From n2oo at comcast.net  Tue Aug  3 18:31:16 2021
From: n2oo at comcast.net (BobSchenck)
Date: Tue, 3 Aug 2021 18:31:16 -0400
Subject: [SJDXA] Bouvet
Message-ID: <C9BC4F19-17A8-4D8B-8E4D-0A576B72F60D@comcast.net>

I just got this. FYI

Press Release from the Intrepid DX Group            

 

Dear Global DX-Community. 

On June 18th, we announced that we were continuing to seek new transportation to Bouvet in support of our Bouvet 2023 project. At the same time, we have refunded all donations as there was a high degree of uncertainty that we could move forward. 

We are pleased to announce that we have found a suitable/affordable vessel willing to take us to Bouvet. We are negotiating the terms of that charter contract now. 

We have submitted a new application to the Norwegian Polar Institute. 

We have revised the Leadership of our team as follows:

David Jorgensen-WD5COV Co-Leader, Operations, Antennas.

Kevin Rowett-K6TD Co-Leader, Systems/Networks, Procurement, Logistics

Paul Ewing-N6PSE Co-Leader, Planning, Public Relations, Tents, Logistics. 

Together, this leadership team will assemble 12 Operators to make this vision a reality. 

We are revising our website and soon, we will begin fundraising for this renewed effort. 

We are extremely grateful for all our past Sponsors and Donors and we hope that you can support this renewed effort. 

 

Sincerely, 

The Bouvet 2023 Team


73
Bob Schenck, N2OO 
Sent from my Apple portable radio device
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/sjdxa/attachments/20210803/4b1cc98f/attachment.html>

From n2oo at comcast.net  Thu Aug 12 20:10:27 2021
From: n2oo at comcast.net (BobSchenck)
Date: Thu, 12 Aug 2021 20:10:27 -0400
Subject: [SJDXA] Postage rates going up August 29th
Message-ID: <E90B5273-1CD6-4650-8438-7723B685EACA@comcast.net>

Domestic .55 to .58
International 1.20 to 1.30

	https://blog.stamps.com/2021/06/04/usps-to-implement-second-postage-rate-increase-in-2021/



73
Bob Schenck, N2OO 
Sent from my Apple portable radio device
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/sjdxa/attachments/20210812/8fe18435/attachment.html>

From n2oo at comcast.net  Thu Aug 12 20:11:43 2021
From: n2oo at comcast.net (BobSchenck)
Date: Thu, 12 Aug 2021 20:11:43 -0400
Subject: [SJDXA] Bouvet update
Message-ID: <415D5E60-F9D0-4C8C-8AA5-B39C48170FAD@comcast.net>

> Subject: News from the Intrepid-DX Group
> 
> ?
> Dear DX Community, 
> 
> We now find ourselves the #3 team in line to go to Bouvet. This recent development is not comfortable for us so we are now re-examining the Top Ten most wanted DXCC entities with a plan to redirect our efforts to an activation that will be most beneficial for everyone. 
> 
> We are now closing our plans to visit Bouvet, however we plan to activate a different rare and much needed entity in January/February 2023. That is now our focus. 
> 
> Watch for more updates on this exciting new project. 
> 
> We wish our former 3Y0J Teammates a safe and productive journey to Bouvet. 
> 
> Thank you, 
> 
> The Intrepid-DX Group
> http://www.intrepid-dx.com

73
Bob Schenck, N2OO 
Sent from my Apple portable radio device
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/sjdxa/attachments/20210812/c4a108a2/attachment-0001.html>

From n2oo at comcast.net  Sat Aug 14 17:31:40 2021
From: n2oo at comcast.net (BobSchenck)
Date: Sat, 14 Aug 2021 17:31:40 -0400
Subject: [SJDXA] Fwd: Following Earthquake in Haiti,
	Radio Amateurs Asked to Keep Frequencies Clear
References: <20210814194201.13336200E91B@bmail.arrl.org>
Message-ID: <052A95EA-0C84-4205-9AC2-EE244FE95294@comcast.net>

FYI

73
Bob Schenck, N2OO 
Sent from my Apple portable radio device

Begin forwarded message:

