[SixClub] 50MHz MASTR II Repeater/Amp 100W

[Roger (K8RI)]

kd4e wrote:
> It may be good to copy your info to: KU8L
> since from his text it sounds as though he
> is not sure what he has and was guessing.
>
> doc
>
>   
>> Aint no repeater...just a stock lowband mobile..The front end section is not
>> anodized so it eventually would exhibit the "whiskers" issue...
>> Couldn't tell if it has the Noise Blanker
>>
>> $125 for a MII lowband high split mobile? I find them all the time for less
>> than $100!!
>> Can be converted to rptr....NB cannot be used in single/duplexed
>>     
What's NB? Noise Blanker?

73


Roger (K8RI)
>> site.....would have to split it with a UHF MII (or even a 2m MII now that
>> aux links are allowed....but WHY? Less problems going UHF) Also the PA deck
>> has to be turned down to 50-60watts MAX and I would also run a fan on it
>> just to be safe
>>
>> Chris
>> WB5ITT
>>
>>     
>>> swap.qth.com
>>>
>>>
>>>       
>> ----------------------------------------------------------------------------
>> ------------------
>>     
>>> * 50MHz MASTR II Repeater/Amp 100W*
>>>
>>> Have what I believe to be a 50MHz 100W MASTR II radio that is in
>>> nearly pristine condition. This is the brown handle version so should
>>> be free of the dendrite issue. The amp module looks unused--nothing
>>> burnt or discolored. All of the special jumpers and cables are attached.
>>> Purchased for a 6M project that went a different path.
>>> More pictures available.
>>> Asking 125.00 plus shipping.
>>>
>>> Listing #811727 by KU8L <http://www.qth.com/callsign.php?cs=KU8L>
>>> Submitted on 03/17/10
>>>       
>
>