[SixClub] FW: 6m beacon parts for Motorola Maxar 80 model D51TSA2300AK

[D. Howard Bingham]

KE5APJ still hanging it there, have "Six Club" numbered certificate 
framed in storage with a plethora

of other equipment at nephews house, had to move from original location 
in 2014 due to apartment property having been sold.

73

D. Howard Bingham, ke5apj

--

On 6/4/2019 3:03 PM, Mr. Richard Joey Fiero II ARS. W5TFW wrote:
> YES, it still works just nothing going on !   W5TFW
>
>
> -----Original Message-----
> From: sixclub-bounces at mailman.qth.net
> [mailto:sixclub-bounces at mailman.qth.net] On Behalf Of Jerry W9FS
> Sent: Tuesday, June 04, 2019 2:10 PM
> To: World Wide Six Meter Club
> Subject: Re: [SixClub] FW: 6m beacon parts for Motorola Maxar 80 model
> D51TSA2300AK
>
> TEST it has been a year from the last msg is this still active?
>
>
> ----- Original Message -----
> From: Mr. Richard Joey Fiero II ARS. W5TFW <joeyw5tfw at gmail.com>
> Reply-To: World Wide Six Meter Club <sixclub at mailman.qth.net>
> To: 'World Wide Six Meter Club' <sixclub at mailman.qth.net>
> Sent: 6/22/2018 4:01:35 PM
> Subject: [SixClub] FW: 6m beacon parts for Motorola Maxar 80 model
> D51TSA2300AK
> ____________________________________________________________________________
> ____
>
> To all. The BEACON is down on V44.
>
> Can anyone help with these REQUESTS ?
>
>
>
>                                       REGARDS  Joey
>
>
>
> From: Trevor Joel Liburd...( v44kai ) [mailto:v44kai at gmail.com]
> Sent: Friday, June 22, 2018 1:45 PM
> To: Joey Fiero
> Subject: Fwd: 6m beacon parts for Motorola Maxar 80 model D51TSA2300AK
>
>
>
>
>
> ---------- Forwarded message ----------
> From: Trevor Joel Liburd...( v44kai ) <v44kai at gmail.com>
> Date: Wed, Jun 20, 2018 at 2:35 AM
> Subject: 6m beacon parts for Motorola Maxar 80 model D51TSA2300AK
> To: joe v <malosgv at gmail.com>
>
>
>
>
>
>
> Hi Joey,
>
> I hope you and the family are doing okay,
>
> I just wanted to touch base, concerning the six meter beacon here, I don't
> remember the folks that had sent it to me, however, it was a beacon group
> which you may be a part of,  we had a few power issues a few weeks ago, we
> were able to get to the repeater and beacon site yesterday since then, only
> to find the power supply got hit and had 23 volts at its outputs,  all the
> repeaters and the beacon fried, very surprising the SCR didn't fire to
> protect the equipment, such for this Astron 50M
>
> I started looking at the Maxar-80 6m beacon radio, which is the first I
> decided to check, as we are in the E season, I don't have a manual, as I
> would like to get one, the transistors listed, are thus far bad, and I would
> like to get some as well (M1102, M1130, M9654, and 9641), there is a burnt
> resistor, I will need the schematic to locate it value, I took a photo of
> its location on the board,
>
> Can you kindly send out a notice to the 6m beacon group, please, it would be
> good to get a complete working 6m beacon and antenna system, this Maxar-80
> has worked for many many years without any problem at all, I will prefer to
> get two more of these radio as 6m beacon on v4, this radio and the antenna,
> worked for more than 18 years flawlessly,
>
> Please send them also, my email address so they can contact me directly, I
> will still like to fix this broken one, so i will like to get some parts for
> it, thanks in advanced Joey,
>
> I am still not yet settled from my fire losses of last year, but are
> rebuilding little by little,
>
>
> Thanks Boss Joey,
>
> v44kai.....Joel.

-- 
D. Howard Bingham   *Email: ke5apj at earthlink.net
2722 Wisdom Drive   *Email: howardb at hal-pc.org
Deer Park, Texas    *Email: BinghamDavidH at gmail.com