[SixClub] Needs Work Alinco DX-70 HF + 6m Transceiver

[Eduardo Somoano C]

Dear friend  
I also have a very old Alinco DX-70TH and he needs repair.  
If you have some parts that you don't need and you can help me   
I will thank it to you a lot.  
  
Strong hug.
Eduardo. CO8LY

----- Original Message ----- 
From: "Richard J. Fiero II W5TFW" <joeyw5tfw at gmail.com>
To: <doc at kd4e.com>; "World Wide Six Meter Club" <sixclub at mailman.qth.net>
Sent: Tuesday, February 23, 2010 2:16 PM
Subject: Re: [SixClub] Needs Work Alinco DX-70 HF + 6m Transceiver


I think I have all the parts he mentioned.
                                             


                                                      A.R.S. W5TFW
                                                      Richard J. Fiero II
                                                      
                                                      www.6mt.com
                                                      www.w5tfw.com

 LIFE'S   TOUGH !

 It's even tougher, if you are STUPID !

                                          John Wayne
----- Original Message ----- 
From: "kd4e" <doc at kd4e.com>
To: "World Wide Six Meter Club" <sixclub at mailman.qth.net>
Sent: Tuesday, February 23, 2010 1:09 PM
Subject: [SixClub] Needs Work Alinco DX-70 HF + 6m Transceiver


> swap.qth.com
> 
>     Alinco DX-70 HF transceiver in fair condition. I won 
> this on ebay and the seller claimed it was in much better 
> condition than it was. The control head latches were broken 
> and electrical tape used to hold it on, kludegy but solid. 
> The multi-function switch is flakey making use a pain but 
> possible. The control buttons on the mic replace many of 
> these functions. The plastic inner volume knob is cracked 
> but still works. Some of the push buttons are stiff but do 
> work. The case paint is rough but no dents or dings.
>     Now the good stuff. The rig works on all bands and 
> modes and puts out full power. The LCD display is 100%. It 
> comes with the mic, original manual, power cord and mobile 
> mounting bracket. It's ugly but it works and would make a 
> good budget, mobile or backup rig. I prefer payment by 
> PayPal but will accept a USPS money order. Be aware you are 
> getting a beat up but working transceiver. Will add better 
> photo later. Asking $225 + $15 for shipping.
>     Listing #805980 - Submitted on 02/23/10 by Callsign
> 
> -- 
> 
> .Thanks! & 73, doc, KD4E
> .FS/Swap/Wanted: http://kd4e.com/swapn.html
> .Free OS : http://www.PuppyLinux.com
> .Personal: http://kd4e.com
> .            |_|___|_|
> .            | | & | |
> .       /\      {|
> .      /  \     {|
> .     /    \    {|
> .    /   @  \   {|
> .    |   |~_|~~~~|
> .    |   -| |    |
> .============\ # KD4E
> . Have an http://ultrafidian.com day!
> ______________________________________________________________
> SixClub mailing list
> Home: http://mailman.qth.net/mailman/listinfo/sixclub
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:SixClub at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
SixClub mailing list
Home: http://mailman.qth.net/mailman/listinfo/sixclub
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:SixClub at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html