[SixClub] Band monitoring question

[Howard Bingham]

At 03:57 PM 5/17/2007, Doug Huchteman wrote:
>Some very good thoughts guys.  I'm going to order the ICE RF limiter 
>for both VHF and HF because it's a good idea and put a 2 position 
>coax switch (2nd position to a dummy load) on the trusty RCI5054 too.
>
>Doug KD5VHZ
--

In my mobile installation, I simply use a rotary switch to change 
between antennas, my 6m radio uses one of two, but NOT the same 
antenna as my 2m/70cm dual band radio..

I do have a tri-band antenna, but do not have the correct "duplexer" 
to use the two radios on the same antenna..

Then again, that is for a mobile installation with multiple antennas 
on a pickup truck..

Howard Bingham
KE5APJ  -   EL29gq

---

>----- Original Message ----- From: "bruce mallon" <wa4gch at yahoo.com>
>To: "World Wide Six Meter Club" <sixclub at mailman.qth.net>
>Sent: Thursday, May 17, 2007 12:43 PM
>Subject: Re: [SixClub] Band monitoring question
>
>
>UNLESS you are tring to use THE SAME antenna I dont
>see why these should not work My 6 meter loop and beam
>are 30 foot apart .....
>
>http://www.iceradioproducts.com/rfswitch.html#2
>
==