[SixClub] FW: 6m beacon parts for Motorola Maxar 80 model D51TSA2300AK

[Mr. Richard Joey Fiero II ARS. W5TFW]

To all. The BEACON is down on V44.

Can anyone help with these REQUESTS ?

 

                                     REGARDS  Joey

 

From: Trevor Joel Liburd...( v44kai ) [mailto:v44kai at gmail.com] 
Sent: Friday, June 22, 2018 1:45 PM
To: Joey Fiero
Subject: Fwd: 6m beacon parts for Motorola Maxar 80 model D51TSA2300AK

 

 

---------- Forwarded message ----------
From: Trevor Joel Liburd...( v44kai ) <v44kai at gmail.com>
Date: Wed, Jun 20, 2018 at 2:35 AM
Subject: 6m beacon parts for Motorola Maxar 80 model D51TSA2300AK
To: joe v <malosgv at gmail.com>






Hi Joey,

I hope you and the family are doing okay, 

I just wanted to touch base, concerning the six meter beacon here, I don't remember the folks that had sent it to me, however, it was a beacon group which you may be a part of,  we had a few power issues a few weeks ago, we were able to get to the repeater and beacon site yesterday since then, only to find the power supply got hit and had 23 volts at its outputs,  all the repeaters and the beacon fried, very surprising the SCR didn't fire to protect the equipment, such for this Astron 50M 

I started looking at the Maxar-80 6m beacon radio, which is the first I decided to check, as we are in the E season, I don't have a manual, as I would like to get one, the transistors listed, are thus far bad, and I would like to get some as well (M1102, M1130, M9654, and 9641), there is a burnt resistor, I will need the schematic to locate it value, I took a photo of its location on the board,     

Can you kindly send out a notice to the 6m beacon group, please, it would be good to get a complete working 6m beacon and antenna system, this Maxar-80 has worked for many many years without any problem at all, I will prefer to get two more of these radio as 6m beacon on v4, this radio and the antenna, worked for more than 18 years flawlessly, 

Please send them also, my email address so they can contact me directly, I will still like to fix this broken one, so i will like to get some parts for it, thanks in advanced Joey, 

I am still not yet settled from my fire losses of last year, but are rebuilding little by little,
 

Thanks Boss Joey,

v44kai.....Joel.   
-- 

Trevor Joel Liburd (N.T.R.C. St. Kitts/Nevis)
www.ntrc.kn
v44kai.....Joel.




-- 

Trevor Joel Liburd (N.T.R.C. St. Kitts/Nevis)
www.ntrc.kn
v44kai.....Joel.