> From: ARRL Web site <memberlist at www.arrl.org>
> Date: August 14, 2021 at 3:42:19 PM EDT
> To: N2OO at comcast.net
> Subject: Following Earthquake in Haiti, Radio Amateurs Asked to Keep Frequencies Clear
> 
> ?
> Following Earthquake in Haiti, Radio Amateurs Asked to Keep Frequencies Clear 
> August 14, 2021 | ARRL
> 
> In a statement received by ARRL on August 14, 2021, Region 2 of the International Amateur Radio Union (IARU-R2) has requested that radio amateurs in the Americas keep the following frequencies clear to support emergency communications in Haiti following an earthquake this morning: 3750 kHz, 7150 kHz and 14330 kHz. The statement came from IARU-R2 Emergency Coordinator (EMCOR) Carlos Alberto Santamar?a Gonz?lez, CO2JC.
> 
> According to preliminary information from the United States Geological Survey (USGS), a 7.2 magnitude earthquake struck Haiti on August 14, 2021 at 1229 UTC, about 12 kilometers northeast of Saint-Louis-du-Sud and 33 kilometers to the east-northeast of Les Cayes, Haiti; 18.352 degrees north and 73.4801 degrees west at a depth of 10 km.
> 
> Mr. Jean-Robert Gaillard, HH2JR, President of the Radio Club of Haiti, reported significant structural damage.
> 
> International news reports fear high casualties.
>  
> ARRL  The National Association For Amateur Radio?
> 225 Main Street, Newington, CT 06111-1400 USA
> www.arrl.org
>  
> To unsubscribe from messages, go to:
> http://p1k.arrl.org/oo/d3bb0c9c0627ec3e22cfdf764a0af996
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/sjdxa/attachments/20210814/fa74722f/attachment.html>

From n2oo at comcast.net  Tue Aug 24 10:59:33 2021
From: n2oo at comcast.net (Bob Schenck N2OO)
Date: Tue, 24 Aug 2021 10:59:33 -0400
Subject: [SJDXA] FW: Zoom meeting invitation - SJDXA August Meeting
In-Reply-To: <B9644AE7-1777-4C77-9DD1-4EC165892A3E@gmail.com>
References: <B9644AE7-1777-4C77-9DD1-4EC165892A3E@gmail.com>
Message-ID: <001601d798f8$a67dc290$f37947b0$@comcast.net>

SJDXA ZOOM MEETING TONIGHT 7:30 PM
ZOOM login info below! Thanks again Tom N2XW

Regards,
Bob Schenck, N2OO

-----Original Message-----
From: Tom Preiser N2XW [mailto:tjpreiser at gmail.com] 
Sent: Tuesday, August 24, 2021 10:42 AM
To: Bob Schenck
Subject: Zoom meeting invitation - SJDXA August Meeting 

SJDXA is inviting you to a scheduled Zoom meeting. 

Topic: SJDXA August Meeting
Time: Aug 24, 2021 07:30 PM Eastern Time (US and Canada) 

Join Zoom Meeting
https://us02web.zoom.us/j/86002755549?pwd=bmlCYWZUTGJRQ2llVkhma3ZFZjFVdz09 

Meeting ID: 860 0275 5549
Passcode: 150712
One tap mobile 
+13017158592,,86002755549#,,,,*150712# US (Washington DC) 
+13126266799,,86002755549#,,,,*150712# US (Chicago)

Dial by your location 
        +1 301 715 8592 US (Washington DC) 
        +1 312 626 6799 US (Chicago) 
        +1 646 558 8656 US (New York) 
        +1 253 215 8782 US (Tacoma) 
        +1 346 248 7799 US (Houston) 
        +1 669 900 9128 US (San Jose)
Meeting ID: 860 0275 5549
Passcode: 150712
Find your local number: https://us02web.zoom.us/u/kdFycEohLu 



-------------- next part --------------
A non-text attachment was scrubbed...
Name: Zoom-Meeting.ics
Type: text/calendar
Size: 1202 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/sjdxa/attachments/20210824/35d492a5/attachment.ics>

From n2oo at comcast.net  Tue Aug 24 18:43:23 2021
From: n2oo at comcast.net (Bob Schenck N2OO)
Date: Tue, 24 Aug 2021 18:43:23 -0400
Subject: [SJDXA] Summer DXCC Challenge update
Message-ID: <00fc01d79939$733bbf40$59b33dc0$@comcast.net>

As of today (Aug 24) we have 6 members who have accomplished the Summer DXCC
Challenge:

 

N2OO

NY3B

W1GD

W2TT

KZ2I

KS3F

 

 

Still plenty of time!

