[SJRA-Members] Downsizing at K1JT

[Joe Taylor]

Sorry, guys.  Apparently attachments are not allowed.  Here's my list, 
inline:

Yaesu FT-2000 HF/50 MHz Transceiver, excellent condition
It has transverter features.  These go for $1200 - $1800 on EBay.
I'm asking $800.

Three good padded headsets.  One is the Heil model with a boom mike
and connection for a footswitch.

WSPRlite Classic Antenna Performance Analysis System

DEMI transverter for 1296 MHz.

LNA Technology CA 50T: LNA preamplifier, 50 MHz

Advanced Receiver Research P432VDG: LNA preamplifier, 432 MHz
gain 20 dB, NF 0.8 dB

I0JXX LNA432JXX: 432 MHz preamp, SMA connectors, NF 0.4 dB, gain 23 dB

Heathkit "Cantenna": 1 kW dummy load

Downeast Microwave Model BT: Bias Tee, N connectors

RIGblaster (original model)

MFJ-434: Voice Keyer

MFJ-911H: 1:1 or 4:1 Balun/Unun

MFJ-4117 Bias-Tee with DC Switch

Daiwa CN-101L: SWR & Power Meter, 1.8 to 150 MHz
Full scale 15, 150, or 1500 W; selectable PEP or Average power.

Dentron W-2 SWR & Power Meter
Reads Forward and Reflected power, full scale 200 or 2000 W.
In-line sensor may be mounted remotely.

TelLabs Regulated Power Supply, 24 or 48 VDC,  1 A

Programmed Test Sources PTS 160, 0.1 to 160 MHz programmable
synthesizer.  I have two of these: one with front-panel witches to set
frequency, one without.

LDG Electronics AT-11 Automatic Antenna Tuner

Johnson Viking MatchBox, Balanced Antenna Tuner, 275 W

Cynex PS-77A Regulated Power Supply, 13.8 VDC, 4 A

Creative Professional E-MU 0202 USB Audio Interface
External audio soundcard, 2 hannels, 24-bit, 192 kHz sample rate.

Power Supply with 4 DC voltage outputs: +5, +12, -12, +12 VDC

DataPulse 101 Pulse Generator

Delta 8" Bench Drill Press

Panel Meters by Simpson, Weston, Westinghouse, General Electric, ...
These are beautiful!

0 - 50 uA DC
0 - 1.0 mA DC
0 - 15 mA DC
0 - 50 mA DC
0 - 200 mA DC
0 - 15 A DC

0 - 15 A AC
0 - 150 V SC
90 - 130 V AC

0 - 1.5 A RF, with SO-239 connectors in/out
0 - 3 A RF, with SO-239 connectors in/out
0 - 3 A RF

Hard-to-find, old-style air variable capacitors: single section,
multi-section, some with high-voltage spacing, ...

Lots of good-quality coaxial cables and jumpers -- some with
connectors, some without.

Dozens of inter-series coax adapters: UHF, N, BNC, SMA, ...

Coax relays with UHF, N, and SMA connectors; SPDT, SP4T, SP6T, SP8T

Directional couplers, N connectors


	-- Joe, K1JT


On 9/3/2021 5:03 PM, Joe Taylor wrote:
> Try again -- this time with the attachment included!
> 
> On 9/3/2021 4:56 PM, Joe Taylor wrote:
>> Hi Fellow Club Members,
>>
>> Last call!
>>
>> Lots of good equipment and parts are still available, including both 
>> HF and VHF/UHF oriented.  I'd hate to see any of this go to the 
>> dumpster, if it can be useful to someone.
>>
>> An updated list of still-available excess equipment is attached.  A 
>> few items (mostly near the top of the list) can be yours for any 
>> reasonable offer.
>>
>> Most of the rest -- and lots of things not listed -- are yours for 
>> FREE pickup.
>>
>> Anyone need a high voltage supply for a vacuum tube PA?  I have a nice 
>> supply for a KW amp.  It's Variac controlled, max 2500 V DC at 0.5 mA 
>> or better.  I think a diode rectifier is bad, but possibly something 
>> else is blown.  The supply is FREE for pickup.  With a big transformer 
>> and a Variac, it's heavy.
>>
>> I will be here all day today and tomorrow (Saturday), Sunday after 1 
>> PM, and next week if needed.
>>
>> If you'd like to reserve something for later pickup, email me.
>>
>> Address:
>> 272 Hartley Avenue
>> Princeton, NJ  08540
>>
>> Landline:
>> 609-683-0571
>>
>>      -- 73, Joe, K1JT
>> ______________________________________________________________
>> SJRA-Members mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/sjra-members
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:SJRA-Members at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html