[SixClub] Six Meter gear followed me home from Dayton

[Jerry W9FS]

You might try one of the old Heathkit SSB adapters (SB-10). some 
modification is going to be required to the 10 meter circuits. B&W made one 
as well, these took already good HF AM rigs to SSB. For sure it will be a 
project. They also made (i.e. HC-10 Hammerlund) receiver product detectors, 
just have to pay attention to the IF frequency. That would be a good project 
and while your at it you might add a RF stage.

--------------------------------------------------
From: <qrv at kd4e.com>
Sent: Tuesday, May 21, 2013 7:13 PM
To: "World Wide Six Meter Club" <sixclub at mailman.qth.net>
Subject: [SixClub] Six Meter gear followed me home from Dayton

> A Gonset G-50 tried to follow me home from Dayton but
> because some large gear didn't sell there simply was
> no room in our Prius - so I resold it.  ;-(
>
> Meanwhile two 6m Gonset Communicators did make the trip,
> an early silver model with the tuning eye and a white
> Comm III.
>
> Both appear to be in working order.
>
> Has anyone seen a modification to put these on SSB or
> DSB?
>
> Thanks!
> 73, David KD4E
>
>
> -- 
>
> Thanks! & 73, KD4E.com
>
> David Colburn - Nevils, Georgia USA
>
> Search with: duckduckgo.com
>
> Android for Hams: groups.yahoo.com/group/hamdroid
> Creative Tech: groups.yahoo.com/group/ham-macguyver
> Raspi Alternative: groups.yahoo.com/group/beagleboneblack/
>
> Restored to design-spec at Heaven's gate 1Cor15:22
> ______________________________________________________________
> SixClub mailing list
> Home: http://mailman.qth.net/mailman/listinfo/sixclub
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:SixClub at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html