 

See ya' in the Pileups!

73!

Bob Schenck, N2OO

President SJDXA

GO SJDXA!!! www.sjdxa.org

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/sjdxa/attachments/20210824/b89c0edd/attachment.html>

From tjpreiser at gmail.com  Tue Aug 24 20:05:42 2021
From: tjpreiser at gmail.com (Tom Preiser (N2XW))
Date: Tue, 24 Aug 2021 20:05:42 -0400
Subject: [SJDXA] Estate Sale
In-Reply-To: <572f6801-b4a2-d498-b135-27e532586f12@wx2nj.info>
References: <169DB5676C9DCC7E.18432@groups.io>
	<572f6801-b4a2-d498-b135-27e532586f12@wx2nj.info>
Message-ID: <CAFcWgJESd0RM8ErS0F2sf_sdsSwzj8Z1SgZnSPcmM-QgJ2k2yQ@mail.gmail.com>

Ocean County ARES is acting as a clearing house for two significant estate
donated items of interest. One is a US Tower, Motorized 4 section, Model
HDX-572MDPL, 72 foot height Tower and the second is an Alpha 9500,
Microprocessor Controlled HF Linear Amplifier.



The tower is located at a residence in Lakewood, NJ and must be removed and
transported by the buyer. The tower is a tilt-over design and there is room
to fit a vehicle in the back yard of the property.



The Alpha 9500 Amplifier is in the possession of Ocean County ARES and
tests 100 percent operable. It was completely overhauled by the
manufacturer in 2016 and looks like the day it was made. Alpha, made by RF
Concepts, is currently closed due to COVID and the 9500 is on backorder for
many that want it. It is rated for 1500 watts output with 50 watts input.
The power input can be 120 VAC, but the output would be limited to 1000
watts. For full output, a 220 VAC, 20 amp supply is needed. The unit is
rated for continuous key down service. The output tube is a 8877 high-mu
external-anode triode ceramic design. The operating frequency is 1.8 to
29.7 MHz (other than the 60 meter band). The unit can also be PC controlled
using software by RF Concepts.


Ocean County ARES is asking $1500 for the tower as you see it and $4000 for
the amplifier. All proceeds go to Ocean County ARES. The amp would be
delivered to any SNJ operator since the power transformer MUST be removed
for transport. Shipping the unit would not be a good idea.


If interested, contact WX2NJ (WX2NJ at WX2NJ dot INFO)

-- 
73, Bob, WX2NJ (Amateur)
Hamshack Hotline 5649
ECARS 21072 Life Member
PG00016133 (General Radiotelephone/Radar)
Ocean County ARES Coordinatorwww.wa2res.comhttps://www.wx2nj.info


_._,_._,_
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/sjdxa/attachments/20210824/920ec5f8/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: lllfdlhjjjcikjoj.jpg
Type: image/jpeg
Size: 98433 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/sjdxa/attachments/20210824/920ec5f8/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: nlhljdejcagcnehh.jpg
Type: image/jpeg
Size: 32453 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/sjdxa/attachments/20210824/920ec5f8/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 9500_prod_rev_october2010.pdf
Type: application/pdf
Size: 256757 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/sjdxa/attachments/20210824/920ec5f8/attachment-0001.pdf>

From n2oo at comcast.net  Wed Aug 25 11:48:18 2021
From: n2oo at comcast.net (Bob Schenck N2OO)
Date: Wed, 25 Aug 2021 11:48:18 -0400
Subject: [SJDXA] K3 Update
Message-ID: <008f01d799c8$a0ad7470$e2085d50$@comcast.net>

SJDXA members,

 

Here is the overview on the SJDXA K3 issue.

This was all reviewed with Elecraft tech support, fyi.

 

As you already know, we discovered that the radio was not receiving any
signals when using either ANT 1 or ANT 2 which are the two main SO239
antenna ports on the radio used when operating normal transceive.

Upon further testing we discovered that the radio was receiving OK when
switching onto the RX ANT jack.

