[SignalOne] Re: More CX7A Drive (was:arcing)

[W2AGN]

On 18 Nov 2002 at 11:25, David Bertman wrote:

> 
> The simplest thing I know of is the connection to RF driver board.  It
> LIKES to get loose.  Also, though it is not the case here, I have seen
> drive problems due to a blown 34 volt supply.  With a system which uses
> the new audio PA (like John's) the driver is the only unit affected if
> this power goes.
> 
> Dave AB7B

I have disconnected and reconnected to rf connection. Also I have the 
same RF at the grid of the tube as I do at the output of the driver, so 
it is getting there. 

Had to put it aside for a day or two while I think about it. I did 
acquire a new driver transistor, should that somehow prove the problem, 
although I seem to have enough RF that it should at least show some 
drive.

--
+-++-++-++-++-+   John L. Sielke
|W||2||A||G||N|        http://www.w2agn.net [UPDATED]
+-++-++-++-++-+    Ex-K3HLU,TF2WKT,W7JEF,W4MPC,N4JS