[SixClub] 1/2 inch UHF hardline connectors

[ttlambd at grandecom.net]

Doug
I have 1 ea. Andrew L5NF and 5 ea.  Andrew L5NM.

If you need them they are yours.....

Terry   ARS    WV5e


Quoting "Gene Brewer (KI6LO)" <ki6lo at mchsi.com>:

> Doug Huchteman wrote:
>
> > I'm upgrading all my 400UF and 9913 coax to Andrews 1/2 inch superflex
> > hardline and I'm in need of appropriate UHF connectors.  Does anyone
> > know of
> > a good and inexpensive source?  I've seen some, at a low price, at
> > Davis RF. Any info on these.
> >
> > Is there a benefit to using the grounding kits?
> >
> > Doug KD5VHZ
> >
> >
> > ______________________________________________________________
> > SixClub mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/sixclub
> > Help: http://mailman.qth.net/faq.htm
> > Post: mailto:SixClub at mailman.qth.net
> >
> Doug,
>
> Watch eBay for sellers dropping single or a couple hardline connectors.
> I find the N-type connectors for FSJ4-50B 1/2" Andrew heliax for $5 to
> $10 bucks on eBay.  The UHF connectors are a bit harder to find. If you
> have to have several UHF, you may have to order them from a parts house
> and then they will be higher $$$. I run the hardline into the shack with
> N-type and then connect a short run of 9913-F7 to the N connector with a
> standard UHF on the radio end.
>
> Gene KI6LO
> ______________________________________________________________
> SixClub mailing list
> Home: http://mailman.qth.net/mailman/listinfo/sixclub
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:SixClub at mailman.qth.net
>
>