[SixClub] PSK

Michael Smith [email protected]
Fri, 30 Jan 2004 09:57:17 -0600 

Try "Ham Radio Deluxe" at http://www.kns.ch/sysgem/hb9drv/index.htm it also
has rig control.

----- Original Message ----- 
From: "Randy Tipton" <[email protected]>
To: <[email protected]>
Sent: Friday, January 30, 2004 7:41 AM
Subject: RE: [SixClub] PSK


> Jerry, 50.290 is where the PSK31 operators look and call during opening.
> Hope to work you there. Also look for RTTY contacts on the same
> frequency. PSK31 is not the best mode for band openings because of the
> rapid phase shifts that occur during opening but the multi tones FSK
> modes like RTTY work well. That does not mean there is no PSK activity,
> just don't expect it to copy as well as it does on twenty meters. HiHi
>
> WinWarbler great program, I use it here for both PSK and RTTY along with
> the DXKeeper.
>
> Tip
>
> > -----Original Message-----
> > From: [email protected]
> [mailto:[email protected]]
> > On Behalf Of Jerry R
> > Sent: Thursday, January 29, 2004 6:07 PM
> > To: [email protected]
> > Subject: [SixClub] PSK
> >
> > Good evening to ALL:  Finally got rigblaster hooked to 706 and wanted
> to
> > know if i can run psk31 on 50.290. That is if i can figure out all the
> > details. Using WinWarble. Thanks in advance.  Jerry  kc0hln-en32
> >
> >
> > --- StripMime Report -- processed MIME parts ---
> > multipart/alternative
> >   text/plain (text body -- kept)
> >   text/html
> > The reason this message is shown is because the post was in HTML
> > or had an attachment.  Attachments are not allowed.  To learn how
> > to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> > ______________________________________________________________
> > SixClub mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/sixclub
> > Help: http://mailman.qth.net/faq.htm
> > Post: mailto:[email protected]
>
>
> ______________________________________________________________
> SixClub mailing list
> Home: http://mailman.qth.net/mailman/listinfo/sixclub
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:[email protected]