[SixClub] Re: Interlacing 6M on a 10M beam?

[Randy Wing]

Why interlace?  Why not just make the 6m elements vertical?

Randy

-----Original Message-----
From: sixclub-bounces at mailman.qth.net
[mailto:sixclub-bounces at mailman.qth.net] On Behalf Of kd4e
Sent: Friday, March 07, 2008 12:48 PM
To: 6n2mtrham at comcast.net
Cc: AR29MHz-FM at yahoogroups.com; World Wide Six Meter Club;
AR52MHZ at yahoogroups.com
Subject: [SixClub] Re: Interlacing 6M on a 10M beam?

It sure would be helpful if someone on one of
these lists had a tested design that they could
share.

What I am really looking at is acquiring an 11M
beam and modifying it for 10M plus adding 6M.

Depending on the design I imagine it may even be
useful on 12M with a good tuner.

> It has been done, back in the 60s, I knew a guy that 
> had a 3 el on 10, interlaced with a 5 el on 6.
> gud luck, 73 Jerry W9FS
> 
>> Question:  Has anyone successfully interlaced 6M 
>> elements on a 10M beam?



-- 

Thanks! & 73, doc, KD4E
Free OS : http://www.ChurchPup.com
Based on: http://www.PuppyLinux.com
Personal: http://bibleseven.com/kd4e.html
             |_|___|_|
             | | & | |
                {|
        /\      {|
       /  \     {|
      /    \    {|
     /   @  \   {|
     |   |~_|~~~~|
     |   -| |    |
============\ # KD4E
______________________________________________________________
SixClub mailing list
Home: http://mailman.qth.net/mailman/listinfo/sixclub
Help: http://mailman.qth.net/faq.htm
Post: mailto:SixClub at mailman.qth.net