When the radio is switched to the RX ANT jack, it utilizes the main receiver
which is the same receiver as is used by ANT 1 and ANT 2 except that the
routing is different. When using the RX ANT jack, the routing is basically
direct to the main receiver board. However, when using the ANT 1 or ANT 2,
the routing first goes through the ATU and the RF Board before it gets to
the main receiver board. The second receiver board is used by the SUB
Receiver (I did not test it but asked Elecraft to do so)

Knowing this background, Elecraft tech support feels that the issue (based
on their experience) is on the RF Board pointing to two diodes but this is
not 100% certain. They have initially diagnosed the  problem being caused by
RF OVERLOAD. This "could" be from the second radio in our setup accidentally
transmitting into our K3. Or perhaps a static discharge while on the
transmit antenna. Since the RX ANT was being used, the main receiver board
was not connected directly ANT 1 or ANT 2, thus why the receiver board seems
to be OK.

 

This makes sense since the last times that this radio was in use was for the
2019/2020 160 Contest season. The station was shut down from March 2020
onward, and the radio was removed in the early Fall and stored in a tub in
my closet here at my house.  In all of these contests, the radio was used
exclusively using the RX ANT hooked up to the beverage antennas. We would
not have noticed this problem. When we brought it back and  tried to use it
a couple of months ago at the site, it was still setup for TX INH and RX ANT
switched on but when we tried to use it in regular transcieve, we could not
receive any signals.

 

Although Danny W2NO and Bob W2ARP offered to look at the radio, the
executive board decided to go ahead and send the radio to Elecraft for
repair and for an official diagnosis as to what caused the problem. This way
we "MIGHT" have grounds for submitting an insurance claim with our ARRL
equipment insurance. 

 

I have decided to handle the return/repair myself. I have received an RSA
from Elecraft and I am shipping the radio to them today. I will cover the
shipping and repair costs for now. If an insurance claim can be made, we
will handle that as well. When this is all done, if there is any expense
left over, I am opting to "ask" our membership to "pass the hat" and
contribute towards it if this is necessary. I do not want our treasury to
take a hit. So, when further details come along, I will share them with you.

 

 

See ya' in the Pileups!

73!

Bob Schenck, N2OO

President SJDXA

GO SJDXA!!! www.sjdxa.org

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/sjdxa/attachments/20210825/9c357db5/attachment.html>

From w2tcr at aol.com  Wed Aug 25 12:43:05 2021
From: w2tcr at aol.com (Sid Weinstein)
Date: Wed, 25 Aug 2021 12:43:05 -0400
Subject: [SJDXA] K3 Update
In-Reply-To: <008f01d799c8$a0ad7470$e2085d50$@comcast.net>
References: <008f01d799c8$a0ad7470$e2085d50$@comcast.net>
Message-ID: <5FF2D041-6F9C-4E81-A68D-4DD8413E4D7B@aol.com>

OK with me Bob.

Sent from my iPhone

> On Aug 25, 2021, at 11:48 AM, Bob Schenck N2OO <n2oo at comcast.net> wrote:
> 
> ?
> SJDXA members,
>  
> Here is the overview on the SJDXA K3 issue.
> This was all reviewed with Elecraft tech support, fyi.
>  
> As you already know, we discovered that the radio was not receiving any signals when using either ANT 1 or ANT 2 which are the two main SO239 antenna ports on the radio used when operating normal transceive.
> Upon further testing we discovered that the radio was receiving OK when switching onto the RX ANT jack.
> When the radio is switched to the RX ANT jack, it utilizes the main receiver which is the same receiver as is used by ANT 1 and ANT 2 except that the routing is different. When using the RX ANT jack, the routing is basically direct to the main receiver board. However, when using the ANT 1 or ANT 2, the routing first goes through the ATU and the RF Board before it gets to the main receiver board. The second receiver board is used by the SUB Receiver (I did not test it but asked Elecraft to do so)
> Knowing this background, Elecraft tech support feels that the issue (based on their experience) is on the RF Board pointing to two diodes but this is not 100% certain. They have initially diagnosed the  problem being caused by RF OVERLOAD. This ?could? be from the second radio in our setup accidentally transmitting into our K3. Or perhaps a static discharge while on the transmit antenna. Since the RX ANT was being used, the main receiver board was not connected directly ANT 1 or ANT 2, thus why the receiver board seems to be OK.
>  
> This makes sense since the last times that this radio was in use was for the 2019/2020 160 Contest season. The station was shut down from March 2020 onward, and the radio was removed in the early Fall and stored in a tub in my closet here at my house.  In all of these contests, the radio was used exclusively using the RX ANT hooked up to the beverage antennas. We would not have noticed this problem. When we brought it back and  tried to use it a couple of months ago at the site, it was still setup for TX INH and RX ANT switched on but when we tried to use it in regular transcieve, we could not receive any signals.
>  
> Although Danny W2NO and Bob W2ARP offered to look at the radio, the executive board decided to go ahead and send the radio to Elecraft for repair and for an official diagnosis as to what caused the problem. This way we ?MIGHT? have grounds for submitting an insurance claim with our ARRL equipment insurance.
>  
> I have decided to handle the return/repair myself. I have received an RSA from Elecraft and I am shipping the radio to them today. I will cover the shipping and repair costs for now. If an insurance claim can be made, we will handle that as well. When this is all done, if there is any expense left over, I am opting to ?ask? our membership to ?pass the hat? and contribute towards it if this is necessary. I do not want our treasury to take a hit. So, when further details come along, I will share them with you.
>  
>  
> See ya' in the Pileups!
> 73!
> Bob Schenck, N2OO
> President SJDXA
> GO SJDXA!!! www.sjdxa.org
>  
> ______________________________________________________________
> SJDXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/sjdxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:SJDXA at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/sjdxa/attachments/20210825/b7a9db3c/attachment-0001.html>

