[SixClub] Six Meter gear followed me home from Dayton
KA2AEV at aol.com
KA2AEV at aol.com
Wed May 22 22:14:42 EDT 2013
Well with alittle practice she can get the turning radius down from 90
degrees!!!
In a message dated 5/22/2013 8:53:47 P.M. Eastern Daylight Time,
50MHz at rogerhalstead.com writes:
On 5/21/2013 9:58 PM, KA2AEV at aol.com wrote:
> Hey sit it on the mower and when you need to rotate it, just cut some
> grass!!!
>
I only have one arm that works and the lawnmower is one of those zero
turning radius machines. It takes two hands to operate and I do mean
two. You can't take either hand off the handles long enough to scratch
your nose. Wife remarked that when she tried that the mower had turned
90 degrees by the time she could grab the handle<:-))
But that big tower is just setting there...with a couple slopers leaning
off the side.
73
Roger (K8RI)
>
>
>
> In a message dated 5/21/2013 8:57:57 P.M. Eastern Daylight Time,
> 50MHz at rogerhalstead.com writes:
>
> On 5/21/2013 8:28 PM, qrv at kd4e.com wrote:
>> I should have known that someone would get me on that
>> careless phraseology!
>>
>> Can't you use a tuner to load-up a HF antenna on 6m?
>>
>
> I have a nearly 30' long 7L C3i on sawhorses in the back yard, but my
> wife complains about when mowing the yard, so I think I better pass on
> asking her to serve as a rotator.
>
> Actually, if I can get some one to install the rotator, mast and C3i,
> I'd be in business and ready to tram up the 3L 40. <:-))
>
>
> 73
>
> Roger
>
>> A simple dipole or vertical should be functional with
>> a ton of activity and any sort of decent propagation.
>>
>>> On 5/21/2013 8:13 PM, qrv at kd4e.com wrote:
>>>> A Gonset G-50 tried to follow me home from Dayton but
>>>> because some large gear didn't sell there simply was
>>>> no room in our Prius - so I resold it. ;-(
>>>>
>>>
>>> So how did you get home without the Prius?
>>>
>>> 73
>>>
>>> Roger (K8RI)
>>>
>>>
>>>> Meanwhile two 6m Gonset Communicators did make the trip,
>>>> an early silver model with the tuning eye and a white
>>>> Comm III.
>>>>
>>>> Both appear to be in working order.
>>>>
>>>> Has anyone seen a modification to put these on SSB or
>>>> DSB?
>>>>
>>>> Thanks!
>>>> 73, David KD4E
>>
>>
>>
>
>
> ______________________________________________________________
> SixClub mailing list
> Home: http://mailman.qth.net/mailman/listinfo/sixclub
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:SixClub at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> SixClub mailing list
> Home: http://mailman.qth.net/mailman/listinfo/sixclub
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:SixClub at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
SixClub mailing list
Home: http://mailman.qth.net/mailman/listinfo/sixclub
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:SixClub at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
More information about the SixClub
mailing list