[SixClub] TVI on Sat TV

[N1OFZ]

First unhook everything from the TV.  Only the power cable should be 
connected.  Then see what happens.  If there is no TVI then hook up the 
dish with a good jumper.  Test again.  Then hook up vcr's, tivo's and 
AV systems one by one.

My neighbor has a 32" Sony that I get into like crazy on 6.  I bought 
filters & ferrite beads to no avail.  It was a complete waste of time 
and money.  I get into that TV without anything but the power hooked up 
and I'm only running 150W!

One other note: there are two ways to hook up the dish receiver to the 
TV.  First is the coax jumper.  Second is the s-video port for video 
and a standard rca cable for the audio.  If he is running a high end 
system he is probably using the s-video/rca combo as it is a much 
better picture than the coax.

Good luck,
Dana   N1OFZ


On Feb 3, 2004, at 8:57 PM, Dennis Kaylor wrote:

> yea the band is/was doing great but this guy lives north of me about 3 
> houses...grin
> i will look into the high quality jumper for him
> thanks