[SignalOne] WARC crystals

[we6a at wt.net]

I crystalled my CX-11 with ease.  Bought the crystals from Jan Crystal and 
worked the first time.  I have 5, 10, 17, 24 Mhz on the radio as well as all 
the other standard bands.  Was some time consuming to wire the pin diodes for 
the freq readout.  Nice "modern day" radio now.

Well just come join us on Saturday with whatever you have.

73's Doc WE6A


Quoting EDWARD SCHUMACHER <edwardschumacher at sbcglobal.net>:

> This list is for discussions regarding collecting, repair, use and sale of
> Signal/One radios and accessories. 
> 
> Documentation on Signal/One radios can be found at http://www.hamanuals.com
> and several other sites on the Web.
> I have installed crystals for WARC in my CX-7. I bought them from M H
> Electronics out in Cucamonga, CA. I could not find any info on the crystal
> specs, ie. cut, cap., etc. but I had a weak one that needed replacing and
> sent that in and MH was able to determine the type from it.
>  
> I also had a problem with the 10.1 MHz band which turned out to be a bad
> trimmer (yes, ceramic trimmers can go bad). Don't forget, the added crystals
> are socketed but all the rest are wire lead soldered and will require
> removing the frontend board to replace. Not too easy to find those sockets if
> you wanted to change over.
>  
> My CX-7 is still being worked on so if I check in to the net, it may be with
> my 40 year old homebrew HT-37. I have a problem with low output from the
> frontend board to the agc. otherwise the rest of the rig is working ok. 
>  
>  
>                                                                      Good
> Luck es 73,
>                                                                      Ed -
> WA9GQK
> _______________________________________________
> SignalOne mailing list
> SignalOne at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/signalone
>