[SixClub] Question on Amplifier

[Mike Pappas]

1500 watts TXPO
100 watts drive
1 input
2 outputs 
Metering: PA volts, PA amps, forward power peak, reflected power peak
Idiot LEDs: VSWR fault, Input Overload, high temp, TX, over current, over voltage, power supply fault and a couple more for good measure (you can never have enough blinking lights).
Solid state no tune

Mike Pappas
W9CN
advanceddigital at mac.com



On Feb 15, 2011, at 6:03 PM, Frosty wrote:

> I would like to take a survey of the 6 meter and vhf operators on the following:
> 
> WHAT WOULD YOU LIKE IN A 6 METER AMPLIFIER?
> 
> Power out:
> 1.500 watts
> 2.1000 watts
> 3.1500 watts
> 
> Drive:
> 1. 25 watts
> 2. 100 watts
> 
> Futures:
> 1. built in P/S
> 2. one input
> 3. one output
> 4.simple metering
> 5. Solid state/ Transistor.
> 
> What about 2 meters and 440?
> 
> 
> 
> 
> 
> Charles F. Frost
> Frosty K5LBU
> frosty1 at pdq.net
> ______________________________________________________________
> SixClub mailing list
> Home: http://mailman.qth.net/mailman/listinfo/sixclub
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:SixClub at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html