From w1gd at aol.com  Wed Aug 25 14:20:52 2021
From: w1gd at aol.com (w1gd at aol.com)
Date: Wed, 25 Aug 2021 18:20:52 +0000 (UTC)
Subject: [SJDXA] K3 Update
In-Reply-To: <008f01d799c8$a0ad7470$e2085d50$@comcast.net>
References: <008f01d799c8$a0ad7470$e2085d50$@comcast.net>
Message-ID: <550981418.445472.1629915652633@mail.yahoo.com>

I concur shipping back to Elecraft is the right approach.
I had spent some time looking at how they switch antennas between the Main antenna and the Aux antenna as well as between the main receiver and sub-receiver.? I was trying to figure out how to easily switch my receive antennas between the main receiver and sub-receiver (so I could use diversity). I did find a fairly simple way.? But I also did find that the built-in protection from high RF is only good for a watt or two.? So, it does make sense that either somehow someone transmitted into the main receiver or that lightning/snow static is the culprit. (My vote is for lightning.)? I remember an Acom box that should have prevented transmitting into the K3.? To use diversity, I believe the Beverages are routed to the Main receiver (via the KXV3 module) and the HiZ is connected to the sub-receiver. (At least, that's what I recommended the last time I was down there in 2019.) All of those had outboard protection boxes, too.
I've survived Henri pretty well.? The rope holding the upper horizontal leg of my 160M Double-L wore through so I'm off 160.? Soon a it cools down some, I shoot up another rope.
73,
Gerry, W1GD


-----Original Message-----
From: Bob Schenck N2OO <n2oo at comcast.net>
To: 'SJDXA-LIST' <sjdxa at mailman.qth.net>
Sent: Wed, Aug 25, 2021 11:48 am
Subject: [SJDXA] K3 Update

