[SFDXA] Ham items for sale

[wb4ehg]

Hello

I am selling these items for the XYL of Jeff Keating WB4KDH a silent key.

All of this equipment is in the Ft. Lauderdale, FL area. If you are out 
of the area we will discuss delivery/shipping.

1.E-Z Way tower

We _think_ this is the HD-40 model, there is no paperwork for it.

This is a narrow (8" per side) telescoping tower, a rotator will not fit 
inside.

It has two 20’telescoping sections.

It is on the ground, no take down needed.

It does not have the building attachment or the tilt over attachment.

The bottom of one leg is bent (see the pix).

The mast and wire rope are rusted but the tower is not.

We are asking $225

2.Drake MN2 Matching Network 
<http://k6jca.blogspot.com/2018/08/notes-on-antenna-tuners-drake-mn-4.html> 
(aka a tuner)

I cleaned the case & it is looking pretty nice, the sides have some 
minor marking

Inside it is immaculate.

I cleaned the switches and SWR pot with Deoxit and tested it with an 
antenna analyzer on it’s input and a dummy load on the output and it 
works perfectly. I then tested it with an Icom IC-7200 at full power and 
it works perfectly.

We are asking $200

3.Yaesu FT-901D HF transceiver 
<https://www.universal-radio.com/catalog/hamhf/ft901dm.html>.

This is an all mode (AM, FM, CW, SSB, FSK) HF (160m to 10m + WWV @ 
15MHz) transceiver.

Its transmitter input power is 180W for all modes except AK where it s 
80W [In the old days we measured power as input power, 180W is probably 
100W output]

The receiver covers the same frequency range as the transmitter.

*For the receiver:*

It has both digital and an analog frequency displays.

Curtis 8043 ICkeyer

Rejection tuning

Dual filter variable IF bandwidth tuning

Audio peak filter (APF) for CW

Noise Blanker

RF Attenuator

*For the transmitter*

It uses vacuum tubes for the transmit driver and power amp (6146’s)

VOX

RF Speech processor

Semi-break in CW

It has a built-in 120VAC power supply (you don’t have to spend $80 to 
$125 for a power supply).

You can also power it with 12VDC (cable not included but I will wire one 
for you)

It weighs 40lbs (the power transformer is heavy)

Physically it is in very good condition. It is missing the knob for the 
Loading control.

It does not include a mic.

It includes a CD with the user manual and the service manual

We are asking $350 for it which seems fair, prices on eBay are: $600, 
$899, $394; we will consider offers.

If you have questions or want more pictures please email me directly: 
wb4ehg at rjoerger.com <mailto:wb4ehg at rjoerger.com>

This is a picture of the actual radio:

73, Rich

  --

7 3, Rich, wb4ehg (my QRZ page) <http://qrz.com/db/wb4ehg>
Listening 146.520, 147.210, 147.330
ARRL (VE), DCARC, SFDXA, QCWA, FCG
FISTS #19877 & SKCC #21946
DMR: 3110287