid
network works:

 <http://www.dtreg.com/Winlink_Radio_Network.pdf>
http://www.dtreg.com/Winlink_Radio_Network.pdf

 

Phil

W4PHS

73

SM5TAH/Mats

-------------- next part --------------
En HTML-bilaga skiljdes ut...
URL: <http://mailman.qth.net/pipermail/sk5um/attachments/20131024/9946aac7/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 34328 bytes
Desc: inte tillgänglig
URL: <http://mailman.qth.net/pipermail/sk5um/attachments/20131024/9946aac7/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.png
Type: image/png
Size: 59299 bytes
Desc: inte tillgänglig
URL: <http://mailman.qth.net/pipermail/sk5um/attachments/20131024/9946aac7/attachment-0003.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Winlink_Radio_Network.pdf
Type: application/pdf
Size: 1265518 bytes
Desc: inte tillgänglig
URL: <http://mailman.qth.net/pipermail/sk5um/attachments/20131024/9946aac7/attachment-0001.pdf>