<!--#yiv5976801896 _filtered {}#yiv5976801896 #yiv5976801896 p.yiv5976801896MsoNormal, #yiv5976801896 li.yiv5976801896MsoNormal, #yiv5976801896 div.yiv5976801896MsoNormal {margin:0in;margin-bottom:.0001pt;font-size:11.0pt;font-family:"Calibri", "sans-serif";}#yiv5976801896 a:link, #yiv5976801896 span.yiv5976801896MsoHyperlink {color:blue;text-decoration:underline;}#yiv5976801896 a:visited, #yiv5976801896 span.yiv5976801896MsoHyperlinkFollowed {color:purple;text-decoration:underline;}#yiv5976801896 span.yiv5976801896EmailStyle17 {font-family:"Calibri", "sans-serif";color:windowtext;}#yiv5976801896 .yiv5976801896MsoChpDefault {font-family:"Calibri", "sans-serif";} _filtered {}#yiv5976801896 div.yiv5976801896WordSection1 {}-->SJDXA members, ?Here is the overview on the SJDXA K3 issue.This was all reviewed with Elecraft tech support, fyi. ?As you already know, we discovered that the radio was not receiving any signals when using either ANT 1 or ANT 2 which are the two main SO239 antenna ports on the radio used when operating normal transceive.Upon further testing we discovered that the radio was receiving OK when switching onto the RX ANT jack.When the radio is switched to the RX ANT jack, it utilizes the main receiver which is the same receiver as is used by ANT 1 and ANT 2 except that the routing is different. When using the RX ANT jack, the routing is basically direct to the main receiver board. However, when using the ANT 1 or ANT 2, the routing first goes through the ATU and the RF Board before it gets to the main receiver board. The second receiver board is used by the SUB Receiver (I did not test it but asked Elecraft to do so)Knowing this background, Elecraft tech support feels that the issue (based on their experience) is on the RF Board pointing to two diodes but this is not 100% certain. They have initially diagnosed the? problem being caused by RF OVERLOAD. This ?could? be from the second radio in our setup accidentally transmitting into our K3. Or perhaps a static discharge while on the transmit antenna. Since the RX ANT was being used, the main receiver board was not connected directly ANT 1 or ANT 2, thus why the receiver board seems to be OK. ?This makes sense since the last times that this radio was in use was for the 2019/2020 160 Contest season. The station was shut down from March 2020 onward, and the radio was removed in the early Fall and stored in a tub in my closet here at my house. ?In all of these contests, the radio was used exclusively using the RX ANT hooked up to the beverage antennas. We would not have noticed this problem. When we brought it back and ?tried to use it a couple of months ago at the site, it was still setup for TX INH and RX ANT switched on but when we tried to use it in regular transcieve, we could not receive any signals. ?Although Danny W2NO and Bob W2ARP offered to look at the radio, the executive board decided to go ahead and send the radio to Elecraft for repair and for an official diagnosis as to what caused the problem. This way we ?MIGHT? have grounds for submitting an insurance claim with our ARRL equipment insurance.  ?I have decided to handle the return/repair myself. I have received an RSA from Elecraft and I am shipping the radio to them today. I will cover the shipping and repair costs for now. If an insurance claim can be made, we will handle that as well. When this is all done, if there is any expense left over, I am opting to ?ask? our membership to ?pass the hat? and contribute towards it if this is necessary. I do not want our treasury to take a hit. So, when further details come along, I will share them with you. ? ?See ya' in the Pileups!73!Bob Schenck, N2OOPresident SJDXAGO SJDXA!!! www.sjdxa.org ?______________________________________________________________
SJDXA mailing list
Home: http://mailman.qth.net/mailman/listinfo/sjdxa
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:SJDXA at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/sjdxa/attachments/20210825/274929d5/attachment.html>

From n2oo at comcast.net  Tue Aug 31 18:55:33 2021
From: n2oo at comcast.net (BobSchenck)
Date: Tue, 31 Aug 2021 18:55:33 -0400
Subject: [SJDXA] K3 update
Message-ID: <0B03A47E-56AC-45A0-97C4-43F4F67D6288@comcast.net>

SJDXA members,
Just reporting that our K3 has arrived at Elecraft today. 

73
Bob Schenck, N2OO 
Sent from my Apple portable radio device

From john.bodine at gmail.com  Tue Aug 31 22:02:39 2021
From: john.bodine at gmail.com (John Bodine)
Date: Tue, 31 Aug 2021 22:02:39 -0400
Subject: [SJDXA] K3 update
In-Reply-To: <0B03A47E-56AC-45A0-97C4-43F4F67D6288@comcast.net>
References: <0B03A47E-56AC-45A0-97C4-43F4F67D6288@comcast.net>
Message-ID: <CAFJ4jdbBSOF0BaiydmfhakG_Ju8-VWWzbiHgix1zuwqLRBrXyw@mail.gmail.com>

Thanks, Bob. E-craft will get it right.

On Tue, Aug 31, 2021 at 6:55 PM BobSchenck <n2oo at comcast.net> wrote:

> SJDXA members,
> Just reporting that our K3 has arrived at Elecraft today.
>
> 73
> Bob Schenck, N2OO
> Sent from my Apple portable radio device
> ______________________________________________________________
> SJDXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/sjdxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:SJDXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


-- 

Later,
        John Bodine/WU2E
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/sjdxa/attachments/20210831/43a73bb6/attachment-0001.html>

